dji Mini 3 Pro Fly More Kit Plus User Guide

June 12, 2024
DJi

dji Mini 3 Pro Fly More Kit Plus User Guide
Fly More Kit Plus

Carefully read this entire document and all safe and lawful practices provided before use.

OJI Mini 3 Pro ‘Two-Way Charging Hub (Figure A)

Charging Hub
Charging Hub

  1. Status LEDs: The status LEDs display battery levels for three seconds after the batteries are inserted into the charging hub The LEDs in an array blink successively during charging and change to solid green after the corresponding battery is fully charged
  2. Function Button: Press to check the battery power level. When both the intelligent flight battery and an external device are connected for charging, the battery will be charged before the external device. Press and hold the function button for two seconds to switch the charging priority.
  • Place the charging hub on a flat and stable surface when in use. Make sure the device is property insulated to prevent fire hazards
  • DO NOT attempt to touch the metal terminals on the hub Clean the metal terminals with a clean, dry cloth if there is any noticeable buildup

Specifications

Model Number CHX162-30
Supported Charger USB Power Delivery charger
Input (USB-Ct 5 V = 3 A, 9 V = 3 A, 12 V = 3 A
Output (USB) 5V :::-: 2A
Operating Temperature 5° to 40° C (41° to 104° F)

OJI Mini 3 Pro Propellers (Figure B)

Removing
Installation
Torque

  • Mount the marked propellers to the marked motors and the unmarked propellers to the unmarked motors.
  • Use the screwdrrver provided in the aircraft package to remove and install the screws. Unsuitable screwdrivers may damage the screws.
  • Use the new screws provided with the propellers when installing. DO NOT reuse old screws.
  • Use two propellers from the same package DO NOT mix with propellers from other packages.

OJI Mini 3 Pro Intelligent Flight Battery Plus

  • The weight of the aircraft exceeds 250 g after the OJI Mini 3 Pro Intelligent Flight ~ Battery Plus is installed Make sure you understand and comply with local laws and regulations and, if required, have obtained corresponding approval and clearance from the related government agencies before flight. 4
  • When flying higher than 3,000 m (9,843 ft) above sea level With the OJI Mini 3 Pro Intelligent Flight Battery Plus installed, the flight performance of the aircraft will be limited (such as flight height and flight speed). To ensure flight safety. only fly below 3,000 m (9,843 ft) above sea level and fly with caution while maintaining VLOS (visual line of sight) of the aircraft at all times
  • Increased aircraft weight affects the flight power. To avoid power shortage, do not install other payloads (such as propeller guards) after the OJI Mini 3 Pro Intelligent Flight Battery Plus is ,nstalled

Compliance Information

FCC Compliance Statement: Supplier’s Declaration of Conformity
Product name: 0., M1n1 3 Pro Two-Way Charging Hub
Model Number: CHX162-30
Responsible Party: OJI Technology, Inc.
Responsible Party Address: 201 S. Vtetory Blvd .. Burbank, CA 91502
Website: www.d11.com
We. OJI Technology, Inc., beng the responsible party, deelares that the above menttoned model was tested to demon ,trate complying with all applicable FCC rules and regulations. This device compiles with pan 15 of the FCC Rules. Operation is subiect to the follOWlng two condit10ns: (1) This device may not cause harmful interference, and (2) this device must accept any interference received. including interference that may cause undesired operation. Any changes or mod1ficat1ons not expressly approved by the party respoosible for compliance could void the user’s authonty to operate the equipment.

Compliance Statement: SZ OJI TECHNOLOGY CO., LTD. hereby declares that this device (CHX162-30) is In compliance with the essential requwements and other relevant provisions of Electromagnette Compatibiifty Regulations 2016. A copy of the GB Oflclarat,on of Conformity Is available online at www.dji.com /euro-comphance

Environmentally-friendly disposal
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.

QR Code
QR Code

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals