etac imm1055 Immedia NonSlip Roll Mat Instructions

etac imm1055 Immedia NonSlip Roll Mat

Product Information: Non-Slip Square

• Intended Use: Non-Slip Square can be used to increase friction under the feet, rear, and shoulder blades – anywhere increased friction is desired.
• Product Environment: Acute care, Long-term care, Home care
• Manufacturer: Etac
• CE Certification: Yes
• Warranty: Two-year warranty on material and manufacturing defects, provided that the product is used correctly.
• Expected Lifetime: The device has an expected service life of 1 to 2 years under normal use. The service life of the device varies depending on usage frequency, loads, and how often and how it is washed.
• Product Warning: Always check the product before use and after washing. Never use a defective product. If the product shows signs of wear and tear, it must be scrapped.
• Symbols: The manual contains symbols that indicate washing instructions, intended use, product information, and other important details.
• Special Features: Non-Slip Square provides the user with extra friction when moving/turning, etc.

Product Usage Instructions

1. Position Non-Slip Square where it is best for the individual user.
2. Use Non-Slip Square to increase friction under the feet, rear, and shoulder blades – anywhere increased friction is desired.
3. Always check the product before use and after washing.
4. Never use a defective product. If the product shows signs of wear and tear, it must be scrapped.
5. Read the instructions carefully before use.
6. It is important that carers receive instruction in manual handling. Etac offers advice and training for carers. For further information, contact Etac.

General

Thank you for choosing an Etac product

To avoid accidents and injury when moving and handling the products, please read this manual carefully. The person described as “the user” in this “Instruction for Use” is the person who is lying or sitting on the product. The carers are the people who maneuver the product. This symbol appears alongside the text in the manual. It draws the reader’s attention to points at which there may be a risk to the health and safety of the user or carer.
These products comply with the standards applicable for Class 1 products in the Medical Device Regulation (EU) 2017/745 on medical devices.
At Etac we strive to continually improve our products and therefore we reserve the right to make changes to products without prior warning. All measurements given on illustrations and similar material are for guidance only and Etac cannot be held liable for errors and defects.
The information given in this manual, including recommendations, combinations, and sizing, does not apply to special orders and modifications. If the customer makes adjustments, repairs or uses combinations not predetermined by Etac, the Etac CE certification and Etac warranty will not be valid. If in doubt, please contact Etac.
Warranty: Two-year warranty on material and manufacturing defects, provided that the product is used correctly.
Expected lifetime: The device has an expected service life of 1 to 2 years under normal use. The service life of the device varies depending on usage frequency, loads, and how often and how it is washed.
For further information on Etac Patient handling, see www.etac.com.
In case of an adverse event occurred in relation to the device, incidents should be reported to your local dealer and the national competent authority in a timely manner. The local dealer will forward information to the manufacturer.

Symbols in general

• Washing
• Do not bleach
• Tumble dry
• Iron
• Do not dry clean
• Medical device
• Disinfect / Wipe off
• Never leave it on the floor
• Risk of sliding down
• • Keep out of the sun
• Read the user manual
• Warning
• Production year, month and day
• Batch no./Lot no.
• User mass limit = maximum rated load
• The product can be scrapped according to national regulations
• Manufacturer
• CE -certification
• Keep dry
• Non sterile
  • Article number

Intended use
Non-Slip Square can be used to increase friction under the feet, rear, shoulder blades – anywhere increased friction is desired.

Intended environment
Acute care, Long-term care, Home care

Practical handling

Positioning

Non-Slip Square can be positioned where it is best for the individual user.
Use
Non-Slip Square provides the user with extra friction when moving/turning, etc.

Notice

Special features

• Always check the product before use and after washing.
• Never use a defective product. If the product shows signs of wear-and-tear, it must be scrapped.
• Read these instructions carefully.
• It is important that carers receive instruction in manual handling. Etac offers advice and training for carers. For further information, contact Etac.
• Always use the correct manual handling techniques.
• Encourage the user to assist where possible.
• To ensure that the user feels safe and that every manual handling is smooth, always plan the manual handling in advance.
• Never leave the product on the floor.
• Always conduct a risk assessment, and ensure that the assistive product can be used for the individual user and, in combination with other devices, that it is safe for the user and carers.
• If in any doubt – please contact Etac.

Material and cleaning

Material: Plastazote LD-45
The product should be checked regularly, preferably each time it is used, and especially after washing.
Check that there is no damage to seams or fabric.
Never try to repair a product yourself.
Never use a defective product.

Washing instructions:
This product can be wiped off with soapy water or cleaned with a solvent-free cleaning agent with a pH level between 5-9, or a 70% disinfection solution.

Products and accessories

Article no: Product Description:  Size (mm)
IM2248:Non-Slip Square :W380xL480xH5

Service Information

Inspection

First inspection:

• Is the packaging intact?

• Read the label on the packaging and check the article no. and product description

• Check that Short Instruction is enclosed – updated User Manual/Instruction for use can be downloaded from www.etac.com or contact your Etac Customer Service or the local dealer.

• Check the label on the product – does it include article no., product description, lot/batch no., cleaning instructions and supplier name?
  Periodic Inspection:

• Make sure that your Manual transfer system always is in a perfect condition.

• After wash – always check materials, stitching, handles, buckles.

• If the product shows signs of wear and tear, it must be removed from service immediately.

Visual inspection/Check the product:
Ensure that the materials, seams, stitching,handles, buckles are intact/faultless.

Mechanical load or stress/Test handles:
Draw hard in the handles in opposite directions and control the material, seams and stitching.

Test buckles:
Lock the buckle and draw in opposite directions, control the buckle and the stitching.
Stability test:
Try to bend the product verify that it feels firm, stable and solid.

Test low/high friction:
Place the product on a firm surface or a bed, place your hands on the material and test the friction by pushing your hands down into the product.
Low friction – slides effortlessly
High friction – no sliding/moving

Check:
Manual transfer aids with handles, straps and buckles:

Manual transfer aids with for sitting and lying transfer and with high or low friction:

• Production year, month and day
• The product can be scrapped in accordance with national regulations
• Read the user manual

References

• Etac - A world-leading developer of assistive devices

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>