EDIFIER X2s True Wireless Earbuds Headphones User Manual

X2s True Wireless Earbuds Headphones

Product Information

This product is a handheld vacuum cleaner designed for quick and easy cleaning of small messes and spills. It is cordless and rechargeable, making it convenient to use without being tethered to an electrical outlet. The vacuum comes with a detachable dustbin for easy emptying and cleaning. It also includes a crevice tool for reaching tight spaces and a brush attachment for cleaning upholstery and fabrics.

Product Usage

1. Charge the vacuum’s battery using the included charging cable until fully charged. This typically takes 4-6 hours.
2. Attach the desired attachment onto the end of the vacuum nozzle. Use the crevice tool for tight spaces and the brush attachment for upholstery and fabrics.
3. Turn on the vacuum using the power button located on the handle.
4. Begin cleaning by placing the nozzle over the mess or spill and moving it back and forth until it is fully cleaned up.
5. When the dustbin is full, detach it from the vacuum and empty it into a trash can. Be sure to clean the dustbin and attachments regularly to maintain optimal performance.
6. When finished using the vacuum, turn it off using the power button and store it in a cool, dry place until next use.

Power ON/OFF

1. Power ON when taken out of the case.
2. Power OFF when placed in the case

Note: If there is no Bluetooth connection for 10 minutes after power on, the earbuds will turn off automatically.

Pairing

1st Pairing

1. Taken out of the case. White and blue Indicator LEDs will blink alternately.
2. Select “EDIFIER X2s” in your device setting to connect. White LED will blink twice in 5 seconds when successfully.

Note: For subsequent use, the earbuds will automatically connect to the deviceused last time.

Reset

1. Taken out of the case.

2. Disconnected to an Bluetooth device.
   Press and hold the touch panel on either earbud for around 8s until blue LED blinks rapidly to clear the Bluetooth pairing record and turn off. If the left and right earbuds are connected, the other side will clear the Bluetooth pairing record and turn off either.

3. Placed back in the case and taken out of the case again.

4. Select “EDIFIER X2s” in your device setting to connect. White LED will blink twice in 5 seconds when successfull.

Left & Right connection

1. When earbuds are turned on and there is no Bluetooth connection and TWS connection, respectively tap the touch panel 5 times on both earbuds until white LED blinks slowly to enter
   TWS pairing mode. Once the left and right earbuds are connected successfully, white and blue LEDs will blink alternately to enter Bluetooth pairing mode.

2. Select “EDIFIER X2s” in your device setting to connect.White LED will blink twice in 5 seconds when successfullv.

Charging

Earbuds

1. When hearing a low battery prompt tone, please place the earbuds in the case for charging.
2. White LED on earbud is steady lit when charging and off when fully charged.

Charging Case

1. Please connect the case to power source with the included Type-C charging cable for charging.
2. White LED is steady lit when charging and off when fullv charaed.

Note: Please do not charge the earbuds when there is sweat or other liquids inside the charging port, which may damage the earbuds.

Controls

Note:

1. Images are for illustrative purposes only and may differ from the actual product.
2. Download Edifier Connect App for more customizable control settings.

Info

Scan and download Edifier Connect App

FCC statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IC statement: CAN ICES-003(B) / NMB-003(B).

• FCC ID: Z9G-EDF205
• IC: 10004A-EDF205

Declaration for EU
Frequency Band: 2400MHz – 2483.5MHz
RF Power Output: $13 dBm (EIRP) There is no restriction of use.

• Hereby, Edifier International Limited declares that the radio equipment type
• EDF200091 is in compliance with Directive 2014/53/EU. The full text of the
• EU declaration of conformity is available at the following internet address:
• https://www.edifier.com/int/eu-doc.html
  • Input: 5V =–200mA(Earbuds) 5V =– 1A(Charging case)

Model: EDF200123

• Edifier International Limited
• P.O. Box 6264
• General Post Office Hong Kong
• www.edifier.com

©2023 Edifier International Limited. All rights reserved. Printed in China

NOTICE

• For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice.
• Products of EDIFIER will be customized for different applications.
• Pictures and illustrations shown on this manual may be slightly different from actual product.
• If any difference is found, the actual product prevails.

For more information, please visit our website: www.edifier.com

References

• Headphones, Speakers | A Passion for Sound -【Edifier USA】

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>