METROPOLITAN N7754-143 Mosaic 4-Light Oil Rubbed Bronze Round Pendant Instruction Manual

June 12, 2024
Metropolitan

METROPOLITAN LOGO INSTALLATION INSTRUCTIONS
Item#N7754-143 (New. 05/19/2021)
READ AND SAVE THESE INSTRUCTIONS

N7754-143 Mosaic 4-Light Oil Rubbed Bronze Round Pendant

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.

HANGING THE FIXTURE

(Fig. 1)

METROPOLITAN N7754 143 Mosaic 4 Light Oil Rubbed Bronze Round Pendant -
FIXTURE

  1. Shut off power at the fuse box or circuit breaker box and remove the old fixture including the mounting hardware.
  2. Carefully unpack your new fixture and lay out all the parts in a clear area. Take care not to misplace any small parts necessary for installation.
  3. Loosening screws (I) to remove cloth shade (H) from metal frame (J).
  4. First remove plastic tape from cloth shade (H). Then place acrylic sheet (M) into the bottom of cloth shade (H).
  5. Install (4) four medium base bulbs (N) up to 60 watts each or CFL or LED equivalent (not included) in accordance with the fixture specification— DO NOT EXCEED THE MAXIMUM WATTAGE RATING!.
  6. Place cloth shade (H) into metal frame (J) and secure with screws (I).

COMPLETING THE INSTALLATION (Fig. 1)

  1. Determine the desired hanging height and thread rods (F1, F2 and F3) to all thread (G) on the fixture body. Attach canopy (D) by screwing onto rod (F1). Carefully pass the wires through each rod during assembly.
    Note: Remove all thread, if installing with one 6” rod only.

  2. Thread screws (A) into the pre-drilled holes in the circular strap (B). Space the same distance apart as the holes in canopy (D). The length of screws (A) may be adjusted if necessary.

  3.  Attach the circular strap (B) to the junction box (not included) with mounting screws (C) (Size: #8-32N*L0.5”). The side of the mounting plate with “GND” marked on it and two convex points must face out.

CONNECTING THE WIRES (Fig. 2)

METROPOLITAN N7754 143 Mosaic 4 Light Oil Rubbed Bronze Round Pendant -
WIRES

  1. Connect the electrical wires as shown in Fig. 2, making sure that all wire connectors are secured. If your junction box has a ground wire (green or bare copper), connect the fixture’s ground wire to it.
    Otherwise, connect the fixture’s ground wire directly to the circular strap (B) using the green screw provided.

  2. Tuck wire connectors neatly inside the junction box.

  3. Thread screws (A) into canopy (D), and secure with knobs (E).

  4. Lock metal frame (J) and metal frame (L) together with screws (K).

Your installation is now complete. Return power to the junction box and test the fixture.
Note: Illustration (Fig.1) on this manual is for installation purposes only. It may or may not be identical to the fixture purchased.

LA-3419E

Documents / Resources

| METROPOLITAN N7754-143 Mosaic 4-Light Oil Rubbed Bronze Round Pendant [pdf] Instruction Manual
N7754-143 Mosaic 4-Light Oil Rubbed Bronze Round Pendant, N7754-143, Mosaic 4-Light Oil Rubbed Bronze Round Pendant, Oil Rubbed Bronze Round Pendant, Bronze Round Pendant, Round Pendant, Pendant
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Metropolitan User Manuals

Related Manuals