Metropolitan N7381-613 Sutton 1 Light Polished Nickel Wall Sconce Instruction Manual

Metropolitan N7381-613 Sutton 1 Light Polished Nickel Wall Sconce

Product Information

The product is a light fixture with item number N7381-613, manufactured on May 15, 2022. The product comes with a mounting plate, ground screw, mounting screws (2), acrylic rods (4), cloth shade, glass shade, metal ring, and screw shell. The fixture can accommodate one medium base bulb up to 100 watts or CFL or lead equivalent (not included). The product has fixture wires in black or smooth, white or ribbed, and green or bare copper (ground). The product is designed to be mounted on a junction box.

Product Usage Instructions

1. Shut off power at the fuse box or circuit breaker box.
2. Remove the old fixture and its mounting hardware.
3. Unpack the new fixture and lay out all the parts in a clear area. Take care not to misplace any small parts necessary for installation.
4. Loosen screws (D) to remove mounting plate (A) from fixture body (C).
5. Attach mounting plate (A) to the junction box using mounting screws (B) (SIZE: #8-32N, L0.5). The side of the mounting plate marked GND must face out.
6. Connect the electrical wires as shown in Fig. 2, making sure that all wire connectors are secured. If your junction box has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to mounting plate (A) using green screw provided. Tuck wire connections neatly into the junction box.
7. Place fixture body (C) over the mounting plate (A) and secure with screws (D).
8. Place glass shade (E) followed by a metal ring (I) over a socket (G) and secure with screw shell (J).
9. Thread acrylic rods (H1), (H2) into coupler (F1),(F2).
10. Install (1) one medium base bulb (K) up to 100 watts each or CFL or LED equivalent (not included) in accordance with the fixture specification. DO NOT EXCEED THE MAXIMUM WATTAGE RATING!
11. Place cloth shade (L) onto glass shade (E).
12. Return power to the junction box and test the fixture.

Item# N7381-613 (New. 2022/05/15)

INSTALLATION INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

MOUNTING THE FIXTURE (Fig.1)

1. Shut off power at the fuse box or circuit breaker box and remove the old fixture including the mounting hardware.

2. Carefully unpack your new fixture and lay out all the parts in a clear area. Take care not to misplace any small parts necessary for installation.

3. Loosen screws (D) to remove mounting plate (A) from fixture body (C).

4. Attach mounting plate (A) to junction box (not included）using mounting screws (B) (SIZE: #8-32N, L0.5″). The side of the mounting plate marked “GND” must face out.
   CONNECTING THE WIRES (Fig. 2)

5. Connect the electrical wires as shown in Fig. 2, making sure that all wire connectors are secured. If your junction box has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to the mounting plate (A) using the green screw provided.

6. Tuck wire connections neatly into the junction box.
   FINISHING THE INSTALLATION (Fig.1)

7. Place fixture body (C) over the mounting plate (A) and secure with screws (D).

8. Place glass shade (E) followed by a metal ring (I) over a socket (G) and secure with screw shell (J).

9. Thread acrylic rods (H1), (H2) into coupler (F1),(F2).

10. Install (1) one medium base bulb (K) up to 100 watts each or CFL or LED equivalent (not included) in accordance with the fixture specification — DO NOT EXCEED THE MAXIMUM WATTAGE RATING! (NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE!)

11. Place cloth shade (L) onto glass shade (E).

Your installation is now complete. Return power to the junction box and test the fixture.
Note : The illustration (Fig.1) on this manual is for installation purposes only. It may or may not be identical to the fixture purchased.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>