METROPOLITAN N7521-716-L Smoked Iron and Soft Brass ADA Wall Sconce Wall Light Instruction Manual

METROPOLITAN N7521-716-L Smoked Iron and Soft Brass ADA Wall Sconce Wall

Light

Product Information

The product is an indoor light fixture with item code N7521-716-L. It comes with mounting hardware, including two mounting screws and a ground screw. The fixture is dimmable with ELV and/or LED compatible wall dimmer switches. It has wires for black/smooth, white/ribbed, and green/bare copper (ground). The fixture is designed to be mounted on a junction box, which is not included in the package. The installation illustration in the manual is for reference purposes only and may or may not be identical to the purchased product.

Product Usage Instructions

1. Shut off power at the fuse box or circuit breaker box.
2. Carefully unpack the new fixture and lay out all the parts in a clear area. Take care not to misplace any small parts necessary for installation.
3. Loosen screws (C) to remove mounting plate (A) from fixture body (D).
4. Attach mounting plate (A) to the junction box using mounting screws (B). The side of mounting plate (A) marked GND must face out.
5. Connect the electrical wires as shown in Fig. 2, making sure that all wire connectors are secured. If your junction box has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to mounting plate (A) using green screw provided.
6. Tuck the wire connections neatly into the junction box.
7. Place fixture body (D) over mounting plate (A) and secure with screws (C).
8. Turn on the power at the fuse box or circuit breaker box and test the fixture.

WARNING! SHUTPOWER OFF AT FUSE OR CIRCUIT BREAKER .
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.

MOUNTING THE FIXTURE

(Fig.1)

1. Shut off power at the fuse box or circuit breaker box and remove the old fixture including the mounting hardware.

2. Carefully unpack your new fixture and lay out all the parts in a clear area. Take care not to misplace any small parts necessary for installation.

3. Loosen screws (C) to remove mounting plate (A) from fixture body (D).

4. Attach mounting plate (A) to junction box (Not included) using mounting screws (B). The side of mounting plate (A) marked “GND” must face out.
   CONNECTING THE WIRES (Fig. 2)

5. Connect the electrical wires as shown in Fig. 2, making sure that all wire connectors are secured. If your junction box has a ground wire (green or bare copper), connect fixture’s ground wire to it. Otherwise, connect fixture’s ground wire directly to mounting plate (A) using green screw provided.

6. Tuck the wire connections neatly into junction box.
   FINISHING THE INSTALLATION (Fig.1)

7. Place fixture body (D) over mounting plate (A) and secure with screws (C).

Your installation is now complete. Return power to the junction box and test the fixture.

Note: Illustration (Fig.1) on this manual is for installation purposes only. It may or may not be identical to the fixture purchased.

Dimmable with ELV and/or LED compatible wall dimmer switches.

Item#N7521-716-L (New. 2022/05/19)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>