lowes TH-SF0189 Tribesigns Fanny 3 Light Instruction Manual
- June 12, 2024
- lowes
Table of Contents
lowes TH-SF0189 Tribesigns Fanny 3 Light
Product Information
The Wall Light SKU# TH-SF0189 is a fixture that can be installed on a wall to provide lighting. It has been rated for up to 60-watt maximum TYPE A bulbs or 13-watt compact fluorescent light bulbs or 9-watt LED bulbs. The product is safety listed for dry locations and may be dimmed with a standard incandescent dimmer. The package includes a junction box, single mounting bracket, canopy screws, fixture, fixture wires, leading wires, glass screws, socket, bulb, mounting plastic, and machine screw.
Usage Instructions
Before starting the installation of the light fixture, turn off the electrical
power. Ensure that wiring supplies are as required by local electrical code.
The product must be installed in accordance with the applicable installation
code by a person familiar with the construction and operation of the product
and the hazards involved. Inspect the wire insulation for any cuts, abrasions,
or exposed copper that may have resulted during shipping. If there is a defect
in the wire, do not attempt installation.
To clean the fixture, turn off the power, wait for it to cool, and wipe the
fixture with a clean, soft cloth. Never spray cleaner directly onto the
fixture.
When assembling the fixture, follow the steps provided in the instruction
manual:
- Attach the junction box to the wall.
- Attach the single mounting bracket to the junction box using the mounting screws (D and C).
- Attach the machine screw (P) to the center hole of the mounting bracket.
- Connect the fixture wires (G) to the supply wires (B) using UL listed wire nuts.
- Attach the canopy screws (E) to the canopy and then attach the canopy to the mounting bracket using the glass screws (J).
- Insert the bulb (L) into the socket (K).
- Attach the glass (M) to the fixture.
- Mount the fixture to the wall using the mounting plastic (N) and wall screws (Q).
If you encounter any problems with the fixture, refer to the troubleshooting section of the instruction manual:
| Problem | Possible Cause | Solution |
|---|---|---|
| The bulb will not light. | The power is OFF. | Ensure the power supply is ON. |
| There is a faulty wire connection. | Check the wiring. | Contact a qualified |
electrician.
The fuse blows or circuit breaker trips when the light is
turned ON.| The circuit breaker is OFF. There are crossed wires or the
power wire is grounding out.| Ensure the circuit breaker is in the ON
position. Check the
wire connections. Contact a qualified electrician.
SAFETY PRECAUTIONS:
- TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
- WIRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE.
- THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
- TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A CLEAN, SOFT CLOTH. NEVER SPRAY CLEANER DIRECTLY ONTO THE FIXTURE.
NOTE: Product may not look exactly as shown in figures.
CAUTION: Inspect the wire insulation for any cuts, abrasions, or exposed
copper that may have resulted during shipping. If there is a defect in the
wire, do not attempt installation.
This fixture has been rated for up to 60-watt maximum TYPE A bulbs or 13-watt
compact fluorescent light bulbs or 9-watt LED bulbs . To avoid the risk of
fire, do not exceed the recommended wattage. This product is safety listed for
dry locations.
This product may be dimmed with a standard incandescent dimmer.
Assembly Steps:
