VICOUSTIC Super Bass Extreme Ultra Elegant Bass Trap Instruction Manual

June 12, 2024
VICOUSTIC

Super Bass Extreme Ultra Elegant Bass Trap
Instruction ManualVICOUSTIC Super Bass Extreme Ultra Elegant Bass
Trap

Super Bass Extreme Ultra Elegant Bass Trap

MATERIAL NEEDEDVICOUSTIC Super Bass Extreme Ultra Elegant Bass Trap -
Included Not IncludedVICOUSTIC
Super Bass Extreme Ultra Elegant Bass Trap - Included 1

Stand Alone Assembly

VICOUSTIC Super Bass Extreme Ultra Elegant Bass Trap - Stand Alone
Assembly

Step by step corner installation.

VICOUSTIC Super Bass Extreme Ultra Elegant Bass Trap - step
cornerVICOUSTIC Super Bass Extreme
Ultra Elegant Bass Trap - fig

Ceiling Installation

VICOUSTIC Super Bass Extreme Ultra Elegant Bass Trap - fig
1Apply Flexi Glue Ultra on the back of the bottom panel of the Super Bass Extreme Ultra, near the edges. Do not wait longer than 10 minutes after applying the glue to attach the panel to the wall. Place the panel on the suitably chose position on the wall. Once in the desired place, press firmly against the wall for 15 seconds. VICOUSTIC Super
Bass Extreme Ultra Elegant Bass Trap - fig 2To ensure that you maximise the strength of the glue, don’t make any adjustments to the panel after bonding.
Wall and ceilling surfaces should be examined prior to installation, ensuring they are clean, smooth, and dry. If you have unpainted gypsum board surfaces, these should be primed with a drywall primer (or another material manufactured especially for the purpose), to equalize the absorption between the gypsum board face paper, joint compound, and skin coating materials. You should then apply the paint, and allow air circulation in order to dry the paint within the time frame specified by the paint manufacturer. Please ensure the paint is dry before installing the acoustic panel. Make sure the room has all the necessary conditions to receive the acoustic panels. After you apply the glue on the back of each acoustic panel, please ensure you hold the acoustic panel against the wall the required time (mentioned above), and ensure it stays fixed in place. This method is also applicable to ceiling installations.
Please note: For ceiling installation, it is recommend to leave some centimeters beyond the last panel to avoid it to loose contact with the VicFix J profile. In countries where earthquakes are likely to happen, it should be applied a blocking element such as a L profile to avoid the last panel to slide off the VicFix J profile. Vicoustic will not take responsibility for any mistakes / limitations occurring during installations or any damages resulting from falling panels.

Main Office, R &D & Logistics
Avenida do Pólo 3, Nº 159, Carvalhosa
4590-137 Paços de Ferreira, Portugal
T (+351) 255 136 746
Office
Rua Quinta do Bom Retiro Nº 16, Armazém 9
2820-690 Charneca da Caparica, Portugal
T (+351) 212 964 100
Info and Sales
E sales@vicoustic.com
www.vicoustic.com
© Vicoustic, 2023 | V3
No parts of this document might be copied and/or published without written consent of Vicoustic.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals