VICOUSTIC 5X59 VicStrip Square Kit Instruction Manual
- June 1, 2024
- VICOUSTIC
Table of Contents
VICOUSTIC 5X59 VicStrip Square Kit Instruction Manual
Included
- Before installing the panels, measure the wall where you are going to apply them. If necessary, make the necessary cuts to ensure a proper installation.
The cuts can be done as indicated below
- Longitudinal cut folowing the PET grove, with the help of a box cutter.
- Longitudinal cut on the laminated area, with the help of a circular saw with ~ 60-Tooth blade.
- Transversal cut with the help of a circular saw with ~ 60-Tooth blade.
- Round hole with the help of a hole saw.
Wall installation with screws – For application to plasterboard walls or
wooden structures, install the
VicStrip with the screws provided, inserting them into the panel grooves and
attaching them to the supporting wall or wooden structure
Wall installation with glue – For application on masonry or concrete walls, it
is recommended to appl glue (not included).
Apply the glue on the back of the acoustic panel, according to the diagram.
Place the panel on the suitably chosen position on the wall. Once in the
desired place, press it firmly against the wall.
To ensure that you maximise the strength of the glue, don’t make any adjustments to the panel after bonding.
Wall and ceilling surfaces should be examined prior to installation, ensuring
they are clean, smooth, and dry. If you have unpainted gypsum board surfaces,
these should be primed with a drywall primer (or another material manufactured
especially for the purpose), to equalize the absorption between the gypsum
board face paper, joint compound, and skin coating materials.
You should then apply the paint, and allow air circulation in order to dry the
paint within the time frame specified by the paint manufacturer. Please ensure
the paint is dry before installing the panel. Make sure the room has all the
necessary conditions to receive the panels.
Main Office, R&D & Logistics
Avenida do Pólo 3, Nº 159, Carvalhosa 4590-137 Paços de Ferreira, Portuga
Office
Rua Quinta do Bom Retiro Nº 16, Armazém 9
2820-690 Charneca da Caparica, Portugal
T (+351) 212 964 100
Info and Sales
© Vicoustic, 2023 | V1
No parts of this document might be copied and/or published without written consent of Vicoustic.