VICOUSTIC VMT 20 Single Aluframe Instruction Manual
- June 9, 2024
- VICOUSTIC
Table of Contents
VICOUSTIC VMT 20 Single Aluframe
MATERIAL NEEDED
Included
Not Included
INSTALLATION INSTRUCTION
-
Pull the pet strips off the back of the panel (only for Flat Panel VMT 2380X1190mm).
-
Cut the profiles to the desired length. Use the Wood strips to fix the profiles and guide the panels.
-
Before installing the panel, fix 2 wood stripes approximately 105cm from the previously fixed profile. This wood stripes will help to keep the panel away from the wall.
-
Slide the panel into the first profile.
-
Fix the second profile into the panel, fixing it on the outside rim with 3 pieces of wood stripes.
Full wall installation with Aluframe VMT Double
-
Start the installation from the bottom-right side (If cuted panels are going to be used it is recommended to start with these). Check if panels are levelled before inserting the Aluframe VMT Double on the first row.
-
Insert the panels on the Aluframe VMT Double. Repeat the process until the wall is complete.
ABOUT COMPANY
- Main Office, R &D & Logistics
- Avenida do Pólo 3, Nº 159, Carvalhosa
- 4590-137 Paços de Ferreira, Portugal
- T (+351) 255 136 746
- Office
- Rua Quinta do Bom Retiro Nº 16, Armazém 9
- 2820-690 Charneca da Caparica, Portugal
- T (+351) 212 964 100
- Info and Sales