aiwa RS-X 40 Diviner Play User Manual
- June 6, 2024
- Aiwa
Table of Contents
Japan estl951
RS-X 40 Diviner Play
User Manual
Important Safety Instructions
- Please do not place the device near any form of heat source.
- Please use the accessories specified by the manufacturer.
- Please refer all servicing/repairs to qualified personnel should there be any form of damage to the device.
- Keep this user manual for future reference/troubleshooting. 5. Please heed ALL safety cautions.
Safety Cautions
- Always keep the device AWAY from fire and heat sources.
- Do NOT attempt to disassemble or alter the device.
- Do NOT expose the device to excessive heat (Direct sun; etc.).
- Do NOT immerse the device into any form of liquids.
Unboxing
– RS-X40 Diviner Play Speaker
– Charging Adaptor
– Remote Control
Product Specifications
Model Number: RS-X40 Diviner Play
BT Version: VS.0
Power Output: 40Ω
Impedance: 40
Frequency Response: 35Hz – 20KHz
S/N Ratio: ≥80dB
Sensitivity: 400MV
Supports: BT, AUX, TF Card, USB, TWS| Supported Profiles: M P3, WMA, WAV, FIAC
Transmission Distance (Estimated): 10 Meters (No Obstacles)
DC Input Voltage/Current: 9V DC, lAt2A
Battery: 7.4V/ 6000mAH
Playback Time: 4 – 5 Hours
Charging Time: 4 – 5 Hours
Dimensions: 245.120.210mm
Weight: 28 Kg
---|---
Product Overview
1. USB Port
2. Master Volume Knob
3. Bass Adjustment Knob
4. Treble Adjustment Knob
5. Charging Indicator Light (Red while Charging, Green when Full Battery)|
6. Power ON/OFF
7. AUX -In
8. FIAUX indicator Light
9. Source Button
10. Play/Pause Button
11 Charging Port 9V
---|---
1. Mute
2. StandyBy Mode
3. 0-9 Number Keys
4. EQ Cycle between Sound Profiles: Classic/ Rock & Roll/Jazz.
5. Mode: Cycle between Audio Modes: BT/USB/AUX. 6. Volume +
7. Previous Track| 8. Play/Pause
9. Next Track
10. Volume –
11. BT Mode
12. USB Mode
13. AUX Mode
14. TWS Connect-on Button
---|---
Playback Sources
USB Playback: Insert USB into the designated port. playback will commence upon
pressing the play/pause button.
AUX Playback: Disconnect all BT devices before inserting the AUX cable and
connect it to the audio source to start.
Connecting the Product
- Turn on Bluetooth (BT) on your mobile device.
- Turn on the speaker.
- Search and connect to “RS-X40 Diviner Play” from your mobile device.
- Press and hold the Play/Pause button for 3-4 seconds to disconnect
TWS Function
- Turn on both speakers (Only compatible with the same model)
- Press TWS Button and both units will pair to each other automatically within Thirty (30) Seconds.
- Be sure to pair speakers to mobile devices via BT to commence playback. TWS also works via AUX and USB mode.
Battery & Charging
Charging the speaker:
Connect charging adaptor to the speaker and a suitable power source
Approximate charging time: 4-5Hours
Please fully charge up the speaker prior to first; time usage.
Troubleshooting
Unable to connect to device:
- Please ensure the speaker is not connected to other devices
- Please ensure the speaker is within 10m of the device
No sound is corning out of the speaker:
- Please ensure your device is connected to the speaker.
- Please ensure the music volume is at an audible level on both your mobile device and speaker.
Please refrain from using any damaged components. Contact your local
authorized AIWA distributor/customer, service, should you need any assistance.
The above playback & charging times are estimated values tested in a practical
environment and may vary upon individual usage habits.
Aiwa Electronics Intl Co., Ltd.
Explore more at www.int-aiwa.com
Develop in Japan
Aiwa Electronics Intl Co., Ltd.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>