VICOUSTIC VMT Mega Bass Trap Kti Instruction Manual
- June 9, 2024
- VICOUSTIC
Table of Contents
VICOUSTIC VMT Mega Bass Trap Kti Instruction Manual
MATERIAL NEEDED
Included
Not Included
Assembly Instructions
-
Use the gauge provided to mark the holes for fixing it, according to the diagrams
-
If necessary, open the holes in the marked places, and apply the wall plugs. Fix the profile indicated, with screws suitable for the wall where you are making the installation.
-
Repeat the same steps to make the markings on the another wall
-
After installing the second profile, fix the protection bars with the metallic screws provided.
-
If necessary, open the holes in the marked places, and apply the wall plugs. Fix the Bass Trap base beneath the profiles, with screws suitable for the wall where you are making the installation
-
Fix the cover bracket, with screws suitable for the wall where you are making the installation.
-
Install the VMT Panel.
-
Fix the finishing profiles with 20 the paintend screws supplied.
-
Install the Bass Trap cover.
Support
Main Office, R &D & Logistics
Avenida do Pólo 3, Nº 159, Carvalhosa
4590-137 Paços de Ferreira, Portugal
Office
Rua Quinta do Bom Retiro Nº 16, Armazém 9
2820-690 Charneca da Caparica, Portugal
T (+351) 212 964 100
Info and Sales
E sales@vicoustic.com
© Vicoustic, 2022 | V2
No parts of this document might be copied and/or published without written
consent of Vicoustic
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>