Pro sKit SS-593 Series Smoke Absorber User Manual
- June 3, 2024
- Pro sKit
Table of Contents
SS-593 Series Smoke Absorber
User Manual
User’s Manual
SS-593 Series Smoke Absorber
Instruction Manual
SS-593 Series Smoke Absorber is a portable and desktop smoke eater, easy to place and move, low noise and long life service. It is designed to absorb 80% of potentially harmful contaminants that are released with the smoke while soldering for protecting solders’ health. Filtration is accomplished with an activated carbon-impregnated urethane filter. SS-593 is a newly developed product with a high performance fan and an activated carbon filter designed to absorb flux and lead fumes
Safety Note
The appliance is not intended for use by persons(including children)with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
Warning
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Please make sure Smoke Absorber is disconnected with power supply before taking off the protective apparatus.
Specification
Item No. | SS-593A | SS-593B | SS-593H |
---|---|---|---|
Voltage & Watt | 110-120V 23W | 220-240V 23W | 220-240V 23W |
Power code | A type 1.3M | 1B type 1.3M | H type 1.3M |
Capacity | 1 m3/min(max) | ||
Dimension | 220’270’168mm | ||
Weight | 1,400g | ||
Accessories | Filter (2 Pieces) |
Optional Accessories
Activated-Carbon Filter
Item No | 5SS-593-F |
---|---|
Size | 130x130x10mm |
Amount of activated-carbon filter | 7g |
Max. absorbing weight of noxious
components per one filter| 2g
Operating Instruction
- Open the Filter Guide, and install the activated carbon filter.
- Then close the filter guide
- Loosen the knob and adjust the angle
Replacing the filter
Under normal operating conditions, the filter should be replaced since
absorption capacity decline.
The filter may also need replacement when the dust adheres. (Never allow the
filter to become wet.)
PROKIT’S INDUSTRIES CO., LTD
https://www.prokits.com.tw
E-mail: pk@mail.prokits.com.tw
©2021 Prokit’s industries Co., Ltd.
All rights reserved. 2021001(C)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>