nVent RPS50H6EG Rooftop Pyramid 50 Foam Based Support Owner’s Manual
- September 12, 2024
- nVent
Table of Contents
nVent RPS50H6EG Rooftop Pyramid 50 Foam Based Support
Specifications
- Material: Steel; Polyethylene
- Finish: Electrogalvanized
- Static Load Safety Factor: 3:1
- Height (H): 152 mm
- Length (L): 264 mm
- Width (W): 127 mm
- Static Load (F): 220N
Product Information
The Rooftop Pyramid 50 Foam-Based Support, EG, 6 (Catalog Number RPS50H6EG) is designed to replace slow and labor-intensive installation methods. It supports pipe, conduit, cable tray, and equipment on roofs and below raised floors. The product allows for easy load capacity increase by combining similar nVent CADDY Pyramid supports. It features a design that protects the roof membrane while absorbing shock and vibration without absorbing water. The metal cover protects against weather elements and environmental conditions like bird damage.
Product Usage Instructions
Installation
- Ensure that the surface where the support will be placed is clean and free of debris.
- Position the Rooftop Pyramid support in the desired location.
- Secure the support in place using appropriate fasteners according to the installation instructions.
Maintenance
Regularly inspect the support for any signs of damage or wear. Replace any
damaged components immediately to ensure continued performance.
Load Capacity Adjustment
To increase the load capacity, combine multiple similar nVent CADDY Pyramid
supports following the manufacturer’s guidelines.
Safety Precautions
Always follow nVent’s product instruction sheets and training materials for
proper installation and use. Failure to do so may result in product
malfunction, property damage, injury, or voiding of the warranty.
FAQ
Q: Can the Rooftop Pyramid support be used for heavy equipment?
|A: The Rooftop Pyramid support is designed to support pipe, conduit, cable
tray, and equipment within its specified load capacity. For heavy equipment,
consult the manufacturer’sguidelines or consider combining multiple supports
for increased capacity.
Q: How can I ensure the longevity of the product?
A: Regular inspection, proper installation, and prompt replacement of any
damaged components are key to ensuring the longevity and performance of the
Rooftop Pyramid support.
FEATURES
Replaces slow and labor-intensive installation methods Supports pipe, conduit, cable tray, and equipment on roofs and below raised floors Easily increases load capacity by combining similar nVent CADDY Pyramid supports Protects the roof membrane while absorbing shock and vibration, without absorbing water Metal cover protects against weather and other environmental conditions, such as bird damage
PRODUCT ATTRIBUTES
- Material: Steel; Polyethylene
- Finish: Electrogalvanized
- Static Load Safety Factor: 3:1
- Height (H): 152 mm
- Length (L): 264 mm
- Width (W): 127 mm
- Static Load (F): 220N
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Instruction sheets are
available at www.nvent.com and from your nVent
customer service representative. Improper installation, misuse, misapplication
or other failure to completely follow nVent’s instructions and warnings may
cause product malfunction, property damage, serious bodily injury and death
and/or void your warranty.
North America +1.800.753.9221 Option 1 – Customer Care Option 2 –
Technical Support
Europe Netherlands: +31 800-0200135 France: +33 800 901 793
Europe Germany: 800 1890272 Other Countries: +31 13 5835404
APAC Shanghai: + 86 21 2412 1618/19 Sydney: +61 2 9751 8500
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>