EXTREMEMIST PCS 3 In 1 Portable Misting Fan User Manual

: June 12, 2024
: EXTREMEMIST

Table of Contents

EXTREMEMIST PCS 3 In 1 Portable Misting Fan
Product Information
Product Usage Instructions
Your Kit Includes
Fan Quick Start Guide
Connect PCS Pump to Fan for Misting
Tips & Troubleshooting
Wireless Remote Guide
Battery Pack Guide
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EXTREMEMIST PCS 3 In 1 Portable Misting Fan

EXTREMEMIST-PCS-3-In-1-Portable-Misting-Fan-product

Product Information

The 3-n-1 Portable Misting Fan is a versatile and portable cooling solution that can be used anywhere. It comes with a solar panel, PCS pump, and 16ft mist line attachment. The ExtremeMist PCS pump can be connected to any water vessel/container for hours of cooling comfort. The 12-speed wireless fan is outfitted with 3 mist nozzles and an adjustable tilting metal cage for 180 degrees of flexible airflow. The kit includes a pre-assembled mist ring, feed line with water filter, 20W solar panel, portable/rechargeable fan, hose clips, rubber ties, USB charger for PCS pump, A/C wall plug for fan, spare .020mm mist nozzle, 16ft line mist attachment, pump platform with straps, and PCS pump with wireless remote control.

Product Usage Instructions

Fully charge the fan with the included A/C adapter or charge it directly from the solar panel.
Press the on/off button on the power block on the back of the fan to turn it on. You can also use the USB output to charge other devices.
Check the battery indicator for battery strength.
Select one of the 12 speeds from the digital display.
Adjust the cage tilt for optimum airflow.
For use with the solar panel, be sure to have the whole panel in direct sunlight.
To connect the PCS pump to the fan for misting, charge the PCS battery with its wall charger or by using the solar panel by connecting the USB charger from the fan to the pump.
Place the PCS pump directly on the fan platform and use straps to secure it. If the blue string lanyard is attached to the pump, route the lanyard under the pump to avoid being sucked into the fan cage.
Insert the feed line from the water vessel into the left port of the white quick disconnect finger on the pump, and push it in until fully seated.
Insert the fan’s mist nozzle hose into the right side quick disconnect finger until fully seated.
Insert the brass filter to the end of the feed line. Insert it into any size of the water container. May require cleaning periodically.
Place the water feed line into the desired container with potable clean water.
Press the on button (square icon) on the wireless remote control.
On start-up, the remote defaults the pump to speed 4 out of 8. Use up or down arrows to adjust to the desired output.
Press the on/off button from the back of the fan’s power block to your desired speed.
Adjust the cage tilt for optimum airflow.
Position the mist fan depending on the wind direction.
Note that the PCS pump is not integrated with the fan, as it can be used with other ExtremeMist products. Fan and PCS pumps operate, charge and turn on/off independently of each other.

Water Usage with 3 Nozzles

Speed Level	Low Speeds	Medium Speeds	High Speeds
SPEED LEVEL	LOW SPEEDS	MEDIUM SPEEDS	HIGH SPEEDS

3-n-1 Portable Misting Fan w/ Solar Panel, PCS Pump & 16ft Mist Line attachment

User Manual
Congratulations on the purchase of your new Portable Misting Fan! Use it anywhere. No electricity, No water spigot? No problem! Use the fan as a standalone or turn on the pump for a refreshing, cooling mist. Connect the ExtremeMist PCS pump to any water vessel/container for hours of cooling comfort. Completely portable, 12 speed wireless fan is outfitted with 3 mist nozzles. Cool large areas with its adjustable tilting metal cage, for 180 degrees of flexible airflow.

Your Kit Includes

$EXTREMEMIST-PCS-3-In-1-Portable-Misting-Fan-fig- $1$$

A. Pre-Assembled Mist Ring (3 Nozzles)
B. Feed Line w/ Water Filter
C. 20 Watt Solar Panel
D. 14” Portable/Rechargeable Fan
E. Hose Clips (12)
F. 10” Rubber Ties (6)
G. USB Charger for PCS Pump
H. A/C wall plug for Fan
I. Spare .020mm Mist Nozzle
J. 16ft. Line Mist attachment
K. Pump Platorm w/ Straps
L. PCS Pump w/ Wireless Remote Control

Fan Quick Start Guide

Fully charge Fan (D) with included A/C Adapter (H) or charge directly from the Solar Panel (C)
Press on/off button from the power block on back of fan. (Can use USB output to charge other devices)
Check battery indicator for battery strength.
Select 1 of 12 speeds from the digital display.
Adjust cage tilt for optimum air flow.
For use with solar panel (C) be sure to have the whole panel in direct sunlight

Fan Battery Life Between Charges w/o Solar Panel

FAN SPEED	APPROX. BATTERY DURATION
LOW SPEEDS	13 – 24 hrs
MEDIUM SPEEDS	7 – 13 hrs
HIGH SPEEDS	5 – 7.5 hrs

$EXTREMEMIST-PCS-3-In-1-Portable-Misting-Fan-fig- $2$$

Separate straps to remove pump from base (See connection guide for Mist Line attachment on back of the package)
Disconnect Hose from PCS Pump by depressing white rings on quick disconnect fitings while pulling out hose.

Connect PCS Pump to Fan for Misting

Charge PCS battery with its wall charger or by solar panel by connecting USB charger from fan to pump.

Place PCS Pump directly on the Fan Platform (J). Use straps to secure.
- If the blue string lanyard is attached to pump, route the lanyard under the pump to avoid being sucked into the fan cage
Insert Feed Line (B) from the water vessel into the left port of the white Quick Disconnect fitting on the Pump, and push it in until fully seated.
Insert the Fans mist nozzle hose (A) into the right side Quick Disconnect fitting until fully seated.
Insert Brass Filter to end of 4 ft. Feed Line (B). Insert into any size of water container (Depress plastic ring on Water Filter and pull out hose to remove filter) *May Require cleaning periodically
Place the water Feed Line into the desired container with potable clean water.
Remove the transparent battery blocker from pump before first use.
Press on button (square icon) on the wireless remote control.
On start-up, the remote defaults the pump to speed 4 out of 8. Use up or down arrows to adjust to the desired output.
Press on/off button from the back of the fan’s power block to the desired speed.
Adjust cage tilt for optimum airflow.
Position Mist Fan depending on wind direction.

NOTE:
PCS Pump is not integrated with Fan, as it can be used with other ExtremeMist products. Fan & PCS Pump operates charge, and turns on/off independently of each other.

Water Usage w/3 Nozzles

SPEED LEVEL	APPROX. TIME PER GALLON
LOW SPEEDS	114 mins. – 180 mins.
MEDIUM SPEEDS	75 mins – 108 mins.
HIGH SPEEDS	55 mins. – 75 mins.

Tips & Troubleshooting

Keep water source as close as possible to PCS Pump.
Consider the direction of the wind when setting up. Adjust as needed.
Make sure all hoses are fully seated otherwise, they may leak. Check all connections when first turned on. If leak persists, trim leaking hose and re-seat.
Upon first use, the system may take a few moments to prime. Open purge valve to allow water to flow freely, close valve to allow water to fill hoses and begin misting.
After ensuring the input line is fully seated, and Pump doesn’t draw water, remove hose from first mist nozzle connector, turn Pump to high and draw (like a straw) on released hose to help prime Pump.
If PCS loses its prime (vapor lock), twist open the purge valve to allow water to flow freely. Then close.
Never pull hoses out of quick-disconnect fittings w/o first depressing the gray or white quick-disconnect rings to release.
Hoses can be trimmed to fit your configuration.
IF MIST NOZZLE CLOGS disconnect the nozzle from the fitting, with the nozzle head facing down on a solid surface, try tapping to clear any mineral crystals from nozzle head. If tapping is unsuccessful, unscrew nozzle head portion of the nozzle (always unscrew with the nozzle upright,use caution not to lose small parts inside nozzle body). Gently probe hole in white ceramic disk from inside portion of cap with fine needle. Nozzles can clog from minerals in tap water. If you can’t clear the nozzle, soak per instructions of CLR or similar product to dissolve mineral crystals from nozzle. If still not spraying, unscrew filter section of nozzle, blow through the unscrewed bottom portion to clear micro filter. Filter may be removed for thorough cleaning. NOTE: See online Troubleshooting videos for clearing out the nozzles.

Wireless Remote Guide

Maximum line of sight is approx. 30 feet.
Square icon is ON button, Lock icon is OFF button.
Pump defaults to speed 4 when first turned on.
UP and DOWN arrows control pump speed.
Sliding cover protects buttons when not in use.
Clip remote to a convenient location for easy access.

Battery Pack Guide

May remove the battery pack from pump system before charging.
- Slide latch-up, lift battery, and firmly pull.
- To reinsert the battery, slide latch-up, align two tabs, insert the bottom of the battery into its cradle, and push it into place. Make sure the latch is slid closed.
Press the button on the front of the battery pack, up to 4 lights will illuminate indicating charge.
Micro USB Port will charge the battery pack with PCS Charger. Can also be charged with solar panels by plugging the USB end into fan and Micro USB into the battery pack.
Output USB Port will charge other devices.
Battery lasts 5-12+ hours depending on the speed of mist and output charging.
For fast charge, plug the A/C adapter into the wall outlet & connect it to Micro USB Port on the battery.
To charge the battery from other USB devices detach the cord from the A/C adapter & connect to Micro USB Port on the battery.

For cleaning instructions visit ExtremeMist.com/Care-and- Cleaning.

PCS Information