EXTREMEMIST PCS Portable Misting System User Manual

EXTREMEMIST PCS Portable Misting System

Product Information

The Portable Misting System (Quad Kit) is a compact and portable device that can be used to stay cool anywhere, anytime. The kit includes a blue PCS pump with a battery, a purge valve, an 8-speed remote control, 10 rubberized ties, a 16ft. hose with four mist nozzles, a blue pump cover, a USB charger, leather clips, a 4ft. feed-line, a brass hose filter, and a 5’6-extra hose (trim to fit). The device is equipped with Blue Pump Technology and a powerful pump system that can be controlled wirelessly via remote control.

Product Usage Instructions:

1. To charge the PCS battery, insert the USB charger into the charger port and charge it in or out of water. Turn the PCS pump off and place it in its cradle. Press the power icon button on the battery pack for charging to the highest setting to indicate full charge (four lights).
2. Reinsert the charged battery into its cradle and insert the PCS pump into the blue pump cover.
3. Remove any remaining water from the hose and remove the plastic ring on the water filter to pull out the hoses. Remove the hose to remove the filter.
4. Insert one end of the feed-line into the white input port on the blue pump (down arrow), closest to the nylon lanyard. Fully seat the hose.
5. Insert one end of the mist hose into the white output port on the pump (up arrow). Be sure to fully seat the hose.
6. Attach the PCS pump to a preferred structure using a lanyard or dual straps on the back of the blue pump cover. Turn the unit on high, hold it upside down, and lightly shake to remove excess water.
7. Clip the nozzle hose to a preferred structure with leather clips and/or 10 rubberized ties.
8. Turn on the blue pump via the remote control (square icon) and adjust the mist to the desired speed. Rotate the knob on the purge valve to release any trapped air if mist hasn’t started within 15 seconds.

To learn more about care and cleaning, visit www.extrememist.com/care-and- cleaning. For troubleshooting, follow these tips:

• If there is a leak, re-seat the hose. If the leak persists, trim the leaking hose and re-seat.
• If the water does not flow freely, close the valve to allow water to fill hoses and begin misting.
• If the pump is not priming, remove the nozzle connector, turn the pump to high and draw (like a straw) on the released hose to help prime the pump.
• To remove the nozzle head, unscrew it with the nozzle upright. Use caution not to lose small parts in the body of the nozzle. To clean the nozzle head, remove it and tap it on a hard surface to dislodge hard water crystals. From inside of the nozzle head, insert a fine sewing needle to clear the hole or soak it in mineral remover.

Your Kit Includes

• A.) Blue PCS Pump w/ Battery
• B.) 8 speed Remote Control
• C.) 16ft. Hose w/ 4 Mist Nozzles
• D.) Purge Valve
• E.) 10” Rubberized Ties (6) F.) Blue Pump Cover
• G.) USB Charger
• H.) Leather Clips (12)
• I.) 4 ft. Feed-Line
• J.) Brass Hose Filter
• K .) 5’6”-Extra Hose (Trim to Fit)

SET UP INSTRUCTIONS

1. Remove PCS pump cover (F) and take out transparent battery blocker tab. With USB charger (G), charge PCS battery in or out of its cradle (A). Press power icon button on battery pack for charge indicator. 1-4 lights indicate power level. 4 lights means full charge.

2. Reinsert charged battery into its cradle. Insert PCS pump (A) into PCS pump cover (F).

3. Insert Brass Hose Filter (J) to end of 4’ Feed-Line (I). Insert into any size water container. Depress plastic ring on water filter and pull out
   hose to remove filter.

4. Insert other end of Feed -Line (I) into white input port on Blue Pump, (down arrow) closest to nylon lanyard. Fully seat hose.

5. Insert end of mist hose (C) into white output port on Pump (up arrow). Be sure to fully seat hose.

6. Attach PCS Pump to preferred structure using lanyard or dual straps on back of Blue Pump Cover (F).

7. Clip nozzle hose to preferred structure with Leather Clips (H) and/or 10” Rubberized Ties (E).

8. Turn on Blue Pump via Remote Control (B) (Square icon) and adjust mist to desired speed. Rotate knob on Purge Valve (D) to release any trapped air if mist hasn’t started within 15 sec.

STORAGE

• Remove Feed-Line from water, turn PCS Pump to highest se?ng to remove any remaining water from hose.
• Depress quick disconnect ring to remove hoses from Pump & fi?ngs, turn unit on high, hold upside down, and lightly shake to remove excess water.
• Store in a dry place above 32°F.

Blue Pump Technology

Wireless Remote Guide

• Maximum distance is up to 30 feet.
• Square icon is ON button; lock icon is OFF button.
• Pump defaults to speed 5.
• UP and DOWN arrows control speed of mist.
• Sliding cover protects buttons when not in use.
• Clip remote to a convenient locaton for easy access.

Battery Pack Guide

• Remove transparent battery blocker tab before use.
• Battery Pack can be removed from pump system before charging.
  • Slide latch up, lit battery, and firmly pull.
  • To reinsert battery, slide latch up, align two tabs on bothom of battery, insert bothom of battery into its cradle, push into place. Make sure latch is slid closed.
• Press button on front of battery pack, up to 4 lights will illuminate indicating charge.
• Input micro USB will charge battery pack with PCS Charger.
• Output USB will charge other devices.
• Battery lasts 5-12+ hours depending on speed of mist and output charging.
• For fast charge, plug A/C adapter to wall outlet & connect to Micro USB on battery. Dead to full in approximately 3 hrs.
• To charge battery from other USB devices detach cord from A/C adapter & connect to Micro USB port on battery. Charge times will vary.

Water Usage w/ 4 Nozzles

SPEED LEVEL/APPROX. TIME PER GALLON

• LOW SPEEDS: 1.5 – 2.5 hours|
• MEDIUM SPEEDS: 1 – 1.5 hours
• HIGH SPEEDS: 45 – 60 mins.

Powerful Pump System

Battery Life Between Charges

PUMP SPEED RANGE./APPROX. BATTERY DURATION

• LOW SPEEDS: 9 – 12 hrs.
• MEDIUM SPEEDS: 7 – 9 hrs.
• HIGH SPEEDS: 5 – 7 hrs.

Tips & Troubleshooting

• Keep water source as close as possible to PCS Pump.
• Consider the direction of the wind when settng up. Adjust as needed.
• Make sure all hoses are fully seated otherwise they may leak. Check all connections when first turned on. If leak persists, trim leaking hose and re-seat.
• Upon first use, system may take a few moments to prime. Open purge valve to allow water to flow freely, close valve to allow water to fill hoses and begin mis?ng.
• After ensuring input line is fully seated, if Pump doesn’t draw water, remove hose from first mist nozzle connector, turn Pump to high and draw (like a straw) on released hose to help prime Pump.
•  If Blue Pump loses its prime (vapor lock) twist open Purge Valve to allow water to flow freely, close.
• Never pull hoses out of quick-disconnect fittngs without first depressing the gray or white quick-disconnect rings to release.
• Hoses can be trimmed to fit your configuration.
• If nozzle clogs; disconnect nozzle from fittng, unscrew top section of nozzle (always unscrew with nozzle up-right). Use caution not to lose small parts in body of nozzle. Remove Nozzle and tap on hard surface to dislodge hard water crystals. From inside of Nozzle Head, insert fine sewing needle to clear hole, or soak in mineral remover solution such as CLR or white vinegar. If Nozzle Head is clear and mist still won’t emit, unscrew bothom portion of nozzle (connected to stem) blow though fittng to clear Micro Filter.

NOTE: Nozzles can clog from min erals in tap water. You can u se distilled water for clog free use. See “PCS Installation” video for clearing out the nozzles.

Scan for Troubleshooting videos

For cleaning instructions visit ExtremeMist.com/care-and-cleaning

PCS Information

• Quad Kit / PCS Pump is NOT waterproof.
• Fully charge battery every (6) mos. or battery life may degrade.
• Pump lasts up to 1500 usage hours.
• Warranty: 1 year from purchase date.

To Learn More: www.ExtremeMist.com
Contact: info@ExtremeMist.com or 602-368-9625 ExtremeMist® is a trademark of ExtremeMist® PCS LLC. Assembled in USA made with parts from China and USA.

References

• Care and Cleaning – ExtremeMIST
• ExtremeMist Portable Misting Systems – ExtremeMIST
• Care and Cleaning – ExtremeMist PCS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>