GE Holiday 22001 Monroe Spruce Pre-Lit Christmas Trees Instruction Manual

June 12, 2024
GE Holiday

GE Holiday 22001 Monroe Spruce Pre-Lit Christmas Trees
logo

GE Holiday 22001 Monroe Spruce Pre-Lit Christmas Trees

GE Holiday 22001 Monroe Spruce Pre-Lit Christmas Trees
product

Product Information:

  • The pre-lit Christmas tree is manufactured by Nicolas Holiday Ltd.
  • The product is for indoor use only and operates on 120V.
  • The package includes sections A, B, and Top, as well as a Tree Stand.
  • No additional Christmas lighting or ornamentation that is powered by a light bulb socket should be used with the product.
  • The product comes with a limited warranty from the manufacturer.

Product Usage Instructions:

  1. Carefully unpack the carton and remove the bubble wrap. Inspect the sections of the tree to ensure all required components are present.
  2. Insert section B properly into the top of section A to assemble the middle section. Adjust branch tips as needed for a fuller look.
  3. Insert section A into the tree stand and tighten the thumbscrew. Then, insert the plug into an electrical wall outlet.
  4. To electrically connect the sections, fully insert the plug from the extension cord attached to the pole of the middle section into the extension cord outlet attached to the pole near the top of the bottom section.
  5. Repeat step 4 for shaping the tree.
  6. To assemble the tree top, properly insert the Top section int the top of section B. Adjust branch tips as needed for a fuller look.
  7. To illuminate the top, fully insert the plug from the top section into either the end connector or the extension cord outlet on or near the top layer of branches of previously assembled pole.
  8. If the tree does not illuminate, make sure the wall switch is turned on. If one section of the tree does not illuminate, check that section for loose or missing bulbs, all factory connections are properly made, or that you properly made all the electrical connections between each tree section. Also, check the fused plug for a missing or burned out (open) fuse.
  9. When storing the tree, remove the main extension cord plug from the wall outlet. Starting at the top, disconnect the Top from section B and then disconnect section B from section A. Gently fold the tips in branches and fold the branches up toward the center to avoid damage to the lights. Remove section A from the tree stand and close the tree stand to place it into the carton. Refer to the drawing on how to repack your tree.
  10. Store the carton neatly in a cool, dry location protected from sunlight to prolong the tree life and to better keep the light sets in working order. Do not place any additional Christmas lighting or ornamentation that is powered by a light bulb socket.

Assembly Instructions

Nicolas Holiday Ltd. thanks you for purchasing this pre-lit Christmas tree. Should you have any problems with your tree, visit us at www.geholidaylighting.com for more information. You can call our toll free number at 1-877-398-7337.
Check our website for latest service hours and assembly instruction videos
NOTE: No tools required

  1. Carefully unpack the carton. Remove bubble wrap and inspect the sections of your tree. The carton should include sections “A”, “B” and “Top”, as well as a Tree Stand. GE Holiday 22001 Monroe Spruce Pre-Lit Christmas Trees 2

  2. The tree stand should be open and set at 90° angle.GE Holiday 22001 Monroe Spruce Pre-Lit Christmas Trees 3

  3. Insert Section A into tree stand, tighten the thumbscrew. Then insert the plug into an electrical wall outlet.GE Holiday 22001 Monroe Spruce Pre-Lit Christmas Trees 4

  4. Untie RED twist-tie to release branch panels. All branches should fall into place with a gentle pull on the outer layer of branches.
    Start at the inner and stagger the tips. Move each tip up to 40°. Make tips 2 & 3 to horizontial, tip 4 to vertical and tips 5 and 6 up to 45°. GE Holiday
22001 Monroe Spruce Pre-Lit Christmas Trees 5

  5. To assemble the section “B”, properly insert section “B” into the top of section “A”.
    Adjust branch tips, as needed, for a fuller look.
    GE Holiday 22001 Monroe Spruce Pre-Lit Christmas Trees
6To electrically connect the sections, fully insert the plug from the extension cord attached to the pole of the middle section into the extension cord outlet attached to the pole near the top of the bottom section.

  6. Repeat “Step 4” for shaping.

  7. To assemble the tree top, properly insert the “TOP” section into the top of section “B”. (See Fig. D) Adjust branch tips, as needed, for a fuller look.
    GE Holiday 22001 Monroe Spruce Pre-Lit Christmas Trees
8To illuminate the top, fully insert the plug from the top section into either the end connector or the extension cord outlet on or near the top layer of branches of previously assembled pole.

Troubleshooting Tips

If the tree does not illuminate, make certain the wall switch is turned on.
If one section of your tree does not illuminate, check that section for loose or missing bulbs, all factory connections are properly made or that you properly made all the electrical connections between each tree section, Also, check the fused plug for a missing or burned out (open) fuse.
DISCLAIMER : DO NOT USE OR INSTALL ANY ADDITIONAL CHRISTMAS LIGHTING OR ORNAMENTATION THAT IS POWERED BY A LIGHT BULB SOCKET. DOING THIS MAY RESULT IN DAMAGE TO YOUR CHRISTMAS TREE OR CAUSE PERSONAL INJURY. DOING THIS, WILL RESULT IN A VOID OF THE LIMITED WARRANTY OF THIS PRODUCT.
Disconnect the decorative item from the power source before performing any maintenance or cleaning.
For indoor use only 120V
THIS IS NOT A TOY, FOR DECORATIVE USE ONLY.

Tree Storage

  1. Remove the tree’s main extension cord plug from the wall outlet.

  2. Starting at the top, disconnect the “TOP” from section “B” and then disconnect section “B” from section “A”.
    GE Holiday 22001 Monroe Spruce Pre-Lit Christmas Trees
9 Note: Gently fold the tips in branches  and fold the branches up toward the center.  Care should be taken to avoid damage to the lights.

  3. Remove section “A” from the tree stand and close tree stand to place into the carton.

  4. Refer to the drawing on how to repack your tree. GE Holiday 22001 Monroe Spruce Pre-Lit Christmas Trees 11

IMPORTANT: Store your carton neatly in a cool, dry location protected from sunlight to prolong the tree life and to better keep the light sets in working order. Do not place a heavy load on the carton to avoid damage to or crushing the carton and tree inside.GE Holiday 22001 Monroe Spruce Pre-Lit Christmas
Trees 12GE is a trademark of General Electric Company
and is under license by Nicolas Holiday Ltd.
©2022 Nicolas Holiday Ltd.
9 F., No. 37, Guangfu North Rd., Taipei, Taiwan 10560 All rights reserved.
Printed in China 22001LO

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

GE Holiday User Manuals

Related Manuals