KICHLER 49927OZ Capanna 1-Light Outdoor Lamp Post Light Instruction Manual
- June 12, 2024
- KICHLER
Table of Contents
49927OZ Capanna 1-Light Outdoor Lamp Post Light
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
KICHLER
CAUTION – RISK OF SHOCK –
Disconnect Power at the main circuit breaker panel or main fuse box before
starting and during the installation.
- Slip fixture over post and mark position of mounting holes in post.
- Remove fixture from post.
- Drill 3/16” dia holes in post at positions marked .
- If fixture is provided with ground wire, connect fixture ground wire to outlet box ground wire with wire connector. (Not pro- vided). Never connect ground wire to black or white power supply wires.
- Grounding instructions: (See Illus. A or B).
A) On fixtures where mounting strap is provided with a hole and two raised dimples. Wrap ground wire from outlet box around green ground screw, and thread into hole.
B) On fixtures where a cupped washer is provided. Attach ground wire from outlet box under cupped washer and green ground screw, and thread into mounting strap.
If fixture is provided with ground wire. Connect fixture ground wire to outlet box ground wire with wire connector. (Not pro- vided.) After following the above steps. Never connect ground wire to black or white power supply wires.
-
Make wire connections (connectors not provided.) Reference chart below for correct connections and wire accordingly.
-
Slip fixture over post and secure in place using provided screws[1]. Screws should slip into holes drilled in post.
-
Insert recommended bulb(s) (Not supplied).
-
Carefully lower the fixture roof[2] over the bracket. Align the holes inside the fixture roof with the holes on the bracket. 10) From under the fixture roof, thread a screw[3] into each hole of the bracket and into the threads in the roof. Tighten screws to secure in place.
Date Issued: 09/13/17 IS-49927-US
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>