logitech Logi Dock Focus Room Kit User Guide

October 30, 2023
Logitech

logitech Logi Dock Focus Room Kit User Guide
logitech Logi Dock Focus Room Kit

WHAT’S IN THE BOX

WHAT’S IN THE BOX

  1. Logi Dock with mounting bracket
  2. Brio webcam with universal mounting clip
  3. Attachable privacy shutter
  4. USB-C cable tidy kit
  5. USB-C-to-Ethernet adapter
  6. USB-C to USB-C cable
  7. AC power cord
  8. Power supply
  9. USB-A to USB-C cable
  10. Mounting hardware – screws x2, VHB tape, hex key
  11. Documentation

FEATURES

LOGI DOCK
LOGI DOCK

  1. One touch to join
  2. Beamforming mic
  3. Status LED
  4. Ambient light
  5. Kensington security slot
  6. USB-C

BRIO WEBCAM
BRIO WEBCAM

  1. Status LED
  2. IR sensor
  3. IR LED

CONNECTION OVERVIEW

CONNECTION OVERVIEW

INSTALLATION – BRIO WEBCAM

  1. Place your webcam on a monitor at a position or angle you desire.

  2. Adjust the webcam to make sure the foot on the universal mounting clip is flush with the back of your monitor.

  3. Manually adjust the webcam up/down to the best position to frame yourself.

  4. Attach the privacy shutter over the lens on the webcam.
    INSTALLATION - BRIO WEBCAM 

INSTALLATION – USB-C CABLE TIDY KIT

  1. Clean the surface. Peel off the tape.
    INSTALLATION - USB-C CABLE TIDY KIT

  2. Press the loop to the table with force for a few seconds.
    INSTALLATION - USB-C CABLE TIDY KIT

INSTALLATION – MOUNTING BRACKET OPTIONS

Option 1 Mount Logi Dock to the table using included 2 screws.
INSTALLATION - MOUNTING BRACKET OPTIONS

Option 2 Mount Logi Dock to the table with VHB tape by applying the tape to the bottom of the bracket.
INSTALLATION - MOUNTING BRACKET OPTIONS

Option 3 Secure Logi Dock to the table with Kensington Lock.*
INSTALLATION - MOUNTING BRACKET OPTIONS

*Lock not included

  INSTALLATION – WIRE MANAGEMENT

  1. Remove clamp with the hex key provided. Then lift off the top and middle comb.
      INSTALLATION - WIRE MANAGEMENT 

  2. Install all cables either into top or bottom comb based on connector placement.
      INSTALLATION - WIRE MANAGEMENT 

  3. Replace clamp. Tighten screws to secure cables.
      INSTALLATION - WIRE MANAGEMENT 

CONTROLS

CONTROLS
CONTROLS

© 2023 Logitech. Logitech, Logi and the Logitech logo are trademarks or registered trademarks of Logitech Europe S.A. and/or its affiliates in the U.S. and other countries. USB-C and all other 3rd party trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals