CRYSTORAMA SOL-9325-EB Solaris Three Light Outdoor Chandelier Instruction Manual

CRYSTORAMA SOL-9325-EB Solaris Three Light Outdoor Chandelier

Product Information

The product is a model #SOL-9325-EB chandelier from Crystorama.com. The product consists of a canopy, collar ring, collar loop, quick links, hanging chain, rod, swivel, center stem, final, glass shades, and candle sleeves. The product requires 3 candelabra base bulbs with a recommended wattage of 40 watts and a maximum wattage of 60 watts. It is recommended to use LED bulbs for extended use. The fixture is wet-rated.

Product Usage Instructions

1. Do a complete inventory of all parts and components before starting installation.
2. Install 3 candelabra base bulbs (not included).
3. Install the glass shades.
4. Install the mounting plate onto the outlet box and secure it with the outlet box screws.
5. Take the end of the rod with a hook and attach it to the top of the fixture frame. Open a quick link and attach it to the other end of the rod (the end with a closed loop).
6. Thread the collar ring into the canopy.
7. Open the other quick link and attach it to the collar loop.
8. Connect fixture wires to the outlet box.
9. Raise the canopy onto the collar loop and secure it with the collar ring.
10. Attach crystal ball A to the bottom of the fixture.
11. After safely attaching the fixture to the outlet box, proceed to connect the power.

**MODEL #SOL-9325-EB

**

WARNING

• Electrical Danger
• Turn Power Off
• All electrical components must be installed by a licensed electrician In accordance with the National Electric Code and the appropriate local electrical codes.
• You will need 3 -Candelabra Base Bulb 40 Watts Recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE THIS FIXTURE IS WET RATED

HOW TO INSTALL

1. Do a complete inventory of all parts and components before you start the installation.
2. Install bulbs (not included).
3. Install glass shade.
4. Install the mounting plate onto the outlet box and secure it with the outlet box screws.
5. Take the end of the rod with a hook and attach it to the top of the fixture frame. Open a quick link and attach it to the other end of the rod (the end with a closed loop).
6. Thread the collar ring into the canopy.
7. Open the other quick link and attach it to the collar loop.
8. Connect fixture wires into the outlet box.
9. Raise the canopy onto the collar loop and secure it with the collar ring.
10. Attach the crystal ball “A” on the bottom of the fixture.
11. After safely attaching the fixture to the outlet box, proceed to connect the power.

WARNING: This product can expose you to Lead, which is known ID the SIBie of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Wamings.ca.gov.

PART NUMBER

• A.(1) – Mounting Hardware
• B.(1) – Canopy(W5.9”, H0.6”) #XRE9325EBCAN5.9IN
• C.(1) – Collar Ring
• D.(1) – Collar Loop #X9325EBLOOP
• E.(2) – Quick Link
• F.(1) – Hanging Chain(72″,4mm) #XRE9325EBCHA4MM
• G.(1) – Rod(8″,9.3mm) #XRE9325EBROD8IN
• H.(1) – Swivel
• I.(1) – Center Stem(6.61″,9.3mm) #XRE9325EBSTEM6.61IN
• J.(1) – Final #XRE9325EBFIN
• K.(3) – Glass Shade(W2.48″,L5.67″) #XRE9325SHA5.67IN
• L.(3) – Candle Sleeve(W0.87″,H1.97″) #XRE9325EBCDL1.97IN

References

• Crystorama Lighting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>