CRYSTORAMA ROY-800-BK Royston 3 Light Ceiling Mount Instruction Manual
- October 30, 2023
- CRYSTORAMA
Table of Contents
CRYSTORAMA ROY-800-BK Royston 3 Light Ceiling Mount
Product Information
The Crystorama Model #ROY-800-BK is a dry rated lighting fixture that requires 3 medium base bulbs with a recommended wattage of 40watts and a maximum wattage of 60 watts. LED bulbs can be used for extended use. The fixture comes with mounting hardware, wire connectors, safety cable, ball nuts, threaded nipples, metal washer, plastic washer, hex nut, mounting nipple, and finial. The fixture must be installed by a licensed electrician in accordance with the National Electric Code and appropriate local electrical codes. The product can expose you to lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm.
Product Usage Instructions
- Place the fixture parts on a soft cloth-covered platform before installation of the fixture.
- Install the bulb (not included) into the socket. Screw the threaded pipe onto the coupling and secure it with a hex nut. Place the frame over the bottom of the threaded pipe. Place the metal washer, plastic washer, glass diffuser, hex nut, and bottom cap in that order on the bottom of the frame. Secure with finial.
- Hang the safety cable onto the mounting bar and make the wire connection.
- Install the mounting bar onto the outlet box and raise the fixture up to the ceiling. After the wire connection is complete, secure the fixture onto the mounting bar using the mounting nipple.
It is important to follow these instructions carefully to ensure the safe and proper installation of the lighting fixture. If you haveany questions or concerns about the installation, please consult a licensed electrician.
DIMENSION
WARNING:
- Electrical Danger
- Turn Power Off
- All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes
- You will need 3- Medium Base Bulb 40 Watts recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE The fixture is Dry rated
HOW TO INSTALL
Place the fixture parts on a soft cloth-covered platform before installation of fixture.
- Install the bulb(not included) into the socket. Screw the threaded pipe onto the coupling and secure it with a hex nut. Place the frame over the bottom of the threaded pipe. Place the metal washer,plastic washer, glass diffuser,hex nut and bottom cap in that order on the bottom of the frame. Secure with finial.
- Hang the safety cable onto the mounting bar and make the wire connection.
- Install the mounting bar onto the outlet box and raise the fixture up to the ceiling. After the wire connection is complete, secure the fixture onto the mounting bar using the mounting nipple.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.p65warnings.ca.gov.
ASSEMBLY INSTRUCTION
MODEL #ROY-800-BK
Part Numbers
- A. (1)- Mounting hardware
- Wire connector x2.
- Mounting bar x1.
- Mounting screw x4.
- Washer x1.
- Hex nut x1.
- Mounting Nipple x1.
- B. (1)- Safety cable
C. (2)- Ball nut -XSN800BKBANUT
D. (2)- Threaded nipple; H8 7/8″
E. (1)- Metal washer
F. (1)- Plastic washer
G. (1)- Glass diffuser; Ø17 3/8″ – XSN800DIF17.375IN
H. (2)- Hex nut
I. (1)- Bottom cap; Ø2″
J. (1)- Finial-XSN800BKFIN
K. (1)- Frame; Ø18″
LIGHTING THE WAY FOR SIXTY YEARS