moonDROP Space Travel True Wireless Earbuds User Manual
- May 21, 2024
- MOONDROP
Table of Contents
Space Travel True Wireless Earbuds
Product Information
This device is compliant with part 15 of the FCC Rules and is designed to operate without causing harmful interference. Any changes or modifications to this device that are not approved by the manufacturer may void your authority to operate this equipment. The device is designed to comply with FCC radiation exposure limits for an uncontrolled environment and should be installed and operated with a minimum distance of 0cm between the radiator and your body.
Product Usage Instructions
- When using this device, please ensure that it is operated in compliance with part 15 of the FCC Rules. The device should not cause any harmful interference and must accept any interference received, including interference that may cause undesired operation. Additionally, it is important to maintain a minimum distance of 0cm between the radiator and your body to comply with FCC radiation exposure limits for an uncontrolled environment.
- Please note that any changes or modifications to the device that are not approved by the manufacturer may void your authority to operate this equipment.
- If you have any questions or concerns about using this device, please refer to the user manual or contact the manufacturer for assistance.
Package list
(The pictures are for reference only, please to the actual products.
Introduction
Manual
Turn on Automatically turn on after taking the earbuds out, coming with
Power On prompt
Turn off
- Back to the case: it will turn off after putting the earbuds back into the charging case
- Overtime turn-off: It will turn off if there is no paired device within 3 minutes
- Low-battery turn-off: It will turn off if the battery is low You’ll hear the prompt of Power Off
Manual
Restore factory setting Be sure the earbuds is unconnected pa and is searching
Bluetooth, simultaneously long press the right/left earbuds for 8s to clean
paired information and restore the factory setting.
Manual
Charging
- Put the earbuds in the charging case
- The earbuds state of charging
- When charging: The white indicator is always on
- Fully charging: LED indicator goes out The case state of charging
- When charging: The orange indicator is always on
- Fully charging: LED indicator goes out
- Tips: The charging case state is given priority when charging both earbuds anote case
Connection
Bluetooth pairing
- Entering the Bluetooth interface to find Moondrop Space
- Travel, click Enter to pair. there is warning of “Du Du Du” under pairing mode You’ll hear the prompt of Connected
Disconnection
- 0ver-distance disconnection: The earbuds will be automatically disconnected if beyond the effective working distance, you’ll hear the prompt of Disconnect
- Manually disconnection: Under the connected state (non- working state), simultaneously long-press the Touch of
Connection
Right and Left for 3s, disconnect the current device. Or manually turn off the
Bluetooth device to disconnect.
The earbuds will enter into the pairing mode after disconnected, Moondrop
Space Travel allows pairing with other devices.
Reconnection
- 0ver-distance disconnection automatic reconnection: The earbuds will be automatically reconnected when it enters the effective working distance within 3 minutes, you’ll hear the prompt of Connected
- Reconnection : the earbuds will automatically reconnect the last paired device when taken it out from the charging case
- Please put the earbuds back in the charging port if there is one earbud quiet and disconnecting, and try to reconnect
Function
Operation
Voice Assistant
Click the left/right earbud 3 times to start, and click to exit
Part of Android smartphones require opening the “enable voice assistant”
Music
- Play/pause: click the left/right earbud
- Previous/NEXT: double-click the left earbud for the previous song, and the right earbud for the next song.
Call
- Answer: Click the left/right earbud
- Decline: Long press left/right earbud for 1.5s
- Hang up: Click the left/right earbud
- Third-party call: Click the left/right earbud, keep the original call and answer the new call
- Switch the call: Double-click the left/right earbud
Noise-canceling Mode
- In the turn-on state, Long-press Right/left for 1s to switch the mode
- The prompt of noise-canceling is Sh
- The prompt of regular mode is Eh
- The prompt of transparency mode is Heh
- Low-latency Mode
- In the turn-on state, click the right/left earbud for 4 times to switch mode
- The prompt of game: Game Mode Exiting game mode is Music Mode
Product Specifications
Product Model: Space Travel
- Bluetooth Version: 5.3
- Audio Transmission Formats: A2DP/AVRCP/HFP/HSPSBC/AAC
- Charging Plug: Type-C
- Impedance: 32÷10%0@1 kHz
- Bluetooth Range : 10 meters (unobstructed environment)
- Charging input: 5V – 1A
- Charging time of the case: about 1.5 hours
- Earphone Battery Capacity: 3.7V/37 mAh
- Charging Case Battery Capacity: 3.7V/380mAh
- Earphone Playback time: About 4 hours
- With Charging Case Playback time: About 12 hours
Security Instructions
Please read this important security instructions before using the equipment. This information contains general safety information applicable to this device and may include content not applicable to this device. Please follow the warnings and cautions to avoid injury to yourself or others or damage to your equipment.
- Touch the device, power cord, plug or power socket, otherwise it may cause electric shock.
- When unplugging the power cord, do not use too much force, otherwise it may cause electric shock or fire.
- Do not bend or damage the power cord, otherwise it may cause electric leakage or fire.
- Do not operate the device with wet hands while it is charging, otherwise it may cause electric shock.
- Do not directly connect the positive and negative terminals of the charger together, otherwise it may cause a fire or cause serious injury.
- Do not use the device outdoors during a thunderstorm, otherwise it may cause electric shock or equipment failure.
- Use batteries, chargers, accessories and supplies approved by the manufacturer.
- Using universal batteries or chargers may shorten the life of the battery or cause the device to malfunction. They may also cause a fire or cause the battery to explode.
- Only use chargers and data cables specially designed for equipment and approved by MOONDROP. Incompatible chargers and data cables may cause danger or damage the device.
- When customers use accessories or supplies not approved by
- MOONDROP,
- MOONDROP is not responsible for the customers’ safety.
- Do not put the device in the back pocket or hang it on the waist
- Excessive force may damage the device, might cause explode or fire.
- If you hit or fall, you may be injured.
- Do not drop the device or subject it to strong impact
- Otherwise, it may damage the device or battery, cause the device to fail to work normally, or shorten the device life. may also cause overheating, burning or other dangers.
- Handle and dispose of equipment and chargers carefully
- Do not throw battery or device into fire.
- Do not place batteries or devices in or on heating devices (such as microwave ovens, ovens, or radiators). The device may explode if overheated.
- When disposing of used battery or device, please comply with local regulations.
- Do not squeeze or pierce the device.
- Do not subject the device to external high voltage, otherwise it may cause internal short circuit and overheating.
- Protect equipment, batteries and chargers from damage.
- Avoid exposing the device and battery to extremely cold or extremely hot temperatures.
- Extreme temperature can damage the device, reduce the charging capacity of the device, and shorten the service life of the device and battery.
- Do not use the data cable with the skin peeled off or damaged, and the charger with damaged or not working properly.
- Do not store device near or in water heaters, microwave ovens, hot cooking equipment, or high-pressure containers
- The battery may leak.
- The equipment may overheat and cause a fire.
Do not use or store the device in areas where dust or aeolian materials are concentrated Dust or foreign objects may cause device damaged, fire or electric shock. Prevent the charger socket and the smaller end of the charger from contacting conductive materials such as liquid, dust, metal powder, or pencil lead. Do not touch with sharp tools. Charger socket; do not bump the charger socket Conductive materials may short-circuit or corrode the contacts, which may cause explosion or fire.
When using a wireless charger, do not place metal objects, magnets, and
magnetic stripe cards between the device and the wireless charger. The device
may not charge properly or may overheat.
Do not bite or suck the device or battery
- Otherwise, it may damage the equipment or cause an explosion or fire.
- Children or animals can suffocate by swallowing small parts.
- When children use this device, please make sure they use it correctly.
- Do not poke the device or its accessories into your eyes, ears or mouth, otherwise it may cause suffocation or serious injury.
Do not use damaged or leaking batteries. For safe disposal of batteries, please contact the nearest authorized service center. The device and some accessories (sold separately) contain magnets. The American Heart Association and the British Medicines and Health Products Administration also warned that magnets will affect implantable pacemakers, heart rhythm converters, defibrillators, insulin pumps or other electronic medical devices (collectively referred to as “medical devices”) within 15 cm. operating. If you are a user of any of these medical devices, please do not use this device and some accessories (sold separately) before consulting a doctor.
- Failure to comply with safety precautions and regulations can lead to personal injury or property damage
- Do not use the device near other electronic devices
- Most electronic devices use radio frequency signals. Your device may interfere with other electronic devices.
- Equipment with speakers is particularly susceptible to interference.
- Do not use your device in places that may be interfered by radio frequency such as hospitals, airplanes or cars
- If possible, use the device beyond 37cm of the pacemaker to avoid interference with the pacemaker.
- In order to minimize the interference of the device to the pacemaker, please use the device on the side of opposite to the pacemaker.
- If you use medical equipment, please contact the medical equipment manufacturer before using this device to determine whether it will be affected by the radio frequency emitted by this device.
- During air flight, the use of electronic equipment will interfere with the airplane’s electronic navigator. Follow the airline’s regulations and the instructions of the “aircraft crew. If the equipment is allowed, please always use the flight mode.
- The electronic equipment of the car may malfunction due to radio interference from the equipment. For details, please contact the manufacturer.
Do not place the device in a place with dense smoke or fog
- Otherwise, the surface of the device may be damaged or the device may malfunction.
- If you use hearing aids and cochlear implants, please contact the manufacturer for information about radio interference. The radio frequencies emitted by this device may interfere with certain hearing aids and cochlear implants. Before using this equipment, please contact the manufacturer to determine whether the equipment will be affected by the radio frequencies emitted by this equipment.
Do not use the device near radio frequency devices or instruments (such as audio systems or radio antenna towers) Radio frequency may cause device malfunction.
- Turn off the device in a potentially explosive environment
- Always operate in accordance with regulations, instructions and signs in an explosive environment.
- Do not use the equipment in gas stations or near flammable materials, chemical agents and explosive areas.
- •Do not store or carry flammable liquids, gases or explosive
materials in boxes containing device or accessories.
If any part of the device is damaged, smokes, or smells of burning things, please stop using the device immediately. The equipment can not be reused until being repaired by the MOONDROP Service Center.
- Broken glass may hurt your hands and face.
- If the device emits smoke or the smell of burning things, it may cause the battery to explode or burn.
Please observe all safety warnings and regulations regarding the use of equipment while driving. Driving safely is your primary responsibility while driving. If prohibited by law, please do not use the device while driving. For the safety of you and others, please follow the safety warnings and relevant regulations and remember the following tips:
- Place the equipment in an easy-to-access location. No need to look away from the road to get the wireless device.
- In order to avoid danger, pause the call in traffic jams or bad weather conditions (rain, sleet, snow, ice). Rain and sleet, snow, ice and heavy traffic can cause danger.
- Do not record voice memos. Recording a language memo while driving prevents you from focusing on the primary responsibility of driving safely.
- According to the traffic situation, decide whether to answer the call reasonably. Answer calls when not moving forward or in traffic jams. Try to call after parking.
- Do not engage in nervous or excited conversations to avoid distraction. Please let the caller know that you are driving. Properly maintain and use equipment
Keep the equipment dry
- Moisture and liquid can damage equipment parts or circuits.
- Do not turn on the device when it is wet. If the device is turned on, turn it off (if the device cannot be turned off, please maintain the status quo). Then dry the equipment with a towel a and contact the local MOONDROP service center.
- This equipment is equipped with a built-in liquid indicator. Water damage to the equipment will invalidate the manufacturer’s warranty.
The device should be stored on a flat ground.If the device falls, it will be
damaged.
The device can be used where the atmosphere temperature is between 0°C and
35°C. You can store the device where the ambient temperature is between -20 °C
and 50 °C. Using or storing the device outside the recommended temperature
range may cause damage to the device or shorten battery life
Do not store the device in extremely hot areas, such as in a car in summer, otherwise, the equipment may be damaged or the battery may explode.
- Do not expose the device to direct sunlight for a long time, such as on the dashboard of a car. Do not store the device with metal objects such as coins, keys and necklaces.
- The device may be scratched or malfunction.
- If the battery contacts come in contact with metal objects, it may cause a fire.
- Do not store the device near magnetic fields
- When exposed to a magnetic field, the device may malfunction or the battery may discharge.
- Magnetic stripe cards (including credit cards, phone cards, bank books and boarding cards) may be damaged by magnetic fields.Avoid contact with the device when it is overheated. Otherwise it may cause low temperature burns, redness and skin pigmentation
- After using the device for a long time, pay attention to the heating of the device and avoid contact with the skin for too long.
- Do not sit on the device, or keep in direct contact with your skin for a long time while the device is charging or connected to the power source.
- High temperature resistance varies from person to person.
Please pay special attention when using it by children, the elderly.Protect hearing and ears when using earplugs
- Excessive exposure to strong sounds can cause hearing loss.
- Contact with strong sounds while walking may distract you and cause accidents.
- Always turn down the volume before using earplugs, and use only the lowest volume required to listen to conversations or music.
- If there are foreign objects on the earplugs, and you wear the earplugs for a long time, it may cause ear infections. Please keep the earplugs dry and clean.
- In a dry environment, static electricity may accumulate in the earplugs. Avoid using this earplug in a dry environment, or touch metal objects to discharge static electricity before using the earplug.
- Do not use headphones while driving or riding a horse.
- Otherwise, it may distract you and cause accidents. Depending on your area, this may also be illegal.
- Precautions for using the device during walking or moving.
- Always pay attention to your surroundings to avoid harming yourself or others.
- Do not paint or paste paper on the equipment
- If you are allergic to the paint or metal parts of the device, it may cause itching, eczema or swelling of the skin. When the above situation occurs, please stop using the device and consult a doctor.
- Install the device catiously
Do not place equipment and accessories in or near the airbag deployment area.
If the equipment is improperly placed, the airbag inflates rapidly, which can
cause serious injury.
Do not drop the device or cause collision
-
The device may be damaged or malfunction.
-
If the device is bent or deformed, it may damage the equipment or cause parts malfunction. Ensure the longest service life of the battery and charger
-
If the battery is not used for a long time, the battery may malfunction.
-
The equipment will discharge if left unused for a long time, and must be recharged before use.
-
When the equipment is not in use, disconnect the power supply.
-
The battery can only be used for the designated purpose.
-
Follow all the instructions in this manual to ensure the longest service life of the device and battery. The manufacturer will not provide warranty for damage or poor performance caused by failure to follow the warnings and instructions.
-
The equipment may wear out over time. Although some parts and repairs are guaranteed during the validity period, damage or deformation caused by the use of unapproved accessories is not covered by the warranty. Do not disassemble, modify or repair the equipment
-
Any changes or modifications to the equipment will cause the manufacturer to not guarantee the equipment. For repairing, please contact your local MOONDROP authorized dealer.
-
Do not disassemble or pierce the equipment, as this may cause an explosion or fire.
-
Do not disassemble or reuse the battery.
When cleaning the equipment, please follow the following advices -
Use a soft and dry cloth to wipe the device, use a brush or other tools to remove the earwax or dirt on the earpiece.
-
Clean the battery contacts with a dry cloth.
-
Do not use chemicals or cleaning agents. Otherwise, the surface of the equipment may be discolored or corroded, and it may also cause electric shock or fire.
-
Prevent the equipment from contact with dust, sweat, ink, oil, and chemical products (such as cosmetics, antibacterial sprays, hand sanitizers, detergents and insecticides.)Otherwise, the internal and external parts of the device may be damaged, or the performance may deteriorate. If the device comes into contact with any of the above-mentioned substances, please wipe it with a soft, lint-free cloth.
-
Do not use the device for any purpose other than the designated purpose
-
The device may malfunction.
-
Avoid disturbing others when using the device in public places
-
Only qualified personnel are allowed to repair the device
-
If the equipment is repaired by unqualified personnel, the equipment may be damaged and the warranty will not be provided.
-
Do not distribute copyrighted content
-
Do not distribute copyrighted material without the permission of the content owner. This behavior violated copyright law. The manufacturer is not responsible for any legal problems caused by any illegal actions by users against copyrighted content.
Disclaimer
All content and services available through this device belong to third parties
and are protected by copyright, patents, trademarks and other intellectual
property laws. Such content and services are only for personal non-commercial
use. Without the permission of the content owner or service provider, you may
not be able to use any content or service. In addition to the above
restrictions, unless you have the explicit permission of the application
content or service provider, you may not be able to modify, copy, republish,
upload, post, transmit, translate, or repost, any content or service displayed
through this device. sell, create new derivative works, develop or distribute
in any way. “Third-party content and services are provided. For any purpose,
MOONDROP Company does not provide any express or implied guarantees for the
content or services provided.
MOONDROP Co. expressly declares that it does not assume any implicit
guarantees, Or through regulations, common law, or other means [including but
not limited to marketability or applicability for specific purposes]
recognized terms or conditions. In any case (including negligence), any
content or service provided through this device, Even if it has been notified
in advance that there is a possibility of such damage, whether it is in
contract or tort, any direct, indirect, accidental, special or corresponding
loss or damage compensation costs, attorney fees, various expenses or any
resulting For other losses or damages, or connecting any information
contained, or the results caused by you or any third party using any content
or service, MOONDROP Co. does not guarantees for its accuracy, validity,
timeliness, legality or completeness.” Third-party services may be stopped or
interrupted at any time, and MOONDROP Co. is not responsible or guarantees for
any content or the time period during which the service is available. The
content and services are transmitted by third parties through networks and
transmission equipment outside the control of MOONDROP. In addition to the
generality of the exemption clause, MOONDROP also expressly stated that it
does not assume any responsibility or obligation for any interruption or delay
of any content or service applicable to this device. MOONDROP Co has neither
responsibility nor obligation for customer service involving content and
services. Any service requirements related to content or services should be
directly borne by the content and service providers.
FCC STATEMENT
FCC Warning
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>