MOONDROP Voyager Bluetooth Neckband Earphone User Manual

MOONDROP Voyager Bluetooth Neckband Earphone User Manual

Product Overview

• 0.78mm 2Pin
• Volume“+”
• Volume“-”
• function button ” ○ “
• Buncher
• Microphone
• Microphone

Turn on/Turn off

1. Turn on Long and press the button ” ○ “, and the indicator will show white for 2s, meanwhile, you will hear the prompt ” Power on “.
2. Turn off: Long press the button ” ○ ” when it turns on, the indicator shows orange for 1s, at At the same time, you will hear the prompt ” Power off “.

Connect

1. After turning it on, the device enters pairing mode and you will hear the prompt ” Paring “, the indicator will alternately flash orange and white till the light of ” Pairing failed ” disappears.
2. Pairing time lasts for 2 minutes, and the indicator goes out after 2 minutes.
3. Turn on the Bluetooth function of mobile phones/tablets/computers and other devices search for new devices, and pair with the Bluetooth device ” Voyager “.
4. It’s connected successfully when hearing the prompt of ” Connected “.

Automatic reconnection
When it is turned off and has been connected to the device, it will automatically connect the a previously paired device within 10 seconds after turning it on.

Over-distance disconnection automatic reconnection
The connected smartphone will be disconnected if beyond the effective working distance, and the smartphone will be automatically re-connected when it backs the effective working distance within 5 minutes.

Disconnect the paired device
Long press the Turn on button for 5s, (Hold the button till hearing the prompt of ” Pairing ” ), then it will enter the pairing mode. The indicator alternately flashes the orange and white till the light of ” Pairing failed ” disappears.

Restore factory settings
Open the Bluetooth paired device list, delete the paired Voyager, then click ” ○ ” four times to clean the pairing information, the indicator will show white for 1s to restore factory settings. Then it will enter the pairing mode, the indicator alternately flashes orange and white till the light of ” Pairing failed ” disappears.
Tips: Due to the connection characteristics of the Bluetooth signal, there may be intermittent disconnection or silence occasionally in place with a dense electromagnetic signal interference at 2.4GHZ.

Gain setting
Long press ” + ” and ” – ” for 3s to switch the gain, and Voyager will automatically restart to switch the gain. You’ll hear the prompts of ” Low Gain ” and ” High Gain “.

Charging
It will enter low battery status when the power is lower than 20%, and you’ll hear the prompt ” battery low ” when using it. The orange indicator will be on when charging, and the white indicator will be on for 1 minute when being fully charged.

Function introduction

1. Play/pause: Press the button “○” when the mobile phone device is connected, and click”+” and “-” to adjust the volume Double click “-” or “+” for “previous/next song”
2.  Answer: Click “○” to answer a call
   • Reject:  Double-click “○” to reject a call
   • Hang up: click the “○” to hang up a call
3. Double-click “○” to call Voice Assistant under non-calling Click “○” to close Voice Assistant。

Emergency reset
Press the ” ○ ” 10 times and Voyager can forcibly reset.

Specifications

• Model: Voyager
• Bluetooth version: 5.2
• Protocol: A2DP/AVRCP/HFP/HSP
• Codec protocol: SBC/AAC/aptX/ apt-X-HD/ aptX-Adaptive/LHDC
• Charging port: Type-C
• Working distance: 15m (barrier-free open environment)
• Charging time: About 2 hours
• Battery life: About 12 hours.

After-sales terms
This device can enjoy 7 7-day exchange and 1-year free-repair service if there is any unartificial damage from the date of shipment. If the damage is caused due to improper use, a paid repair service will be provided depending on the condition. If this device is damaged and meets the warranty conditions, please contact the seller to return it under the guidance of the seller by completing the device after-sales list, and attaching it to this device, package, and purchase receipt.

• This device is a precise electronic product, please avoid putting it in damp, dust, and high/low temperatures as well as avoid pulling, collision, and squeezing, to prevent unnecessary damage, which doesn’t enjoy 7 7-day exchange and 1-year free repair.
• Cable breakage, shell deformation, water damage, dust, corrosion or pins broken, tuning material, and unit damage, are out of warranty.
• If the repair can not be provided due to product upgrades within the warranty, we will provide replacement service depending on the condition, and won’t enjoy the warranty after replacement.
• If the product has expired the warranty period, and due to product replacement, our company may not be able to provide repair service.
• We will not be able to provide repair service if the device shell or core parts are seriously deformed due to external force.
• The after-sales service period is generally 7-20 days (excluding transportation time), depending on the repair department.
• About warranty of repair/replacement:

If confirmed that the product issue is of the quality-built after getting the quality inspections by MOONDROP after-service, it will get repaired/replaced, and at that time, the remaining warranty period will be prolonged d to 60days if it is less than or equal to 60 days; Meanwhile, It will be counted according to the original warranty pe read if the remaining warranty period is more than 60 days.

Warranty Card

• For repair, please refer to [After-sales Terms].
• Please fill in this form in detail to ensure that we can provide you with after-sales service.
• Product Issues :
• Purchasing Channel:
• Purchase date:
• Receiving Address:
• Name:
• Contact Phone:

If you do not fill in completely [Receiving Address], [Customer Name], [Contact Phone], we will not be able to give the product back.
After-sales records
MOONDROP Technology Co., Ltd.
Website: moondroplab.com
Address: Haixia Technology Industry Park, Wenjiang District, Chengdu

FCC Warnning

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used by the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body

Download PDF:MOONDROP Voyager Bluetooth Neckband Earphone User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>