oursson MS2050 Multi Cutting Food Chopper Instruction Manual

oursson MS2050 Multi Cutting Food Chopper

Product Information

The MS2050 is a multislicer and shredder that is designed to simplify the process of slicing and grating food ingredients. It has a feeding chute, a cutting unit with sharp blades, and a control panel with a switch. The device is equipped with a safety lock and rubberized feet for stability during use. It requires assembly before use, and it should be cleaned and maintained regularly.

Safety Instructions

The device operates with high voltage, and users should take precautions to prevent electric shock. The device should not be used if water has gotten into it, and only authorized service centers should perform repairs or maintenance. Users with reduced physical, sensory, or mental capabilities should only use the device under the supervision of someone responsible for their safety. The device should not be used with force, as this may damage it.

Product Usage Instructions

Before Use: Wipe the body of the device with a soft, dry cloth. Wash the rest of the parts with warm water and detergent, dry them, and wipe them with a dry clean cloth. Ensure that the device is unplugged before assembling or disassembling it or removing nozzles.

Assembling Order:

1. Place the base on a flat and stable surface.
2. Tilt the cutting unit slightly to the right and insert it into the multi-slicer by turning it counterclockwise until it clicks into place.
3. Select the required shredder/grater and place it inside the cutting unit, aligning the pentagonal hole on it with the shape inside the cutting block.
4. Secure the shredder/grater with the lock by turning it counterclockwise.

Operation:

1. Assemble the device as indicated above.
2. Plug in the device and place a suitable container under the outlet of the cutting unit.
3. Using the pusher, place pre-washed and, if necessary, cleaned and chopped ingredients into the feed chute.
4. Turn on the device by pressing the switch to the on position.
5. At the end of the operation, turn off the device by pressing the switch to the off position and unplug the device.

Usage Recommendations: The maximum allowable time of continuous use of the device is 2 minutes, and there should be a 5-minute break between cycles. After 5 cycles, the break should be 25-30 minutes.
Note: When installing or changing the shredder/grater, hold the plastic part and do not touch the sharp knives.

SAFETY INSTRUCTIONS

Danger symbol
A reminder to user about high voltage.
Warning symbol
A reminder to user about the necessity of operating exactly according to the instructions.

When using electrical appliances should take the following precautions :

• Use the device according to the following instructions manual.
• Install the device on a stable surface.
• Use only the tools, which are included in the product set.
  • To protect against risk of electrical shock do not put the cord in water or other liquid. If for some reason the water got into the unit, contact an authorised service center (ASC) OURSSON AG.
• For power supply, use a power grid with proper characteristics.
• Do not use the device in areas where the air can contain vapors of flammable substances.
  • Never attempt to open the device by yourself –it could possibly be the reason of an electrical shock can lead to product malfunction and will invalidate the manufacturer’s warranty. For re-pair and maintenance, contact only authorized service centers meant for repair of products un-der the trademark OURSSON.
• When moved from a cool to a warm place and vice versa unpack it before use and wait 1-2 hours without turning it on.
  • In order to prevent electrical shock do not immerse the entire product or the wires into the water.
• Be particularly careful and cautious when using the device near children.
• Do not touch any hot parts, as this may cause injury.
• The power cord is specially made relatively short in order to avoid the risk of injury.
• Do not allow the cord to hang over the sharp edge of the table or touch hot surfaces.
• Do not connect this device to a grid which is overloaded with other appliances: it can lead to the fact that the device will not function properly.
• Do not install the device near gas and electric stoves and ovens.
• After use, make sure to disconnect the device from the power grid.
• Keep the device from bumps, falls, vibration and other mechanical influences.
• Make sure to disconnect the device from the power grid before cleaning or changing accessories.
• Do not use the device outdoors.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge. They can only use the device under the supervision of the person responsible for their safety, or after instruction on the safe use of the device. Do not allow children to play with the product.
• This product is intended only for use in the home
• If the power cord is damaged, it must be replaced by a specialist from the authorized service center (ASC) OURSSON AG to avoid danger.
• Use only the tools, which are included in the product set.
• When cleaning the appliance do not use abrasives and organic cleaners (alcohol, gasoline, etc.). When cleaning the device it is allowed to use a small amount of neutral detergent.

RECOMMENDATION

• Please read the instruction manual before using the device. Keep the manual after reading for further use.
• All illustrations in this manual are schematic repre-sentations of real objects, which may differ from the actual images.
• When the device is working, do not open it and do not touch moving parts with hands or other objects to avoid any damage.
• When the device is working, it is forbidden to push products through the feeding chute with fingers or other objects. Use the pusher.
• Do not turn on the device without the shredder/grater installed and fixed.

The device is equipped with a safety lock. If the shredder/grater isn’t installed properly you won’t be able to turn on the device.
The blades are very sharp be careful
The operation of this device in any case does not imply application of any force to it, as this may damage the product due to user fault

PRODUCTS SET

• Body………………………………………………………….. 1 pc.
• Pusher……………………………………………………….. 1 pc.
• Shredder/grater holder (lock) ……………………….. 3 pcs.
• Shredder for slices (thin) ……………………………… 1 pc.
• Shredder for slices (thick)……………………………… 1 pc.
• Large grater for straw ………………………………….. 1 pc.
• Small grater for straw…………………………………… 1 pc.
• Grater for puree…………………………………………… 1 pc.
• Cutting block……………………………………………….. 1 pc.
  Instruction Manual …………………………………………… 1 pc

ELEMENTS OF DESIGN

1. Feeding chute
2. Switch
3. Handle
4. Rubberized feet

UTILIZATION

Control panel

• ON/OFF switch.
• Position of switch:
• «ON» – power ON ;
• «OFF» – power OFF

Before first use, wipe the body of the device with a soft, dry cloth. The rest of the parts wash with warm water and detergent. Dry. Wipe with a dry clean cloth. Before assembling or disassembling the device and / or removing nozzles, make sure that the device is unplugged.

Assembling order

1. Place the base on a flat and stable surface. Tilt the cutting unit 9 slightly to the right and insert it into the multi slicer by turning it counterclockwise until it clicks into place, Pic. С-1.
2. Select the required shredder/grater, Pic. D-3.
3. Place the shredder or grater inside the cutting unit 9 Pic. C-2. Rotate the shredder/grater slightly so that the pentagonal hole on it aligns with the shape inside the cutting block.
4. Secure the shredder/grater with lock 3 by turning it counterclockwise, Pic. C-3.
   NOT E: To change the shredder/grater, unlock it by turning the lock 3 clockwise, Pic. C-4. Replace the shredder/ grater and secure it again with the lock 3 .
   When installing/changing the shredder/grater, hold the plastic part, and do not touch the sharp knives

Order of operation:

1. Assemble the device as indicated in the previous section, Pic. C.
2. Plug in the device. Place a suitable container under the outlet of the cutting unit 9.
3. Using the pusher, place pre-washed and, if necessary, cleaned and chopped ingredients into the feed chute, Pic. D-1.
4. Turn on the device by pressing the switch “ON position”, Pic. D-2.
5. At the end of the operation, turn off the device by pressing the switch “Position -OFF” and unplug the de

The maximum allowable time of continuous use of the device is 2 minutes. The break between cycles should be 5 minutes. After 5 cycles, the break should be 25-30 minutes.
Do not grind the ingredients which temperature is higher than 80°С. Let them cool.

PREPARATION RECOMMENDATIONS
Before grinding, it is recommended that the ingredients be washed/cleaned and cut into pieces.

Grater for straws (large / small) 6 , 7
Preparing salads, appetizers, preparing vegetables for soups and main courses, chopping cheese and boiled eggs.| Cut the initial ingredients into pieces (carrots, zucchini, peppers, potatoes, hard cheese, chocolate) so that they freely pass through the feed chute, press them with a pusher to the grater.| Let the boiled vegetables cool completely before grating them.
Slicing (thin/thick) 4 , 5
Preparing salads, appetizers, preparing vegetables for soups and main courses, slicing.| The ingredients should be dense (cucumbers, radishes, peppers, fresh potatoes, carrots, zucchini, cabbage, etc., smoked sausages, hard cheeses, etc.). Pre-cut them into portions so that they freely pass through the feed chute. Push the ingredients with the pusher, pressing them lightly.| Store sausages and cheese in the refrigerator before slicing.
Grater (for puree) 8
Preparation of baby food, grinding to a gruel/powder state, grating products.| Prepare the initial ingredients (hazelnuts, walnuts, dry bread, garlic, zest) cut them if necessary (hard cheese, chocolate). Push the ingredients with the pusher, pressing them lightly.|

CLEANING AND MAINTENANCE

• Clean all the parts of the device immediately after use.

• Switch off the device. Unplug it.

• Remove the pusher from the feed chute.

• Make sure that the moving parts have stopped.
  Then disconnect the shredder/grater by turning the lock clockwise, Pic. C-4. Remove the shredder/ grater from the cutting unit and detach the cutting unit from the body by tilting it slightly to the right, Pic. C-5.

• All removable elements can be washed in warm water using non-abrasive detergents. They cannot be washed in the dishwasher

• Wipe the motor unit with a soft damp cloth. Never immerse the motor unit in water due to the danger of electric shock.

• Dry all parts of the device thoroughly and store in a dry and clean place.

POSSIBLE PROBLEMS AND SOLUTIONS

and wait until the voltage normalizes.
Device stopped working| The motor overheating protection may have tripped.| Unplug the device from the power supply and let it cool down for 15-20 minutes. Then plugin the device and turn it on. If the problem persists, contact an authorized oURSSon service center.
The device began to work slowly| Perhaps a hard piece is stuck.| Turn off the device, unplug it. Remove the attachment lock and remove it from the cutting unit. Remove the stuck pieces of the product.

SPECIFICATIONS

*Products must be stored in dry, ventilated warehouses at a temperature not lower than -25°С.

PRODUCT CERTIFICATION

• For information on product certification, see http://www.oursson.com or ask seller for a copy.
• Only a qualified specialist from OURSSON AG service center must do the repair.

SERVICING

Company OURSSON AG expresses great appreciation to you for choosing our products. We have done every-thing possible so that this meets your needs, and the quality corresponds to the best world standards. If your OURSSON branded product will need maintenance, please contact one of the authorized service center (hereinafter – ASC). A complete list of ASC and their exact addresses can be found on the website www.oursson.com.

Warranty obligations OURSSON AG:

1. Warranty obligations OURSSON AG, provided ASC OURSSON AG, apply only to models designed OURSSON AG for the production or supply and sale within the country where the warranty service is provided, purchased in this country, certified for compliance with the standards of this country, and also marked the with official marks of conformity. Warranty obligations OURSSON AG operate within the law on the protection of consumer rights and are regulated by the laws of the country in which they are provided, and only when the product is used exclu-sively for personal, family or household purposes.
2. Warranty obligations OURSSON AG shall not apply to uses of goods for business purposes or in connection with the acquisition of goods to meet the needs of enterprises, institutions and organizations.
3. OURSSON AG sets for its products the following terms of use and warranty periods

Product name

| Terms of use, months| Warranty Period, months
---|---|---
Microwave ovens breadmakers, induction hobs Multicookers, kitchen processors, electric kettles, electric grills, hand blenders, hand mixers, meat grinders, blenders, toasters, airpots, toasters, juicers, steamers, coffee makers, choppers, freezers, refrigerators, automatic coffee machines, milk frother, multi shredder Kitchen scales|

60

|

12

4. Warranty obligations OURSSON AG shall not apply to the following products if their replacement is assumed and is not connected with disassembling products:

5. Batteries.

6. Cases, straps, cords for carrying, mounting accessories, tools, and documentation that came with the product.

7. Warranty does not cover defects caused due to violations of the rules of consumer use, storage or transportation of the goods, actions of third parties or force majeure, including but not limited to the following cases:

8. If the defect was a result of careless handling, used for other purposes, violations of conditions and rules of operation set forth in the instruction manual, including as a result of exposure to high or low temperatures, high humidity or dust, traces of opening the device independently and/ or self-repair, mismatch state standards for power grids, getting liquids, insects or other foreign objects, substances inside the device, as well as long-term use of the product in extreme operational modes.

9. If the defect of the product was a result of unauthorized attempts to test the product or make any changes in its construction or software programs, including repair or maintenance in unauthorized service centers.

10. If the defect of the product was a result of use of non-standard and/or low-quality equipment, accessories, spare parts, or batteries.

11. If the defect of the product is associated with its use in conjunction with additional equipment (accessories), other than additional equipment recommended by OURSSON AG for use with this product. OURSSON AG is not responsible for the quality of the additional equipment (accessories) manufactured by third parties, for the quality of its products together with such equipment, as well as the quality of the work of the additional equipment of OURSSON AG together with the products of other manufacturers

12. Product defects detected during the lifetime of the product are eliminated by the authorized service centers (ASC). During the warranty period, the elimination of defects is free of charge with the presentation of the original certificate of guarantee and documents that confirm the fact and date of the contract of retail purchase. In the absence of such documents, the warranty period is calculated from the date of manufacture of goods. It should be taken into account:

13. Setup and Installation (assembly, the connection, etc.) of the product described in the documentation attached to it, does not enter the scope of warranty OURSSON AG and can be performed by the user as well as the specialists of most authorized service centers on a paid basis.
    Work upon the maintenance of products (cleaning and lubricating the moving parts, replacement of consumables and supplies, etc.) are made on a paid basis.

14. OURSSON AG is not responsible for any damage directly or indirectly caused by their products to people, pets, or property if it occurred as a result of non-observance of the rules and conditions of use, storage, transportation or installation of the product, intentional or negligent actions of consumer or third parties.

15. Under no circumstances, OURSSON AG is not responsible for any special, incidental, indirect or consequential loss or damage, including but not limited to: lost profits, damages caused by interruptions in the commercial, industrial or other activities, arising from the use of or inability to use the product.

16. Due to continuous product improvement, design elements and some technical specifications are subject to change without prior notice from the manufacturer.

Using the product when after the terms of use (lifetime):

1. The lifetime set by OURSSON AG for this product applies only when the product is used exclusively for personal, family or household needs, as well as the consumer ob-serves the correct operation, storage, and transportation of products. Under the condition of careful handling of the product and compliance with the rules of operation, the actual life may exceed the lifetime set by OURSSON AG.
2. At the end of the product’s lifetime, you should contact an authorized service center for to conduct preventive maintenance of the product and determine its suitability for further use. Work on conducting preventive maintenance of the products is also made in service centers on paid basis.
3. OURSSON AG does not recommend the use of this product after the end of its lifetime without its preventive maintenance by the authorized service center, in this case, the product can be dangerous to the life, health or property of the consumer.

Product Recycling and Disposal

• This appliance has been identified in accordance with the European directive 2002/96/EG on Waste Electrical and Electronic Equipment – WEEE.
• After the expiration of the lifetime, the product cannot be disposed of with other household waste. Instead, it shall be deposited in the appropriate recycling collection point for electrical and electronic equipment for proper treatment and disposal in accordance with federal or local law. By disposing correctly of this product, you will help to conserve natural resources and prevent the product from damaging the environment and human health. For more information on the collection point and recycling of this product, please contact your local municipal authorities or the enterprise for household waste disposal.

Date of manufacture

Each product has a unique serial number in the form of an alphanumeric row and is duplicated with a barcode that contains the following information: name of the product group, date of manufacture, and serial number of the product. The serial number is located on the rear of the product, on the package and the warranty card.

1. The first two letters-correspondence to the product group (Multi shredder – MS).
2. The first two digits – the year of manufacture.
3. The second two digits – week of manufacture.
4. The last two digits – the serial number of the product.

To avoid misunderstandings, we highly rec-ommend you to read carefully the instruc-tion manual and the warranty obligations. Check the correctness of the warranty card. Warranty card is valid only if the following are correctly and clearly stated: model, se-rial number, date of purchase, clear stamps, buyer’s signature. The serial number and the model of the device must be the same as in the warranty card. If these conditions are not fulfilled or the data specified in the warranty card was changed, the warranty card is invalid.
If you have questions or problems with OURSSON AG products – please contact us by e-mail:
support@oursson.com
This manual is under protection of international and EU copyright law. Any unauthorized use of the instructions, including copying, printing and distribution, but not limited to, involves the application of the guilty person to civil liability and criminal liability.

Contact information:

1. Manufacturer of goods – OURSSON AG (Orson AG), Rue du Grand-Chêne 5, 1003 Lausanne, Switzerland.
2. Certification information product available on the website www.oursson.com.

OURSSON AG
Made in China

References

• Oursson Forum • Главная страница
• OURSSON / Oursson
• OURSSON / Oursson
• OURSSON / Oursson

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>