oursson MD2033 Microwave Oven Instruction Manual

MD2033
Instruction manual

MD2033 Microwave Oven

SAFETY INSTRUCTIONS, Fig. A

Danger symbol
A reminder to user about high voltage.
Warning symbol
A reminder to user about the necessity of operating exactly according to the instructions.
When using electrical appliances should take the following precautions:

• Use the device according to the following instructions manual.

• Install the device on a stable surface.

• Use only the tools, which are included in the product set.

• To protect against risk of electrical shock do not put the cord in water or other liquid. If for some reason the water got into the unit, contact an authorized service center (ASC).

• For power supply, use a power grid with proper characteristics.

• Do not use the device in areas where the air can contain vapors of flammable substances.

• Never attempt to open the device by yourself – it could possibly be the reason of an electrical shock can lead to product malfunction and will invalidate the manufacturer’s warranty. For repair and maintenance, contact only authorized service centers meant for repair of products under the trademark OURSSON.

• When moved from a cool to a warm place and vice versa unpack it before use and wait 1-2 hours without turning it on.

• In order to prevent electrical shock do not immerse the entire product or the wires into the water.

• Be particularly careful and cautious when using the device near children.

• Do not touch any hot parts, as this may cause in- jury.

• The power cord is specially made relatively short in order to avoid the risk of injury.

• Do not allow the cord to hang over the sharp edge of the table or touch hot surfaces.

• Do not connect this device to a grid which is overloaded with other appliances: it can lead to the fact that the device will not function properly.

• Do not install the device near gas and electric stoves and ovens.

• After use, make sure to disconnect the device from the power grid.

• Keep the device from bumps, falls, vibration and other mechanical influences.

• Make sure to disconnect the device from the power grid before cleaning or changing accessories.

• Do not use the device outdoors.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge. They can only use the device under the supervision of the person responsible for their safety, or after instruction on the safe use of the device. Do not allow children to play with the product.

• This product is intended only for use in the home.

• If the power cord is damaged, it must be replaced by a specialist from the authorized service center (ASC)  reminder to user about the necessity of operating
  Risk of burn symbol
  Reminder for user of high temperatures to avoid danger.

• Use only the tools, which are included in the product set.

• When cleaning the appliance do not use abrasives and organic cleaners (alcohol, gasoline, etc.). When cleaning the device it is allowed to use a small amount of neutral detergent.

DANGER OF EXPOSURE TO MICROWAVE ENERGY

• Do not try to use microwave oven with opened door, it can lead to dangerous exposure to microwave energy. It is very important not to disrupt or interfere with the safety interlocks the door.
• Do not place any object between the door and surface of the inner chamber of the microwave, do not allow dirt and remains of the detergents to accumulate on the surfaces of the microwave oven.
• If you don’t keep the microwave clean, the state of its surface may deteriorate and aff ect the life of the microwave oven or lead to dangerous situations. Microwave energy output may occur.
  Clean the microwave timely and immediately remove all food remains. Always keep the working chamber clean, door seals, door and door opening limiter.
  Drops of fat must not get on the mica plate.

Do not open the body of the device. The oven operates under high voltage.
If the door or door seals are damaged, mi- crowave must not be used, until the specialist from service center resolves the problem.
All repairs and maintenance of the device, associated with the removal of covers, that provide protection from microwave exposure, must be made by a qualified specialist.

• The bulb inside the oven can only be replaced by a specialist.

FIRE HAZARD

• Microwave is intended only for food and drinks heating.
  Drying food or cloths, heating warmers, slippers, sponges, damp cloth and other similar objects may cause a fire.

• Remove metal objects (wire, foil, etc.) from paper or plastic containers before using them in the microwave.

•  If smoke comes out from the microwave, unplug the device and do not open the microwave door, to avoid fire spreading.
  When heating food in paper or plastic containers, watch the microwave, fire may occur.

BURN HAZARD

• It isn’t allowed to prepare eggs in whole shells, they may blow up even after the device stops working.
• Drinks that are heated in the microwave may boil, be careful when removing containers from the microwave.
• Use potholders when taking dishes out of the oven.
• After heating baby bottles or baby food, you must shake them and check the temperature before giving them to babies.
• The microwave surfaces are heating up when the device is working. The temperature of the surfaces may be high.

Liquids and other products mustn’t be heated in closed containers to avoid explosion!
RECOMMENDATIONS

• Please read the instruction manual before using the device. Keep the manual after reading for further use.
• All illustrations in this manual are schematic representations of real objects, which may differ from the actual images.
  The device is equipped with a safety lock. If the door of the device isn’t locked properly, you won’t be able to turn on the device.
  The operation of this device in any case does not imply application of any force to it, as this may damage the product due to user fault.

PRODUCT SET, Рiс. B

1. Microwave oven ………………………………………….. 1 pc.
2. Glass turntable, 245 mm ……………………………… 1 pc.
3. Roller ring ………………………………………………….. 1 pc.
   Instructions manual …………………………………………. 1 pc.
   Warranty card …………………………………………………. 1 pc.

ELEMENTS OF DESIGN, Рiс. B

1. Body of the device
2. Holder
3. Control panel
4. Latch (door locking mechanism)
5. Door with a viewing window
6. Radiation source
7. LED-display

INSTALLATION, Рiс. A-1

• When installing the microwave chose a flat surface, which provides enough space for microwave ventilation and door opening of the microwave.
• Minimal space between side and rear panels of the microwave and walls must be at least 10 cm.
• Distance above the upper panel of the microwave must be at least 15-20 cm.
•  Do not remove legs from the lower panel of the mi- crowave.
• Do not remove the gray mica plate from the inner chamber of the microwave it protects the magnetron.
•  Blocking the microwave ventilation may damage the device.
• Install the microwave as far away from radios and televisions as possible. Microwave can affect their performance.
•  Plug in the microwave into a grounded socket, Pic. A.
• Open the door and install the roller ring and a turntable plate, combining the clamp on the turntable with a holder in the center of the microwave. Check if the turntable is installed tight: it shouldn’t be turning freely. Close the door.
• Your microwave is ready for work and is in standby mode.

UTILIZATION
Control panel, Рiс. B-5

| Microwave power setting button
---|---
| Button for selecting the defrost mode; setting hours/minutes
| The express-cooking button
| Automatic program selection button auto
| Multifunctional rotary switch TIME/WEIGHT
| STOP button; cancel the program; lock the control panel
| START/QUICK START button

Before first use, wipe the body 1 , inner surface and roller ring 3 with a clean dry cloth. Wash the glass turntable 2 in warm water with dishwashing detergent.

MATERIALS THAT ARE ALLOWED TO BE USED IN MICROWAVE

For cooking or heating in the microwave, use only cookware that is suitable for this. Dishes that are designed for use in microwaves have a special symbol on them. If you have doubts about cookware that can be used in microwaves, ask the manufacturer of the dishes, or perform the next test:

1. Place into the microwave one container that is suitable for microwaves and fill it with one 250ml cup of water, and place an empty test container.
2. Turn on the microwave on a maximum temperature for 1 minute.
3. After it stops, check the empty container, if it is hot, it isn’t suitable for microwaves.

Aluminum foil| Just as protection. Can be used for coating thin slices of meat or poultry to avoid sticking. Arcing can occur if the foil is too close to the inner walls of the oven. The foil should be positioned at least 2.5 cm from the walls.
---|---
Pottery| Follow the instructions of the manufacturer. Do not use dishes that contain decorative metal trims, splits and cracks.
Tableware| Follow the instructions of the manufacturer. Do not use dishes that contain decorative metal trims, splits and cracks.
Glass jars| Always remove the lid. Use only for heating food. Many glass jars are not made of heat-resisting glass and may burst.
Glassware| Ware made of a heat-resistant glass. Make sure there are no metal trims. Do not use ware with splits and cracks.
Oven bags| Follow the instructions of the manufacturer. Do not use metal wire. Make holes for steam.
Paper plates and cups| Use only for heating food. Don’t leave the device unattended when cooking.
Paper towels| Use only for heating food, to prevent splattering or as a package for steaming. Don’t leave the device unattended when cooking.
Parchment| Use only for heating food, to prevent splattering or as a package for steaming.
Plastic ware| Follow the instructions of the manufacturer. Ware that is designed for use in microwaves has a special symbol on them. Some plastic containers get soften when used in microwaves. Bags for steaming and tightly closed plastic bags should be pre-pierced for the steam.
Plastic packaging| Plastic packaging may be used to wrap food and prevent moisture from coming out when heated. Do not allow plastic packaging to come in contact with food.
Thermometers| Follow the instructions of the manufacturer. Use special thermometers for measuring temperature of meat, poultry and fish.
Wax paper| Use only for heating food, to prevent splattering and keeping moisture in food. Wrap loosely, leaving holes for steam.
Aluminum pans| Can cause arcing. Put the food in a bowl that is safe for use in microwave ovens.
Food cardboard with metal handles
Metal plates|
Paper bags| May catch fire.
Metal wires| Arcing can occur that may cause a fire in the microwave.
Soap| Can melt and cause contamination of the microwave.
Wood| Dries when used in microwave, can crack.

ORDER OF OPERATION

Setting the clock:

1. Plug in the microwave, display will show «01:00» and you will hear a sound signal.
2.  Press and hold button for 3 seconds. First two numbers will flash on the display.
3.  Turn the switch TIME/WEIGHT left and right to set the current time.
4.  Press . button. Minute numbers will flash on the display. With the help of the switch set the minutes.
5.  Press button again or wait for 60 second for the time setting to complete. « : » indication will flash and set time will be displayed.

Preparing in the «microwave» mode:

1. Press button several times to select the power level. Display will show a predetermined microwaves power level 100% – «100Р», 80% – «80Р», 60% – «60Р», 40% – «40Р», 20% – «20Р».
2.  Turn the switch TIME/WEIGHT, to set the cooking time. Maximum time – 60 min.
3.  Press button to start cooking.

Express-cooking:

1.  For a quick heat up of a drink or any other product press button required number of times.
   First press sets timer to 30 sec (max. power, other settings are unavailable), second press – 1 min, third press – 1 min 30 sec, fourth – back to 30 sec.

2. Press button to start cooking.

Quick Start:
In standby mode, press button required number of times. The oven will work in the «Microwave» mode with max. power level 100%. First press sets the timer to 60 sec, every other press of the button adds 10 sec. It is convenient for a quick heating up of the dishes.

Defrost by weight:

1. Press button required number of times, depending on the type of defrosting product. One press – meat – «d.1», poultry – «d.2», seafood – «d.3».
2.  Turn the multifunctional switch TIME/WEIGHT left or right to select the weight of defrosting product. For meat – from 0,1 to 2 kg, for poultry – from 0,2 to 3 kg, for seafood – from 0,1 to 0,9 kg. It is recommended not to exceed the specified parameters.
3.  Press button to start cooking.
   NOTE: After half of set time passes, a beep will sound. To achieve a more effective defrosting it is necessary to flip the products, close the door and press .  button again to continue defrosting.

Automatic cooking programs:

1. In standby mode press  button required number of times to select the program. Automatic programs indication will be displayed from «A-1» to «A-8».
2.  Turn the switch TIME/WEIGHT left or right to select the weight/quantity of the product.
   Display indication| Product type
   ---|---
   А-1| Popcorn
   А-2| A bowl of soup or reheating of the product
   А-3| Drink
   А-4| Pizza
   А-5| Potato
   А-6| Vegetables
   А-7| Meat
   А-8| Fish
3. Press button to start cooking.
   NOTE: The result of automatic cooking programs depends on such factors as voltage fluctuations, the shape and size of foods, personal taste preferences.
   If the result of automatic cooking programs does not fully meet the expectations, it is recommended to use standard microwave cooking methods.

Timer function (delayed start):

1. Set the current time as mentioned above.

2.  Press button required number of times to select power.

3. Turn the multifunctional switch TIME/WEIGHT to set the cooking time.

4. Press and hold button for 3 seconds to display the current time.
   Set the delayed start time similarly to the current time setting.

5. Press   button to confirm the delayed start mode.

Parent control:

1. In standby mode press and hold button for 3 seconds. A long beep will sound and the microwave will enter into the lock mode.
2. To unlock it, press and hold   button for 3 seconds. A long beep will sound. Control panel will unlock.
   NOTE: Only control panel is locked in the lock mode.

Never use microwave device without the turntable.
Operation of the device without dishes will lead to overload. Turning on the microwave mode with an empty dish is prohibited. The exception is a short-term test of the dishes suitability.

MICROWAVE POWER LEVEL MATCHING THE DESIGNATIONS ON THE CONTROL PANEL

Power level type| Designation on the control panel| Microwave power in %| Usage
---|---|---|---
Maximum| 100 P| 100%| • Water boiling
• Cooking mince
• Cooking vegetable and poultry
• Cooking small pieces of tender meat
High| 80 P| 80%| • Cooking big pieces of meat and a whole chicken.
• Cooking mushrooms and seafood.
• Cooking dishes that contain eggs and cheese.
Middle| 60 P| 60%| • Stewing poultry.
• Cooking fish.
• Cooking egg dishes.
• Preparing custard.
• Cooking soup and different cereals.
Low| 40 P| 40%| • Defrosting different products.
• Melting chocolate and butter.
• Stewing tough meat.
Minimal| 20 P| 20%| • Softening cheese.
• Softening ice cream.

Popcorn in the microwave: Never set a toohigh temperature, max – 700 W. Popcorn bagmust be placed on the glass turntable. Due toan overload the glass may crack.
When heating up liquid always place a spoon in it. Thanks to this, the boiling will start faster, Pic. A-2

POSSIBLE PROBLEMS AND SOLUTIONS

• The power cord ill plugged.
• No voltage in the socket.
• Mode is improperly set.
Condensation on the grill grate and walls of the microwave.| •  When cooking food that contains water, steam is formed, which partly comes out the microwave and partly settles as a condensate on the grill grate and walls of the microwave.
Spark inside the microwave.| •  When preparing in «Microwaves» mode, do not turn the microwave on without loading products first.
•   Remove the packaging that contains metallic parts.
•  Do not use dishes that contain decorative metal trims.
Products are not heated enough.| • You have selected an incorrect microwave mode.
•  Frozen products haven’t been defrosted before cooking.
Products burn up.| •  You have selected an incorrect microwave mode.
Food heats unevenly.| • When cooking, several times suspend the program and mix the food.
• Products that are cut same size heat more evenly.
• Do not rotate the glass turntable.

CLEANING AND MAINTENANCE

Before cleaning, unplug the microwave.
Clean the device inside and outside with a damp soft cloth and soft detergents. Then wipe it dry with a clean cloth.

not use scrapers.
Indentations on the bottom of the operational chamber| Damp cloth. Water mustn’t get into the device through the turntable’s drive.
Glass turntable and roller ring| Warm soapy water. Make sure the turntable is locked properly.
Glass door| Glass cleaner detergent. Clean with a soft cloth. Do not use scrapers.
Seal| Warm soapy water. Clean with soft cloth. Do not rub! Do not use scrapers.

TEST DISHES IN ACCORDANCE WITH EN 60705
Authorities check the quality and proper operation of the microwave oven with these dishes.
In accordance with EN 60705, IEC 60705 or DIN 44547, EN 60350 (2009)
Bringing to readiness and defrosting with microwaves

| Microwave preparation
---|---
Dish| Microwave Power (Watts) cooking time (min)| Notes
Omelet, 750 g.| 360 W, 12-17 min + 90 W, 20-25 min| Place the Pyrex mold 20×25 cm on a rotating stand
Bisquit| 600 W, 8-10 min| Place the Pyrex mold 22 cm on a rotating stand
Meatloaf| 600 W. 20-25 min| Place the Pyrex mold on a rotating stand
Defrost with microwaves
Dish| Microwave Power (Watts) cooking time (min)| Notes
Meat| 180 W, 807 min + 90 W, 10-15 min| Place the Pyrex mold 22 cm on a rotating stand
Defrost with microwaves| |
Dish| Microwave Power (Watts) cooking time (min)| Notes
/
Potato casserole| Grill + 360 W, 35-40 min| Place the Pyrex mold 22 cm on a rotating stand

Specifications

*Products should be stored in dry, ventilated warehouses at temperatures below – 25°C.

PRODUCT CERTIFICATION

For information on product certification, see http://www.oursson.com or ask seller for a copy.
Only a qualified specialist from service center must do the repair.

SERVICING OURSSON
expresses great appreciation to you for choosing our products. We have done everything possible so that this meets your needs, and the quality corresponds to the best world standards. If your OURSSON branded product will need maintenance, please contact one of the authorized service center (hereinafter – ASC). A complete list of ASC and their exact addresses can be found on the website www.oursson.com.

Warranty obligations:

1. Warranty obligations, provided ASC, apply only to models designed for the production or supply and sale within the country where the warranty service is provided, purchased in this country, certified for compliance with the standards of this country, and
   also marked the with official marks of conformity.

2. Warranty obligations operate within the law on protection of consumer rights and are regulated by the laws of the country in which they are provided, and only when the product is used exclusively for personal, family or household purposes. Warranty obligations shall not apply to uses of goods for business purposes or in connection with the acquisition of goods to meet the needs of enterprises, institutions and organizations.

3. The manufacturer sets for its products the following terms of use and warranty periods:
   Product name| Terms of use, months| Warranty Period, months
   ---|---|---
   Microwave ovens breadmakers, induction hobs Multicookers, kitchen processors, electric kettles, electric grills, hand blenders, hand mixers, meat grinders, blenders, toasters, airpots, toasters, juicers, steamers, coffee makers, choppers, freezers, refrigerators, automatic coffee machines Kitchen scales| 60| 24

4. Warranty obligations shall not apply to the following products, if their replacement is assumed and is not connected with disassembling products:
   • Batteries.
   • Cases, straps, cords for carrying, mounting accessories, tools, documentation that came with the product.

5. Warranty does not cover defects caused due to violations of the rules of consumer use, storage or transportation of the goods, actions of third parties or force majeure, including but not limited to the following cases:
   • If the defect was a result of careless handling, used for other purposes, violations of conditions and rules of operation set forth in the instruction manual, including as a result of exposure to high or low temperatures, high humidity or dust, traces of opening the device independently and/ or selfrepair, mismatch state standards for power grids, getting liquids, insects or other foreign objects, substances inside the device, as well as long-term use of the product in extreme operational modes.
   • If the defect of the product was a result of unauthorized attempts to test the product or make any changes in its construction or software programs, including repair or maintenance in unauthorized service centers.
   • If the defect of the product was a result of use of non-standard and/or low quality equipment, accessories, spare parts, batteries.
   • If the defect of the product is associated with its use in conjunction with additional equipment (accessories), other than additional equipment recommended for use with this product. The manu- facturer is not responsible for the quality of the additional equipment (accessories) manufactured by third parties, for the quality of its products together with such equipment, as well as the quality of the work of the additional equipment together with the products of other manufacturers.

6. Product defects detected during the lifetime of the product are eliminated by the authorized service centers (ASC). During the warranty period, elimination of defects is free of charge with the presentation of the original certificate of guarantee and documents that confirm the fact and date of the contract of retail purchase. In the absence of such documents, warranty period is calculated from the date of manufacture of goods. It should be taken into account:
   • Setup and Installation (assembly, the connection, etc.) of the product described in the documentation attached to it, does not enter the scope of warranty and can be performed by the user as well as the specialists of most authorized service centers on a paid basis. • Work upon maintenance of products (cleaning and lubricating the moving parts, replacement of consumables and supplies, etc.) are made on a paid basis.

7. The manufacturer is not responsible for any damage directly or indirectlycaused by their products to people, pets, property, if it occurred as a result ofnon-observance of the rules and conditions of use, storage, transportation or installation of the product, intentional or negligent actions of consumer or third parties.

8. Under no circumstances, the manufacturer is not responsible for any special, incidental, indirect or consequential loss or damage, including but not limited to: lost profits, damages caused by interruptions in the commercial, industrial or other activities, arising from the use of or inability to use the product.

9. Due to continuous product improvement, design elements and some technical specifications are subject to change without prior notice from the manufacturer.

Using the product when after the terms of use (life- time):

1. Lifetime set by manufacturer for this product applies only when the product is used exclusively for personal, family or household needs, as well as the consumer observes the correct operation, storage and transportation of products. Under thecondition of careful handling of the product and compliance with the rules of operation the actual life may exceed the lifetime set by manufacturer.
2. At the end of the product lifetime, you should contact an authorized service center for to conduct a preventive maintenance of the product and determine the suitabilityfor further use. Work on conducting a preventive maintenance of the products is also made in service centers on paid basis.
3. The manufacturer does not recommend the use of this product after the end of its lifetime without its preventive maintenance by the authorized service center, since inthis case, the product can be dangerous to the life, health or property of the consumer. Product Recycling and Disposal This appliance has been identified in accordance with the European directive 2002/96/EG on Waste Electrical and Electronic Equipment – WEEE. After the expiration of the lifetime, the product cannot be disposed with another household waste. Instead, it shall be deposited in the appropriate recycling collection point for electrical and electronic equipment for proper treatment and disposal in accordance with federal or local law. By disposing correctly this product, you will help to conserve natural resources and preventing the product from damaging the environment and human health. For more information on the collection point and recycling of this product, please contact your local municipal authorities or the enterprise for household waste disposal. Date of manufacture Each product has a unique serial number in the form of alphanumeric row and is duplicated with a barcode that contains the following information: name of the product group, date of manufacture, serial number of the product.

Serial number is located on the rear of the product, on the package and the warranty card.

1. The first two letters-correspondence to the product group (microwaves – MM/MD).
2. The first two digits – year of manufacture.
3. The second two digits – month of manufacture.
4. The last two digits – serial number of product.

To avoid misunderstandings, we highly recommend you to read carefully the instruction manual and the warranty obligations. Check the correctness of the war- ranty card. Warranty card is valid only if the following are correctly and clearly stated: model, serial number, date of purchase, clear stamps, buyer’s signature. The serial number and the model of the device must be the same as in the warranty card. If these conditions are not fulfilled or the data specified in the warranty card was changed, the warranty card is invalid.
If you have questions or problems with OURSSON products – please contact us by e-mail: support@oursson.com
This manual is under protection of international and EU copyright law. Any unauthorized use of the instructions, including copying, printing and distribution, but not limited to, involves the application of the guilty person to civil liability and criminal liability.
Contact information:

1. Manufacturer of goods – «Zhongshan Donlim Weili Electrical Appliances Co.,LTD», No.1 Dong Wei Road, Fusha Industrial Park, Fusha Town, Zhongshan City, Guangdong, China.
2. Certification information product available on the website www.oursson.com.
   Made in China

forum.oursson.ru

http://www.oursson.com/rus/ru/support/recipes/

Documents / Resources

| oursson MD2033 Microwave Oven [pdf] Instruction Manual
MD2033, Microwave oven, MD2033 Microwave Oven, Oven
---|---

References

• Oursson Forum • Главная страница
• OURSSON - интернет-магазин кулинарных инноваций и товаров для приготовления здоровой еды
• OURSSON / Oursson
• OURSSON / Oursson

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>