V I V O MOUNT-PC07G Deskside and Wall Gaming PC Mount Instruction Manual

: October 30, 2023
: V I V O

Table of Contents

V I V O MOUNT-PC07G Deskside and Wall Gaming PC Mount
Product Information
Product Usage Instructions
PACKAGE CONTENTS
TOOLS NEEDED
ASSEMBLY STEPS
Documents / Resources

V I V O MOUNT-PC07G Deskside and Wall Gaming PC Mount

Product Information

Deskside and Wall Gaming PC Mount

The Deskside and Wall Gaming PC Mount is a versatile product that allows you to securely mount your gaming PC to your desk or wall. The package includes an inner shelf, outer shelf, left and right support brackets, clamps, locking brackets, wing nuts, screws, and other necessary hardware to assemble the mount. The product has a weight capacity of 66 lbs (30 kg) and can be used on clamp/wood/concrete/brick surfaces up to 66 lbs and drywall up to 22 lbs (10 kg).

Product Usage Instructions

Remove adhesive backing from Thin Pads (G) and place them onto Inner and Outer Shelves (A, B).
Attach Left and Right Support Brackets (C, D) to Inner Shelf (A) using M4x6mm Screws (S-B) and a Phillips screwdriver.
Attach Outer Shelf (B) to Inner Shelf (A) using Wing Nuts (S-A).
Remove adhesive backing from Thick Pads (H) and apply them to Inner and Outer Shelves (A, B).
Option A: Clamp Installation – Attach Clamps (E) to Left and Right Support Brackets (C, D) using M6x6mm Screws (S-C) and 4mm Allen Wrench (T-A), so that the clamps are offset towards the center of the mount. Attach the mounting assembly to a desktop and adjust the width using Wing Nuts (S-A) and place the PC into the mount.
Option B: Concrete Anchor Installation – Use ST5.5x38mm Screws (W-A) and Concrete Anchors (W-B) to attach the mounting assembly to a concrete or brick surface.
Option C: Drywall Anchor Installation – Use Self-Tapping Drywall Anchors (W-C) and ST4.2x35mm Screws (W-D) to attach the mounting assembly to a drywall surface.
Option D: Molly Bolt Installation – Use M6x60mm Molly Bolts (W-E) to attach the mounting assembly to a wood surface.

Note: Some hardware included may not be used. Tools needed for installation include a Phillips screwdriver, stud finder, pencil, drill, and level. Adult supervision is required, and the product is not suitable for children under 3 years old due to small parts that can be a choking hazard.
If you need any assistance with installation or have received damaged or defective parts, please contact our dedicated support team at help@vivo- us.com or call 309-278-5303. Our support team is available Monday – Friday from 7:00 am-7:00 pm CST and has an average response time of 1 hour 8 minutes.

WARNING!

If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.

WARNING: CHOKING HAZARD

SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

PACKAGE CONTENTS

NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED

TOOLS NEEDED

DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.

ASSEMBLY STEPS

STEP 1

Remove adhesive backing from Thin Pads (G) and place them onto Inner and Outer Shelves (A,B).

STEP 2

Attach Left and Right Support Brackets (C,D) to Inner Shelf (A) using M4x6mm Screws (S-B) and a Phillips screwdriver.

STEP 3

Attach Outer Shelf (B) to Inner Shelf (A) using Wing Nuts (S-A).

STEP 4

Remove adhesive backing from Thick Pads (H) and apply them to Inner and Outer Shelves (A,B).

STEP 5 (Option A)

Clamp Installation
Attach Clamps (E) to Left and Right Support Brackets (C,D) using M6x6mm Screws (S-C) and 4mm Allen Wrench (T-A), so that the clamps are offset towards the center of the mount. Attach the mount assembly to a desktop and adjust the width using Wing Nuts (S-A) and place PC into the mount.

STEP 5 (Option B)

Concrete/Brick Wall Installation
Hold the assembled mount to the wall and mark hole locations for drilling. Use of a level is highly recommended. Drill 1.8” (45mm) deep pilot holes using a 5/16” (8mm) drill bit. Press Concrete Anchors (W-B) into the wall and attach the mount using ST5.5x38mm Screws (W-A) and a Phillips screwdriver. Place PC in mount and hold Locking Bracket (F) to the wall directly above the PC. Mark hole locations and remove the PC from the mount. Drill 1.6” (40mm) deep pilot holes using a 5/16” (8mm) drill
bit. Place the PC back into the mount and install Locking Bracket (F) using Concrete Anchors (W-B), ST5.5x38mm Screws (W-A), and a Phillips screwdriver.

STEP 5 (Option C)

Wood Wall Installation
Hold the assembled mount to the wall and mark hole locations for drilling. Use of a level is highly recommended. Drill 1.6” (40mm) deep pilot holes using a 5/32” (4mm) drill bit. Attach the mount using ST5.5x38mm Screws (W-A) and a Phillips screwdriver. Place PC in mount and hold Locking Bracket (F) to the wall directly above the PC. Mark hole locations and remove the PC from the mount. Drill 1.6” (40mm) deep pilot holes using a 5/32” (4mm) drill bit. Place the PC back into the mount and install Locking Bracket (F) using ST5.5x38mm Screws (W-A) and a Phillips screwdriver.

STEP 5 (Option D)

Drywall Installation
WARNING: THIS INSTALLATION METHOD IS ONLY RATED FOR A 22LBS (10KG) MAX LOAD.
Hold the assembled mount to the wall and mark hole locations for drilling. Only mark the top hole on each support bracket. Use of a level is highly recommended. Drill completely through the drywall using a 25/64” (10mm) drill bit. Tap M6x60mm Molly Bolts (W-E) into the drilled holes until flush with the wall. Use a Phillips screwdriver to tighten the screw to expand the anchor in the wall. Tighten until the anchor feels snug and the bolt resists hand- tightening. Remove the bolt and washer from the installed anchor. Install the assembled mount to the anchors using the previously removed bolts and washers. Place PC in the mount and hold Locking Bracket (F) to the wall directly above the PC. Mark hole locations and remove the PC from the mount. Screw Self- Tapping Drywall Anchors (W-C) into the wall at marked locations using a Phillips Screwdriver until the head of the anchor is flush with the wall. Place the PC back into the mount and install Locking Bracket (F) using ST4.2x35mm Screws (W-D) and a Phillips screwdriver.

Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us

Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

309-278-5303 AVG. RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com Chat live with an agent! AVG. RESOLUTION TIME (within office hrs): < 15 M
help@vivo-us.com
AVG. RESPONSE TIME (within office hrs): 1HR 8M
23% within < 15m
38% within < 30m
61% within < 1hr
83% within < 2hr
92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
SKU: MOUNT-PC07G
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.
https://vivo-us.com/products/mount-pc07g
GET IN TOUCH | Monday-Friday from 7:00 am-7:00 pm CST

Documents / Resources

| V I V O MOUNT-PC07G Deskside and Wall Gaming PC Mount [pdf] Instruction Manual
MOUNT-PC07G Deskside and Wall Gaming PC Mount, MOUNT-PC07G, Deskside and Wall Gaming PC Mount, Wall Gaming PC Mount, Gaming PC Mount, PC Mount, Mount
---|---
| V I V O MOUNT-PC07G Deskside and Wall Gaming PC Mount [pdf] Instruction Manual
MOUNT-PC07G Deskside and Wall Gaming PC Mount, MOUNT-PC07G, Deskside and Wall Gaming PC Mount, Wall Gaming PC Mount, Gaming PC Mount, PC Mount, Mount, Deskside