THE HOME DEPOT MERRA 3 Light Vanity Light Instructions
- October 30, 2023
- THE HOME DEPOT
Table of Contents
THE HOME DEPOT MERRA 3 Light Vanity Light
Product Information
The product is a lamp fixture with a canopy that can accommodate three E26 bulbs (not included) rated up to 60W each. The fixture comes with a mounting bracket, canopy nuts, mounting bolts, wire nuts, and socket rings. It also includes shades and lamp holders.
Product Usage Instructions
- Prepare the wiring in your wall for the desired location of your new lamp. Prepare your junction box (not included).
- Unscrew the canopy nuts (F) and take the mounting bracket (A) off the canopy (E). Connect your mounting bracket to your junction box using the mounting bolts (C).
- Make electrical connections using the wire nuts (D).
- Place the canopy against the mounting bracket, ensuring that no wiring is left exposed. Secure it by replacing the canopy nuts onto the canopy bolts (B) and retightening them.
- Install the shades (H) onto the lamp holders (G). Secure them with the socket rings (I).
- Install your bulbs into the sockets.
If you have any questions or comments regarding the product usage, contact the manufacturer at help@cs-supportpro.com for assistance.
INSTRUCTIONS
WARNING!
- Read these instructions carefully prior to installation.
- Check for electric, gas, and plumbing lines before drilling or consult a professional.
- ALWAYS cut ALL relevant power before installing a lighting fixture, and do not restore power to the line until the lamp has been FULLY installed.
- DO NOT use with bulbs exceeding the recommended wattage.
ASSEMBLY
- Prepare the wiring in your wall for the desired location of your new lamp. Prepare your junction box (not included).
- Unscrew the canopy nuts (F) and take the mounting bracket (A) off the canopy (E). Connect your mounting bracket to your junction box using the mounting bolts (C).
- Make electrical connections using the wire nuts (D).
- Being careful that no wiring is left exposed, place the canopy against the mounting bracket and secure it by replacing the canopy nuts onto the canopy bolts (B) and retightening them.
- Install the shades (H) onto the lamp holders (G). Secure them with the socket rings (I).
- Install your bulbs into the sockets. This fixture has been rated for three E26 bulbs (not included) up to 60W each.
CONTACT US
- Thank you for choosing our products! If you have any questions or comments, contact us at help@cs-supportpro.com and we’ll resolve your issue ASAP!
- For a .pdf copy of the latest version of these instructions, use the appropriate app on your smartphone to scan the QR code to the right.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>