V I V O STAND-TV07A Dark Walnut Tabletop TV Stand Instruction Manual
- October 30, 2023
- V I V O
Table of Contents
V I V O STAND-TV07A Dark Walnut Tabletop TV Stand
Product Information
The Dark Walnut Tabletop TV Stand (SKU: STAND-TV07A) is a sturdy and stylish stand that securely holds flat and curved back TVs weighing up to 88lbs (40kg). The package includes a base, right and left foot, upper and lower VESA brackets, pads, round pads, screws, spacers, security cable, security clip, security bracket, clamp, washer, and Allen wrench. It comes with assembly instructions and warning labels for safety precautions.
Product Usage Instructions
Before using the Dark Walnut Tabletop TV Stand, ensure that you have all the hardware included in the package. Also, read and understand the warning labels for safety precautions. Tools required for assembly include a Phillips screwdriver, drill, tape measure, level, and pencil.
Assembly Steps
- Step 1: Assemble the right foot (B) and left foot (C) to the base (A) using M6x18mm screws (S-A) and a 4mm Allen wrench (T-A).
- Step 2: Remove adhesive backing from the pad (F) and round pads (G) and apply them to the right foot (B) and left foot (C).
- Step 3: Loosen the collar on the base (A) using the 4mm Allen wrench (T-A). Adjust the collar to the desired height, and tighten it with the 4mm Allen wrench (T-A). The recommended height for the collar is between 50-150mm (2-5.9) from the top of the base (A).
- Step 4: Remove the security screw (E1) from the lower VESA bracket (E) and open the clamp.
- Step 5: Choose either option A or B depending on your TV’s back type.
- Option A: For flat back monitor position, place VESA brackets horizontally on the back of the TV, making sure the upper VESA bracket (D) is on top and the lower VESA bracket (E) is below. Secure using screws (M-A or M-B) with square washers (M-F) and M5 washers (P-G) and security clips (P-B) installed to top holes.
- Option B: For the curved back monitor position, place VESA brackets horizontally on the back of the TV, making sure the upper VESA bracket (D) is on top and the lower VESA bracket (E) is below. Secure using screws (M-C, M-D, or M-E) with square washers (M-F) and spacers (M-G, M-H) with security clips (P-B) installed to top holes.
- Step 6: Slide the TV with VESA brackets (D, E) onto the base (A). Rest the upper VESA bracket (D) on the collar of the base (A). Close the clamp on the lower VESA bracket (E) over the pole and secure it with the previously removed security screw (E1). Using the 4mm Allen wrench (T-A), remove the cable management cover from the back of the base (A) and route cables.
- Step 7: For the wood stud wall, use the security bracket (P-C) as a guide and mark the drilling location on the wall at the same height as the upper VESA bracket (D). Use a stud finder to locate a wood stud and drill a hole at least 40mm (1.6) deep using a 3.5mm (1/8) drill bit.
Note:
Hardware included may not be used. Do not install into drywall alone. Verify
your wall construction and use wood studs to mount. If unsure, please contact
us at vivo-us.com, email at help@vivo-us.com, or
call us at 309-278-5303.
SKU: STAND-TV07A
Scan the QR code with your mobile device or follow the link for helpful
videos and specifications related to this product. https://vivo-
us.com/products/stand-tv07a.
GET IN TOUCH | Monday-Friday from 7:00 am-7:00 pm CST
- help@vivo-us.com
- www.vivo-us.com Chat live with an agent!
- 309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about
the safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual. Do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly or inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT
TIPOVER:
- NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV STAND.
- USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
PACKAGE CONTENTS
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS
REQUIRED.
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
TOOLS NEEDED
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD
STUDS TO MOUNT. We include mounting hardware for brick and concrete walls. If
unsure, please contact us at vivo-us.com, email at help@vivo-
us.com, or call us at 309-278-5303.
ASSEMBLY STEPS
STEP 1
Assemble Right Foot (B) and Left Foot (C) to Base (A) using M6x18mm Screws
(S-A) and 4mm Allen Wrench (T-A).
STEP 2
Remove adhesive backing from Pad (F) and Round Pads (G) and appply them to
Right Foot (B) and Left Foot (C).
STEP 3
Loosen the collar on Base (A) using 4mm Allen Wrench (T-A). Adjust the collar
to the desired height, and tighten with 4mm Allen Wrench (T-A).
STEP 4
Remove the Security Screw (E1) from Lower VESA Bracket (E) and open the clamp.
STEP 5
OPTION A: Flat Back Monitor
Position VESA brackets horizontally on the back of the TV, making sure Upper
VESA Bracket (D) is on top and Lower VESA Bracket (E) is below. Secure using
screws (M-A or M-B) with Square Washers (M-F) and M5 Washers (P-G) and
Security Clips (P-B) installed to top holes.
OPTION B: Curved Back Monitor
Position VESA brackets horizontally on the back of the TV, making sure Upper
VESA Bracket (D) is on top and Lower VESA Bracket (E) is below. Secure using
screws (M-C, M-D or M-E) with Square Washers (M-F) and Spacers (M-G, M-H) with
Security Clips (P-B) installed to top holes.
STEP 6
Slide the TV with VESA Brackets (D, E) onto Base (A). Rest Upper VESA Bracket
(D) on the collar of Base (A). Close the clamp on Lower VESA Bracket (E) over
the pole and secure with the previously removed Security Screw (E1). Using 4mm
Allen Wrench (T-A), remove the cable management cover from the back of Base
(A) and route cables.
STEP 7 (Option A)
Wood Stud Wall
Using Security Bracket (P-C) as a guide, mark the drilling location on the
wall at the same height as the Upper VESA Bracket (D). The use of a stud
finder is recommended. Drill the hole at least 40mm (1.6”) deep using a 3.5mm
(1/8”) drill bit.
Wood Stud Wall
Mount Security Bracket (P-C) to the wall usinig ST4.8x38mm Screw (P-E).
STEP 7 (Option B)
Concrete/Brick Wall
Using Security Bracket (P-C) as a guide, mark the drilling location on the
wall at the same height as Upper VESA Bracket (D). Drill the hole at least
40mm (1.6”) deep using a 7mm (9/32”) drill bit. Mount Security Bracket (P-C)
to the wall using Anchor (P-F) and ST4.8x38mm Screw (P-E).
STEP 8
Thread Security Cable (P-A) through Security Clips (P-B) on the TV and the
center hole in Security Bracket (P-C) as shown, then tighten Security Cable
Clamps (P-D) using a Phillips screwdriver.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
Open Monday – Friday 7:00 am – 7:00 pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
- 309-278-5303 AVG. RESOLUTION TIME (within office hrs): 5M 4S
- www.vivo-us.com Chat live with an agent! AVG. RESOLUTION TIME (within office hrs): < 15 M
- help@vivo-us.com
- AVG. RESPONSE TIME (within office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com.
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Dark Walnut 49" to 70" Tabletop TV Stand – VIVO - desk solutions, screen mounting, and more