etac 75307 Prio 3D Angle Reducer Back Support Tilt Angle Instructions
- October 30, 2023
- Etac
Table of Contents
etac 75307 Prio 3D Angle Reducer Back Support Tilt Angle
Product Information
This product comes with an assembly instruction manual with the code 75307.2 and the date of the manual is August 23, 2022. The product has a quantity of 10 pieces.
Product Usage Instructions
- Start by carefully reading through the assembly instructions provided in the manual.
- Ensure that you have all the necessary tools required for the assembly process.
- Take one piece of the product and align it with the other piece, making sure that they fit together perfectly.
- Once the pieces are aligned, press down firmly until you hear a “click” sound. This indicates that the pieces are securely connected.
- Repeat steps 3 and 4 for all remaining pieces until the entire product is assembled.
- After assembly, double-check that all pieces are securely connected and that there are no loose parts.
Note : If you encounter any difficulties during the assembly process or have any questions, please refer to the assembly instructions manual or contact our customer service for assistance.
PARTS
Assembly instructions
28163
Etac Supply Center AB Långgatan 12 SE-334 33 Anderstorp
www.etac.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>