glitzhome 2023300038 Metal Cutout Flower Solar Powered Outdoor Hanging Lantern Instruction Manual
- October 30, 2023
- glitzhome
Table of Contents
- glitzhome 2023300038 Metal Cutout Flower Solar Powered Outdoor Hanging
- Product Information
- ASSEMBLY INSTRUCTION
- HOW THE SOLAR LIGHT WORKS
- CHOOSE AN IDEAL LOCATION
- ATTENTION FOR FIRST TIME USE
- PRECAUTIONS
- REPLACE BATTERIES
- ASSEMBLY
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
glitzhome 2023300038 Metal Cutout Flower Solar Powered Outdoor Hanging
Lantern
Product Information
The product is a solar light that works by converting solar power into energy during the day and using that energy to turn on automatically at night. The duration of illumination depends on geographical location, weather conditions, and seasonal light availability. The solar light comes with a rechargeable battery, and the package also includes assembly instructions and precautions for usage.
ASSEMBLY INSTRUCTION
Carefully unpack and identify each component before begining assembly. Before you begin, please refer to part list to make sure that you have all parts. Please take care when assembling the unit and always place the parts on a clean, soft surface. If you require assistance with assembly or parts, please call 888-357-7263.
HOW THE SOLAR LIGHT WORKS
During the day, the solar panel converts solar power into energy and stores it in the rechargeable battery. At night, the light turns on automatically and using the energy stored. The duration of the illumination will depend on your geographical location, weather conditions and seasonal light availability.
CHOOSE AN IDEAL LOCATION
Choose an outdoor location where the solar panel can receive at least 8 hours of full and direct sunlight each day. Shaded locations will reduce the battery charge and shorten the illumination time at night. Avoid placing solar lights near bright light sources, such as street lights. The bright light sources may cause the solar light to turn off automatically. Solar lights are ideal for night time lighting in the garden, lawn, etc. You can also place the solar lights outdoor during the day and then place them indoors for lighting.
ATTENTION FOR FIRST TIME USE
Turn the ON/OFF switch to the “ON” position, the light sensor will control the lighting automatically. When the environment turns dark, the solar light will turn on and use the energy stored in the battery. If turn the switch to the “OFF” position, it will turn off to save energy. If the solar light does not turn on automatically at night after 8 hours of charging during the day, please check the following:
- Make sure the power switch is at the “ON” position.
- Check the battery and make sure the battery contacts the terminals securely.
- Make sure the solar light is located in a sunny location and the solar panel can receive direct sunlight.
PRECAUTIONS
- Please note the solar light is designed to work when the environment gets dark. If there are strong light sources nearby, the solar light may illuminate dimly or not light up at all.
- Although the battery has been charged by the manufacturer, the electric charge may have dropped by the time consumer receives the product. Please let the solar light charge for a full day for the maximum performance.
- Surface of the solar panel must be kept clean. Dusty surface will reduce charging efficiency.
REPLACE BATTERIES
1pc 1.2V AA 600MAH Ni-MH rechargeable battery included, same equivalent type as recommended must be used.
- Unscrew the battery compartment cover by using a Phillips head screwdriver (not included).The battery compartment is located underneath the solar panel.
- Remove the exhausted battery and install 1pc new AA rechargeable battery according to the +/- polarity. Open the compartment carefully and ensure that welding wires inside the battery terminals are not damaged.
- Replace battery compartment cover, screw it back into position and make sure is properly sealed.
WARNING
- Keep batteries away from children. This product is not a toy.
- Ensure battery contacts are clean and free of debris.
- Install batteries according to correct polarity (+/-).
- Remove batteries when consumed or when product is not in use for an extended period of time.
- Contains Ni-MH battery. Batteries must be recycled or disposed of properly, in accordance with all state and local regulations. DO NOT crush, puncture, or incinerate.
ASSEMBLY
SAVE THESE INSTRUCTIONS – THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR POWER UNITS.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>