glitzhome 2037800002 8.5-ft Copper Umbrella Rain Chains Instruction Manual
- October 30, 2023
- glitzhome
Table of Contents
2037800002 8.5-ft Copper Umbrella Rain Chains
Product Information
- Product Name: 8.5FT Rain Chain
- Components:
- 8.5ft Rain Chain (A)
- Gutter Clip (B)
The rain chain is designed to be an alternative to traditional downspouts, allowing rainwater to flow down a decorative chain into a landscaped area or rain barrel, rather than being directed into a drain or foundation. The product comes with a gutter clip, which allows the user to easily attach the rain chain to the gutter drain hole. The length of the connector chain can be adjusted to suit the user’s preference.
Product Usage Instructions
- Carefully unpack and identify each component before beginning assembly.
- Refer to the parts list to ensure that all parts are present.
- Choose a location where rain chains can lead to landscaped areas or a rain barrel, and where overflow can be diverted from foundations.
- Unhook the V-shaped Gutter Clip (B) from the Rain Chain (A).
- Slide the Gutter Clip (B) into the rain gutter drain hole.
- Hook Rain Chain (B) onto Gutter Clip (A).
- Note: Use a filter screen to prevent leaves and debris from dropping into your rain chain if needed.
- You can adjust the length of the connector chain to suit your preference. Carefully open chain links by hand or with pliers. Remove or add chains as needed. Make sure to close the chains tightly.
- Wait for rain and enjoy!
If you require assistance with assembly or parts, please call 888-357-7263.
ASSEMBLY INSTRUCTION
8.5FT RAIN CHAIN
Please carefully unpack and identify each component before beginning assembly. Before you begin, please refer to parts list to make sure that you have all parts. Please take care when assembling the unit and always place the parts on a clean, soft surface. If you require assistance with assembly or parts, please call 888-357-7263.
PRE-ASSEMBLY PREPARATION
- Please read through this instruction before beginning assembly.
- Installation may require some slight bending of gutter clip that can be easily done by hand or with pliers.
- Please check for any loose links or chains and tighten them before use.
PARTS LIST
IT’S BEST TO CHOOSE A LOCATION WHERE RAIN CHAINS CAN LEAD TO LANDSCAPED AREAS, RAIN BARREL AND WHERE OVERFLOW CAN BE DIVERTED FROM FOUNDATIONS.
STEP 1
Unhook the V-shaped Gutter Clip (B) from the Rain Chain (A).
STEP 2
Slide the Gutter Clip (B) into the rain gutter drain hole.
STEP 3
Hook Rain Chain (B) onto Gutter Clip (A). Wait for rain and enjoy!
Note: Use a filter screen to prevent leaves and debris from dropping into
your rain chain if needed. 
STEP 4
You can adjust the length of the connector chain to suit your preference.
- Carefully open chain links by hand or with pliers.
- Remove or add chains as needed.|
- Make sure to close the chains tightly.
Glitzhome ,LLC.
Toll free 888-357-7263
[email protected]