glitzhome 2037800001 8.5FT Rain Chain Instruction Manual
- October 30, 2023
- glitzhome
Table of Contents
glitzhome 2037800001 8.5FT Rain Chain
Product Information
8.5ft Rain Chain
The 8.5ft Rain Chain is a decorative alternative to traditional downspouts. It is designed to direct rainwater from your gutters into a landscaped area, rain barrel or other suitable location, while adding an elegant touch to your home’s exterior.
Product Parts List
- 8.5ft Rain Chain (A)
- Gutter Clip (B) – Qty: 1
Product Usage Instructions
- Before beginning assembly, carefully unpack and identify each component, and refer to the parts list to ensure that you have all parts.
- Choose a location where rain chains can lead to landscaped areas, rain barrels, and where overflow can be diverted from foundations.
- Unhook the V-shaped Gutter Clip (B) from the Rain Chain (A).
- Slide the Gutter Clip (B) into the rain gutter drain hole.
- Hook the Rain Chain (A) onto the Gutter Clip (B).
- Note: Use a filter screen to prevent leaves and debris from dropping into your rain chain if needed.
- You can adjust the length of the connector chain to suit your preference. Carefully open chain links by hand or with pliers. Remove or add chains as needed. Make sure to close the chains tightly.
- Wait for rain and enjoy!
If you require assistance with assembly or parts, please call 888-357-7263. Also, feel free to get social with us and discover more about our products, tips, and exclusive discounts!
Please carefully unpack and identify each component before beginning assembly. Before you begin, please refer to parts list to make sure that you have all parts. Please take care when assembling the unit and always place the parts on a clean, soft surface. If you require assistance with assembly or parts, please call 888-357-7263.
PRE-ASSEMBLY PREPARATION
- Please read through this instruction before beginning assembly.
- Installation may require some slight bending of gutter clip that can be easily done by hand or with pliers.
- Please check for any loose links or chains and tighten them before use.
PARTS LIST
ASSEMBLY INSTRUCTION
IT’S BEST TO CHOOSE A LOCATION WHERE RAIN CHAINS CAN LEAD TO LANDSCAPED AREAS, RAIN BARREL AND WHERE OVERFLOW CAN BE DIVERTED FROM FOUNDATIONS.
- STEP 1
- Unhook the V-shaped Gutter Clip (B) from the Rain Chain (A).
- STEP 2
- Slide the Gutter Clip (B) into the rain gutter drain hole.
- STEP 3
- Hook Rain Chain (B) onto Gutter Clip (A). Wait for rain and enjoy!
- Note: Use a filter screen to prevent leaves and debris from dropping into your rain chain if needed.
- STEP 4: You can adjust the length of the connector chain to suit your preference.
1. Carefully open chain links by hand or with pliers.
2. Remove or add chains as needed.
3. Make sure to close the chains tightly.CONTACT
Glitzhome ,LLC.
- Toll free: 888-357-7263
- [email protected]
Get social with us and discover more about our products, tips and exclusive discounts!