NATIONAL INSTRUMENTS VirtualBench Rack Mount Kit Installation Guide
- October 30, 2023
- NATIONAL INSTRUMENTS
Table of Contents
INSTALLATION GUIDE
VirtualBench™ Rack Mount Kit
VirtualBench Rack Mount Kit
COMPREHENSIVE SERVICES
We offer competitive repair and calibration services, as well as easily
accessible documentation and free downloadable resources.
SELL YOUR SURPLUS
We buy new, used, decommissioned, and surplus parts from every NI series. We
work out the best solution to suit your individual needs. Sell For Cash Get
Credit Receive a Trade-In Deal
OBSOLETE NI HARDWARE IN STOCK & READY TO SHIP
We stock New, New Surplus, Refurbished, and Reconditioned NI Hardware. VB8012
Request a Quote CLICK HERE
The National Instruments VirtualBench Rack Mount Kit (part number 785079-01)
is an accessory you can use to mount your VirtualBench to a rack. The rack
mount kit consists of a shelf, two 6-32 screws, and this guide.
Complete the following steps to install the rack mount kit on your
VirtualBench. You need a #2 Phillips screwdriver to complete the installation.
-
Use the screwdriver to remove two feet from your VirtualBench. Depending on your VirtualBench, you must remove different feet. Figure 1 depicts the correct feet to remove for every VirtualBench model.
Figure 1. Removing Feet from VirtualBench1 VirtualBench with Round Rubber Feet| 2 VirtualBench with Plastic Flip Feet
- Lay the shelf on the inverted VirtualBench, aligning the two remaining feet with the recesses of the shelf, as shown in Figure 2.
-
Use the screwdriver and the screws from the removed feet to attach VirtualBench to the shelf, screwing through the bottom of the shelf into the foot recess of the VirtualBench.
Figure 2. Attaching the Shelf to VirtualBench****1 VirtualBench with Round Rubber Feet| 2 VirtualBench with Plastic Flip Feet
- Store the removed feet on the shelf with the provided screws, as shown in Figure 3.
Figure 3. Storing Your Feet
1 Round Rubber Feet| 2 Plastic Flip Feet
5. Attach the shelf to your rack. Larger Virtual Benches, such as the VB-8034, require an extra rack unit (1U) above the mounting flanges.
Note Rack environments often can exceed the VirtualBench rated ambient
temperature. Monitor the inlet air temperature of VirtualBench in the deployed
environment to ensure that the maximum ambient operating temperature, listed
in your VirtualBench specifications document, is not breached.
Refer to the NI Trademarks and Logo Guidelines at
ni.com/trademarks for more information on NI
trademarks. Other product and company names mentioned herein are trademarks or
trade names of their respective companies. For patents covering NI
products/technology, refer to the appropriate location: Help»Patents in your
software, the patents.txt file on your media, or the
National Instruments Patents Notice at
ni.com/patents. You can find information about end-
user license agreements (EULAs) and third-party legal notices in the readme
file for your NI product. Refer to the Export Compliance Information at
ni.com/legal/export-compliance for
the NI global trade compliance policy and how to obtain relevant HTS codes,
ECCNs, and other import/export data. NI MAKES NO EXPRESS OR IMPLIED WARRANTIES
AS TO THE ACCURACY OF THE INFORMATION CONTAINED HEREIN AND SHALL NOT BE LIABLE
FOR ANY ERRORS. U.S. Government Customers: The data contained in this manual
was developed at private expense and is subject to the applicable limited
rights and restricted data rights as set forth in FAR 52.227-14, DFAR
252.227-7014, and DFAR 252.227-7015.
© 2016 National Instruments. All rights reserved. 376293A-01
Bridging the gap between the manufacturer and your legacy test system.
1-800-915-6216 S.’
****www.apexwaves.com
sales@apexwaves.com
All trademarks, brands, and brand names ore the property of their respective
owners
References
- Trade Compliance - NI
- National Instruments Patents - NI
- NI Trademarks and Logo Guidelines - NI
- VB-8012 National Instruments VirtualBench All-in-One Instrument | Apex Waves
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>