THE HOME DEPOT MVSR33 Wall Mount Bath Hardware Set Instruction Manual

THE HOME DEPOT MVSR33 Wall Mount Bath Hardware Set

Product Information

The product is a set of bathroom hardware which includes a Towel Ring, Paper Holder, Robe Hook, 18 Towel Bar and 24 Towel Bar. The package comes with the necessary hardware for installation. The product has a durable finish that can be cleaned with a damp cloth and a soft towel.

Product Usage Instructions

1. Check the diagram and parts list to ensure all necessary parts are present before beginning installation. If any part is missing or damaged, please contact HomLux Customer Service.
2. Read through all instructions before beginning installation.
3. Identify the four hole locations on the template for your item and place tape on all four corners of the template.
4. Position the template on the wall in the desired location, ensuring it is level, then tape it to the wall.
5. Mark the hole locations and check to make sure marks are on the wall. Remove the template from the wall.
6. Use a Phillips head screwdriver to fasten anchor (a) into drywall. Some force may be needed to push anchor tip into drywall. Turn/rotate anchor clockwise into the wall until the top of the anchor is flat against the wall.
7. Place the mounting bracket (c) (facing outward) on the wall. Insert screws into bracket slots and anchors. Turn and rotate screws (b) through the bracket into anchors clockwise. Repeat for the remaining bracket and screws. Slots in bracket allow for adjustment.
8. Use a hex wrench (e) to loosen set screw (d) in both posts.
9. Place one post over the mounting bracket with the set screw facing downward. The post must hook over the mounting bracket. Use a hex wrench to hand tighten set screw.
10. Assemble the product as shown. The post must hook over the mounting bracket. It is not necessary to assemble a spring-loaded toilet paper holder before mounting posts on the wall. Place the remaining post over the mounting bracket with the set screw facing downward. Use an Allen wrench to hand tighten set screw.

Product Specifications

Towel Ring

• Size: 18 inches / 457.2 mm
• Dimensions: 167.59 mm x 3.2 80 mm x 2.8 70 mm x 0.4 9.5 mm x 2.2 55 mm x 2.2 55 mm x 1.1 27.5 mm

Paper Holder

• Dimensions: 3.2 80 mm x 2.2 55 mm

Robe Hook

• Dimensions: 3.2 80 mm x 2.8 70 mm x 0.63 16 mm x 2.2 55 mm x 5.2 133 mm x 2.8 70 mm x 2.2 55 mm

18 Towel Bar

• Size: 18 inches / 457.2 mm
• Dimensions: 2.6 65 mm x 24 609.6 mm x 27 68.3 mm x 2.2 56.5 mm x 0.5 12 mm x 2.6 65 mm

24 Towel Bar

• Size: 24 inches / 609.6 mm b3.2 80 mm x 2.8 70 mm x 2.2 55 mm x 2.2 55 mm

Tools

HARDWARE INCLUDED

TOOL REQUIRED (NOT INCLUDED)

NOTE: Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact HomLux Customer Service

INSTALLATION INSTRUCTIONS

STEP 1

1. Identify the four hole locations on template for your item.
2. Place tape on all four corners of the template.
3. Position template on wall in desired location making sure that it is level, then tape to the wall.
4. Mark hole locations and check to make sure marks are on wall. Remove template from wall.

STEP 2

1. Use Phillips head screw driver to fasten anchor(a) into drywall.
   • NOTE: Some force may be needed to push anchor tip into drywall.
2. Turn/rotate anchor clockwise into wall until the top of the anchor is flat against wall.

STEP 3

1. Place the mounting bracket(c) (facing outward) on the wall.
2. Insert screws into bracket slots andanchors.
3. Turn and rotate screws(b) through bracket into anchors clockwise. Repeat for remaining bracket and screws.

NOTE: Slots in bracket allow for adjustment.

STEP 4

• Use hex wrench(e) to loosen set screw(d) in both posts.

STEP 5

1. Place one post over the mounting bracket with the set screw facing downward. The post must hook over the mounting bracket.
2. Use hex wrench to hand tighten set screw.

STEP 6

1. Assemble product(as shown).The post must hook over the mounting bracket.
   • NOTE: It is not necessary to assemble a spring loaded toilet paper holder before mounting posts on wall. Place remaining post over the mounting bracket with the set screw facing downward.
2. Use Allen wrench to hand tighten set screw.

CARE INSTRUCTIONS

• Care should be given to the cleaning of this product.
• Although its finish is extremely durable, it can be damaged by harsh abrasives or polish.
• To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.

SPECIFICATIONS

Item

• 0764004646
• 975D004935
• 63B7004936

24″ Towel Bar

18″ Towel Bar/Paper Holder

Towel Ring

Robe Hook

Item

• 0657004937
• EB18004938
• AD5A00464A

24″ Towel Bar

18″ Towel Bar/Paper Holder

Towel Ring

Robe Hook

Item

• 005C004939
• A1AE00493A
• 521800493B

24″ Towel Bar

18″ Towel Bar

Paper Holder

Towel Ring

Robe Hook

Documents / Resources

| THE HOME DEPOT MVSR33 Wall Mount Bath Hardware Set [pdf] Instruction Manual
MVSR33 Wall Mount Bath Hardware Set, MVSR33, Wall Mount Bath Hardware Set, Mount Bath Hardware Set, Bath Hardware Set, Hardware Set, Set
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>