BOCCI 57.26 Twenty-six 57 Pendants Hung Light Instruction Manual
- June 4, 2024
- BOCCI
Table of Contents
BOCCI 57.26 Twenty-six 57 Pendants Hung Light
DESCRIPTION
57.26 is a random confi guration of twenty-six 57 pendants hung from a round
canopy. The drop lengths of the pendants are randomized between a client
specifi ed range of heights to variously cluster and scatter. The result is an
ambient installation or fi eld of light.
57 is an exploration of a technique used for producing closed cell foam. The
process involves trapping voids of air of different sizes and confi gurations
within a glass matrix, yielding a shape loosely referencing a rain cloud.
These pockets of air remain invisible when the piece is off, but come alive to
reveal an interior universe when the piece is illuminated. By virtue of the
fabrication process, each piece is completely unique.
NOTES
- Purchase replacement lamps online at www.bocci.com/shop/bulbs
- As an alternative to a built-in power supply, Bocci recommends mounting power supplies remotely in an easily accessible and hidden location for ease of long-term maintenance.
introduction
-
Note: All connections and power supplies are tested by our technicians before shipping. However, it is possible for ports/power supplies to come loose or damage during shipping.
Test each port before installing canopy to ceiling to catch any loose connections or faulty power supplies.
Measure and mark the light fixture canopy position on the ceiling -
Note: The client is responsible for providing a robust 16mm (5/8”) plywood backing or wood blocking to securely anchor to the structural substrate.
Connections from the plywood to the structural substrate are the client’s responsibility.
Measure the plywood so that it fi ts within the canopy side walls (refer to detail above).
Anchor the plywood backing to the structural ceiling substrate. -
Connect power supplies to line voltage.
LED: connect the black wire to black and white wire to white wire.
For the ground connection, connect the green wire with yellow stripe to the bare copper wire or green wire in the junction box.
Note: Bocci strongly recommends mounting power supplies remotely in a close, accessible and hidden location for ease of long term maintenance. Installation to be done by certifi ed personnel to ensure compliance with the code. -
Anchor canopy into the plywood backing using the fasteners provided.
Turn power to fi xture on.
Very carefully uncoil the braided coaxial cable in a spool like manner. Insert your index fi ngers into opposite sides of the roll then rotate your fi ngers around each other to unroll the coaxial cable.
Use patience: allow the cable to uncoil completely to avoid kinks. -
Attach lamp to the lamp holder.
-
Slide the brass cap onto the coaxial cable.
-
Each pendant terminates in a ‘headphone jack type ConnectOr, which plugs into a receiving receptacle in the canopy. Clients are encouraged to compose their Own pendant configuration on site, thus creating a truly unique fixture. After plugging in each pendant, turn the threaded sheath into place by hand ensuring that it is adequately tightened. Tools are not required Check that each lamp is working properly as you go along by keeping power to the fixture on and lamps plugged in
-
Insert the lamp assembly into the glass pendant.
-
Thread the brass cap onto the pendant.
-
Slide the coax cable through the slot on the pendant holder
-
Thread glass cap onto the pendant, ensuring that the coax remains seated in the slot.
-
Clean fi ngerprints from surfaces
For additional assistance,
please contact Bocci:
Vancouver
sales@bocci.com
www.bocci.com
Berlin
europe@bocci.com
www.bocci.com
US Patent # D796732
EU Design Patent # 002268581-0001 to
0006
Made in Vancouver Canada