StarTech com CABSHELF1U2 1U 7 Inch Depth Rack Mount Shelf User Guide
- October 30, 2023
- StarTech com
Table of Contents
1U 7in Depth Rack Mount Shelf – 33lbs / 15kg
Product Diagram
CABSHELF1U and CABSHELF1U2
| Component| Function
---|---|---
1| Front Mounting Brackets| • Used to fasten the Shelf to the Mounting Posts
of the rack
2| Shelf Surface| • Mount Server Rack Equipment
3| Rear Lip| • Help prevent the Server Rack Equipment from falling off the
Shelf
Package Contents
- 1U Rack Shelf x 1
- M6 Screws x 4
- M6 Square Cage Nuts x 4
- M6 Plastic Washers x 4
- Quick-Start Guide x 1
Requirements
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and
more, visit www.startech.com/support.
For the latest manuals, product information, technical specifications, and
declarations of conformance, please visit:
www.StarTech.com/CABSHELF1U
www.StarTech.com/CABSHELF1U2
- Refer to the manufacturer of the rack to determine the mounting hole type and size
- Phillips head screwdriver
- Cage nut tool (Optional)
Warnings!
Read the entire Quick-Start Guide and ensure the instructions are fully
understood before using this product.
Before adding equipment to this product, ensure this product has been properly
mounted.
Never operate this product if parts are missing or damaged.
Ensure the weight of the equipment does not exceed the weight capacity of this
product. If the weight capacity is exceeded, personal injury or damage to the
equipment is possible. This product can support the following weight: 33 lb
(15 kg).
Installation
-
Find a suitable location on the rack to mount the Shelf. The Shelf requires 1U of Mounting Space.
-
Install the M6 Cage Nuts into the Mounting Holes on the Mounting Posts of the rack. If available, use a Cage Nut Tool or your preferred installation method to install the Cage Nuts.
If the rack has M6 mounting threaded holes, skip this step as the M6 screws can be used directly -
Place the Shelf onto the rack and Align the Mounting Holes of the Front Posts with the Mounting Holes of the Front Mounting Brackets.
-
Use a Phillips Head Screwdriver to install the M6 Screws and fasten the Front Mounting Brackets to the Front Posts of the rack. Ensure the M6 Screws are properly tightened, and the Shelf is secure before attempting to mount the Server Rack Equipment.
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Regulatory Compliance
Use of Trademarks, Registered Trademarks, and other Protected Names and
Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of thirdparty companies not related in any way
to StarTech.com. Where they occur these references are for illustrative
purposes only and do not represent an endorsement of a product or service by
StarTech.com, or an endorsement of the product(s) to which this manual applies
by the third-party company in question.
StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names
and/or symbols contained in this manual and related documents are the
property of their respective holders. PHILLIPS® is a registered trademark of
Phillips Screw Company in the United States or other countries.
Warranty Information
This product is backed by a lifetime warranty.
For further information on product warranty terms and conditions, please refer
to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
StarTech.com Ltd.
45 Artisans Crescent
London, Ontario
N5V 5E9
Canada| StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.| StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Road
Brackmills,
Northampton
NN4 7BW
United Kingdom| StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands
---|---|---|---
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
References
- StarTech.com | IT Pro's Trusted Source for Connectivity Accessories
- Unsere Produkte dienen IT- und A/V-Profis zum Verbinden, Konvertieren, Erweitern, Splitten und Switchen | Deutschland
- StarTech.com diseña y fabrica una variada gama de componentes para ordenadores, cables, conmutadores KVM, racks para... | España
- StarTech.com conçoit et fabrique une vaste sélection de pièces d’ordinateur, de câbles, de commutateur KVM, de racks... | France
- Pezzi per computer, cavi, switch KVM, server rack e soluzioni per reti | Italia
- 当社は、接続、変換、拡張、分離、切換えを行うIT & A / Vプロフェッショナルのためのパーツを製造しています | 日本
- StarTech.com ontwerpt en produceert een enorme selectie computeronderdelen, kabels, KVM-switches, serverracks en... | Nederland
- 1U 7in Depth Fixed Rack Mount Shelf - Rack Shelves | Server Rack Accessories | StarTech.com
- StarTech.com Support
- StarTech.com Warranty Policy