THE HOME DEPOT CA2253-W Light Polished Nickel Vanity Light Instruction Manual
- October 30, 2023
- THE HOME DEPOT
Table of Contents
THE HOME DEPOT CA2253-W Light Polished Nickel Vanity Light
WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
NOTES:
- Before installing, consult local electrical codes for wiring and grounding requirements.
- READ AND SAVE THESE INSTRUCTIONS
ASSEMBLY AND INSTALLATION INSTRUCTIONS
- Attach the mounting plate to the outlet box by using two mounting screws.
- Pul I out the wires and grounding wire from the outlet box. Make wire connections using the wire nuts, as follows:
- Connect the hot wire(usually black insulation)from the fixture to the black wire from the power source.
- Connect the neutral wire(usually white insulation)from the fixture to the white wire from the power source.
- Attach the fixture grounding wire(usually green insulation or bare wire)to the mounting strap with the green grounding screw. Then connect it to the house grounding wire with the wire nut. Carefully put the wires back into the outlet box.
- Attach the back plate to the mounting plate by inserting the screws. then secure it with two nuts.
CAUTION : With silicone caulking compound, caulk completely around where
the back plate meets with the wall surface to prevent water from seeping into
the outlet box.
Turn on the power at fuse or circuit box.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>