ZEBRONICS ZEB-Pixaplay 21 LED Projector User Manual

ZEBRONICS ZEB-Pixaplay 21 LED Projector

Product Information

The ZEB-Pixaplay 21 LED projector is a home theatre projector suitable for movies, TV, gaming, and more. It comes with various features including HDMI, VGA, AV IN, AUX OUT, USB x 2, built-in speaker, wide compatibility, ceiling mountable, remote control, and Dolby Audio support.

Dear Customer,
Thank you for purchasing the ZEB-Pixaplay 21 LED projector. Please read the user manual carefully before usage and save it for future reference.

Note:

• To provide a stable power supply, kindly use the cable provided with the product and connect to a AC 100-240V, 50/60Hz power source.
• Avoid the self-disassembly of the product as it results in voiding the product’s warranty.
• Avoid looking directly at the projector lens while it is active.
• Make sure that the projector’s air vents are not blocked while in use. The device must be kept in a well ventilated surrounding for proper functioning.
• It is recommended to turn OFF the projector after a continuous usage of maximum 6 hours.
• Place the projector away from water or other liquids. Avoid water accumulation and ensure good ventilation.
• In case of enquiry regarding the projector, email us at enquiry@zebronics.com or contact us at 044 4000 0004.
• To know more about Terms and conditions for warranty policy, please visit https://zebronics.com/pages/warranty-policy 

Features

• Home Theatre Projectors for Movies, TV & Gaming etc.
• Projector comes with HDMI, VGA ,AV IN, AUX OUT, USB x 2
• Built in Speaker
• Wide Compatibility
• Ceiling Mountable
• Remote Control
• Dolby Audio

Specification

• Screen size: 111 cm – 508 cm
• Native Resolution: 1280 x 720P
• Max. Supported Resolution: 1920 x 1080P (Max)
• Display Technology: LED
• Lifespan: 30,000H
• Brightness: 3000 lumens
• Contrast ratio: 1000:1
• Projection Distance: 1.5m – 5.6m
• Port Interface: HDMI, VGA ,AV IN, AUX OUT,USB x 2
• Video file format: AVI, MP4, MPG, MPEG1, MPEG2, MKV, MOV, FLV, H.264
• Input Voltage: AC 100-240V, 50/60Hz

Package Contents

• Projector: 1 U
• Remote Control: 1 U
• Power Cord: 1 U
• AV cable: 1 U
• HDMI Cable: 1 U
• QR Code Guide: 1 U
• Cotton Swab Pack: 1 U

Product Description

Remote Control

*NOTE :

1. To avoid power shortage, do not mix and use the old and new batteries.
2. To avoid battery leakage corrosion, if the remote controller is not used for a long time, please take the battery out.

Setting Up the Projector

• Power cord setup:
  Plug-in the power cord into the socket as described in the image below:

• Power on/Power off
  Press power button on the projector or on the remote to switch the power On/Off.

• Boot Up
  After turning on, the projector boots up within a few seconds and displays the multimedia input screen.

Focus and Keystone correction

• Keystone
  If the projector displays the image that is wider in the top and narrow in the bottom or vice versa, then use the keystone adjuster to correct the image to have an even top and bottom edges.

• Image focus
  Use the focus adjuster (refer to the product image) to adjust the focus of the projector until the picture displayed on the screen is in good clarity .

Projector Connection

Multi-Media Connection

Insert the USB into the respective ports, (refer picture below) Choose multimedia as signal source

Choose the content which you need to display

Movie, Music, Picture, Text.

Choose the file which you want to play and press the play/pause key to open the file and display the content.

• AV Video Equipment Connect
  Connect 3 in 1 RCA cable projector to AV slot (as shown in the image below) choose the signal source video.

• HDMI Equipment Connect
  HDMI of the projector can be connected to computer/ DVD player/ and all similar devices that can provide signal via HDMI port.

• 3.5mm Audio Device Connect
  The audio output of the projector can be dedicatedly given to any speaker or headphone that supports the 3.5mm AUX mode connection.

Menu Guides

• Remote control:
  Press “ “ key, then the main menu will appear. Use navigation keys of the remote to access the following sub menus

• Image Menu:
  This menu lists the following sub menus like Picture mode (Standard, Soft, User, Dynamic), color temperature (cool, Medium, Warm, User), Aspect Ratio (Auto, 4:3, 16:9) Noise reduction (Default, Low, Middle, High, Off).

• Audio Menu:
  In this audio settings sub menu, you could set the balance (-50 to 50), Auto volume (Off/On) , Surround Sound (Off, SRS, Surround)

• Time Menu:
  In this submenu settings, You can set the clock, OFF time, ON time, Sleep time, Auto sleep.

• Other settings menu:
  This Menu provides lists projector’s Color Range, OSD Duration, OSD Language, Factory Reset and Software Update menus

Projector distance & size

ISO 9001:2015 Certified Company
www.zebronics.com

References

• Indian Soundbars, Speaker, Headphone, Laptops, PC & Gaming Peripherals

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>