VEVOR NS401-S Screen Printing Machine User Manual
- October 30, 2023
- VEVOR
Table of Contents
VEVOR NS401-S Screen Printing Machine
Product Information
The Screen Printing Machine NS401-S is a tool designed to help with screen printing. This machine comes with a base, table support bar, positioning seat, support arm base, screen clamp, and various bolts, nuts, and screws to assemble the machine. The machine is designed for safety and has several precautions and warnings that should be followed to avoid accidents.
Product Usage Instructions
- Start by taking out the base (1) and placing it on the table. Then, take out the table support bar (3) and put it on the base (1). Lock it with square neck bolt (16), gasket M10 (17), and external hexagon nut M10 (18) using locking tool wrench 17-17(I).
- Put the positioning seat (4) on the square tube of the base (1), thread it from top to bottom with the external hexagon screw M8X55, and lock the other end with the external hexagon nut M8. Put the outer hexagon screw M10X55(15) onto the outer hexagon nut M10(18) and thread the screw head 40 mm from the base square tube from top to bottom. Then, lock the outer hexagon nut M10(18) onto the base square tube in reverse.
- Put the support arm base (2) on the disc of the base (1), and lock it with the hexagonal socket screw M6X16(11) and flange nut M6.
- Take the screen clamp (5) and stick it to the printing arm (2), insert it into the printing arm (2) hole from the screen clamp (5) with square neck bolt M10X20 (16), and put the other end on the sleeve with gasket M10(17). Then, lock the outer hexagon nut M10(18), and use wrench 14-17(I) to lock it.
It is important to read all safety warnings, instructions, illustrations, and specifications provided with the machine before use. Failure to follow all instructions listed may result in electric shock, fire, and/or serious injury. If you need technical support or have product questions, please contact CustomerService@vevor.com. VEVOR reserves a clear interpretation of the user manual, and the appearance of the product shall be subject to the product you received. Please verify carefully when placing an order with VEVOR if you are actually saving half in comparison with the top major brands.
NEED HELP? CONTACT US
Have product questions? Need technical support? Please feel free to contact
us: CustomerService@vevor.com
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
This symbol, placed before a safety comment, indicates a kind of precaution, warning, or danger. Ignoring this warning may lead to an accident. To reduce the risk of injury, fire, or electrocution, please always follow the recommendation shown below.
WARNING ：Read all safety warnings, instructions, illustrations and specifications provided with this machine. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
SAFETY INSTRUCTIONS
Save all warnings and instructions for future reference.
- Keep work area clean. Cluttered areas invite injuries.
- Observe work area conditions. Do not use machine in damp or wet locations. Don’t expose to rain. Keep work area well lighted. Do not use machine in the presence of flammable gases or liquids.
- Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, or extension cords. This machine can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- Store idle equipment. When not in use, machine must be stored in a dry location to inhibit rust. Always lock up machines and keep out of reach of children.
- Use the right machine for the job. Do not attempt to force a small machine or attachment to do the work of a larger industrial machine. There are certain applications for which this machine was designed. Do not modify this machine and do not use this machine for a purpose for which it was not intended.
- Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair.
- Maintain machines with care. Keep mahine clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect machine periodically and, if damaged, have them repaired by an authorized technician. The handles must be kept clean, dry, and free from oil and grease at all times.
- Stay alert. Watch what you are doing, use common sense. Do not operate any machine when you are tired.
- Check for damaged parts. Before using any machine, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not use the machine if any switch does not turn On and Off properly.
- Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use accessories intended for use with this machine. Approved accessories are available from VEVOR.
- Do not operate machine if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the machine. Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
INSTALLATION INSTRUCTIONS
- First take out the base(1)and put it on the table, then take out the table support bar(3)and put it on the base(1),and lock it with square neck bolt(16),gasket M10(17)and external hexagon nut M10(18) Locking tool wrench 17- 17(I).
Serial No| Name of accessories| Quantity
---|---|---
16| Square neck bolt M10X20| 2
17| Gasket M10| 2
18| Outer hexagon nut M10| 2
Serial No| Tool name| Picture
---|---|---
I| Wrench 14-17|
- Put the positioning seat(4)on the square tube of the base(1),thread it from top to bottom with the external hexagon screw M8X55,and lock the other end with the external hexagon nut M8. Put the outer hexagon screw M10X55(15) onto the outer hexagon nut M10(18)and thread the screw head 40 mm from the base square tube from top to bottom, then lock the outer hexagon nut M10 (18)onto the base square tube in reverse.
Serial No| Name of accessories| Quantity
---|---|---
15| External hexagon bolt M10X55| 1
18| Outer hexagon nut M10| 1
21| Felt pad| 1
Serial No| Tool name| Picture
---|---|---
I| Wrench 14-17|
- Put the support arm base(2)on the disc of the base(1),and lock it with the hexagonal socket screw M6X16(11)and flange nut M6
Serial No| Name of accessories| Quantity
---|---|---
11| Socket head cap screw M6X16| 16
12| Flange nut M6| 16
- Take the screen clamp(5)and stick it to the printing arm(2), insert it into the printing arm(2)hole from the screen clamp(5) with square neck bolt M10X20 (16),and put the other end on the sleeve with gasket M10(17),then lock the outer hexagon nut M10(18),and then use wrench 14 – 17(I)to lock it
Serial No| Name of accessories| Quantity
---|---|---
16| Square neck bolt M10X20| 8
17| Gasket M10| 8
18| Outer hexagon nut M10| 8
Serial No| Tool name| Picture
---|---|---
I| Wrench 14-17|
- Lock the five-star handle(19)into the screen clamp (5)with a depth of 20mm,cover the pressure plate(20),and then use a cross screwdriver(2) to lock the pressure plate(20)on the five-star handle(19)with a cross countersunk screw M4X8(9)from the small hole at the lower end of the screen clamp(5)
Serial No| Name of accessories| Quantity
---|---|---
10| Countersunk head screw M4X8| 8
24| Five star handle| 8
25| Tabletting| 8
Serial No| Tool name| Picture
---|---|---
II| Cross screwdriver|
- Put the spring hook plate(8)on the base disc,and lock it with the hexagonal socket screw M6X16 and flange nut M6
Serial No| Name of accessories| Quantity
---|---|---
11| Horn screw red M6X1 M6X16| 8
12| Flange nut M6| 8
- Hang the spring(23)on the screen clamp(5),hang the hooked end of the flower basket(22)on the spring hook plate(8),hook the looped end of the flower basket(22)with the spring(23),and then level the arm support
Serial No| Name of accessories| Quantity
---|---|---
27| Hook| 8
28| Spring| 8
- Take the wooden plate(7)and put it on the table with the hole facing up,then take the metal bracket(6)and put it on the wooden plate(7) and face the hole, then take the cross screwdriver(2)and put the cross countersunk head tapping screw M4X12(11)face the hole, and lock the iron box(6)on the wooden bedplate(7)
Serial No| Name of accessories| Quantity
---|---|---
11| Self tapping screw M4X16| 6
- Insert the bracket(6)in the bracket of the wooden plate assembled in step 8 into the plate support bar(3),and then insert the socket head screw M10X30(14)into the tooth hole of the bracket(6),and then use the socket head wrench M10(five)to lock the socket head screwM10X25(14)
Serial No| Name of accessories| Quantity
---|---|---
14| Socket head cap screw M10X25| 6
- Lock the socket head cap screw(13)on the base disc(as shown in the figure), and stick the felt pad(21)onto the head end of the socket head cap screw(13). Use the tool wrench 14- 17(I)
Serial No| Name of accessories| Quantity
---|---|---
13| Hexagon screw M8X30| 4
21| Felt pad| 4
List of accessories
| items | Description | |
|---|---|---|
| 1 | Name | Screen printing machine |
| 2 | Model | NS401-S |
| 3 | Product parameter | Printing color：4，Working Position：1 |
| 4 | Package Size | 610X540X235m |
| 5 | G.W. | 20.5kg |
- Manufacturer ：Dongguan Ruiling Printing Equipment Co.,Ltd
- Address ：Ruida Building, No 2 Lane 1, West of Xintang road, Huangcun Community, Humen Town, Dongguan City, China.
- EU Importer : WAITCHX, 250 bis boulevard Saint-Germain 75007 Paris.
- UK Importer : FREE MOOD LTD, 2 Holywell Lane, London, England, EC2A 3ET
EUREP GmbH Unterlettenweg 1a, 85051 Ingolstadt, Germany EUREP UK LTD UNIT 2264, 100 OCK STREET, ABINGDON OXFORDSHIRE ENGLAND 0X14 5DH
Support and E-Warranty Certificate
https://www.vevor.com/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>