PHILIPS HD9255 Aluminum Sawing Machine User Manual
- June 4, 2024
- Philips
Table of Contents
PHILIPS HD9255 Aluminum Sawing Machine
Important
Read this important information carefully before you use the appliance and
save it for future reference.
Danger
- Never immerse the appliance in water nor rinse it under the tap.
- Do not let any water or other liquid enter the appliance to prevent electric shock.
- Always put the ingredients to be fried in the basket, to prevent them from coming into contact with the heating elements.
- Do not cover the air inlet and the air outlet openings while the appliance is operating.
- Do not fill the pan with oil as this may cause a fire hazard.
- Do not use the appliance, if the plug, the mains cord or the appliance itself is damaged.
- Never touch the inside of the appliance while it is operating.
- Never put any amount of food that exceeds the maximum level indicated in the basket.
- Always make sure heater is free and no food stuck in heater
Warning
-
If the supply cord is damaged, it must be replaced by Philips, its service agent or similarly qualified persons in order to avoid a hazard.
-
Only connect the appliance to an earthed wall socket. Always make sure that the plug is inserted into the wall socket properly.
-
This appliance is not intended to be operated by means of an external timer or a separate remote-control system.
-
The accessible surfaces may become hot during use.
-
Children should be supervised to ensure that they do not play with the appliance.
-
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
-
Cleaning and user maintenance shall not be made by children without supervision.
-
Do not place the appliance against a wall or against other appliances. Leave at least
10 cm free space at the back, on both sides and above the appliance. Do not place anything on top of the appliance. -
During hot air frying, hot steam is released through the air outlet openings. Keep your hands and face at a safe distance from the steam and from the air outlet openings. Also, be careful of hot steam and air when you remove the pan from the appliance.
-
Never use light ingredients or packing paper in the appliance.
-
Storage of potatoes: The temperature shall be appropriate to the potato variety stored and it shall be above 6°C to minimize the risk of acrylamide exposure in the prepared foodstuff.
-
Do not place the appliance on or near a hot gas stove or all kinds of electric stove and electric cooking plates, or in a heated oven.
-
Never fill the pan with oil.
-
This appliance is designed to be used at ambient temperatures between 5°C and 40°C.
-
Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance.
-
Keep the mains cord away from hot surfaces.
-
Do not place the appliance on or near combustible materials such as a tablecloth or curtain.
-
Do not use the appliance for any other purpose than described in this manual and use only original Philips-accessories.
-
Do not let the appliance operate unattended.
-
The pan, basket and fat reducer becomes hot during and after use of the appliance, always handle carefully.
-
Thoroughly clean the parts that come into contact with food before you use the appliance for the first time. Refer to the instructions in the manual.
Caution
- This appliance is intended for normal household use only. It is not intended for use in environments such as staff kitchens of shops, offices, farms or other work environments. Nor is it intended to be used by clients in hotels, motels, bed and breakfasts and other residential environments.
- Always disconnect the appliance from the supply if it is left unattended and before you assemble, disassemble, store or cleaning.
- Place the appliance on a horizontal, even and stable surface.
- If the appliance is used improperly or for professional or semi-professional purposes or if it is not used according to the instructions in the user manual, the guarantee becomes invalid and Philips refuses any liability for damage caused.
- Always return the appliance to a service center authorized by Philips for examination or repair. Do not attempt to repair the appliance yourself, otherwise the guarantee becomes invalid.
- Always unplug the appliance after use.
- Let the appliance cool down for approximately 30 minutes before you handle or clean it.
- Make sure the ingredients prepared in this appliance come out golden yellow instead of dark or brown. Remove burnt remnants. Do not fry fresh potatoes at a temperature above 180°C (to minimize the production of acrylamide).
- Do not press the basket release button during shaking.
- Be careful when cleaning the upper area of the cooking chamber: Hot heating element, edge of Metal parts.
- Always make sure that the food is fully cooked in the Airfryer.
- Always make sure that you have the control over your Airfryer, also when using the remote function or delayed start.
- When cooking fatty food, the Airfryer could emit smoke. Pay special attention when using the remote control function or delayed start.
- Make sure that only one person at a time is using the remote control function.
- Be cautious when cooking easy perishable food with the delayed start function (bacteria may breed).
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable standards and
regulations regarding electromagnetic fields.
Automatic shut-off
This appliance is equipped with an automatic shut-off function. If you do not
press a button within 20 minutes, the appliance switches off automatically. To
switch off the appliance manually, press the power On/off button.
Introduction
Congratulations on your purchase and welcome to Philips!
To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
Philips Airfryer is the only Airfryer with unique Rapid Air technology to fry
your favorite foods with little or no added oil and up to 90% less fat.
Philips Rapid Air technology cooks food all around as well as our starfish
design for perfect results from your first bite to your last. You can now
enjoy perfectly cooked fried food—crispy on the outside tender on the
inside—Fry, grill, roast and bake to prepare a variety of tasty dishes in a
healthy, fast and easy way.
For more inspiration, recipes and information about the Airfryer, visit www.philips.com/kitchen or download the free NutriU App for IOS® or Android™.
The NutriU app may not be available in your country.
In this case please access your local Philips website for inspiration.
General description
- Control panel
- Temperature up button
- Temperature down button
- Menu button
- Preset menus
- On/Off button
- Time down button
- Time up button
- Time indication
- Screen
- Temperature indication K Wi-Fi indicator
- MAX indication
- Basket
- Basket release button 5 Pan
- Power cord
- Air outlets
- Air inlet
WiFi Indicator Status
The Wi-Fi indicator
is off
|
- Either your Airfryer is not connected to your home WiFi (no initial WiFi set-up done so far), or the connection to your home WiFi is lost due to e.g. home router has changed or the distance between the Airfryer and router is too far
The Wi-Fi indicator is on|
- Configuration with the NutriU App is complete and the Airfryer is connected to the Home WiFi
The Wi-Fi indicator is blinking| Either the Airfryer is in the “set-up“
mode during the WIFI set-up process. The screen shows three dashes and the
buttons on the Airfryer are inactive; or if it was already connected, the
blinking LED is an indication that the Airfryer is in the process of
connecting to the home WIFI.
The Wi-Fi indicator is blinking with long break in between| The WiFi
functionality of the Airfryer has defect. You can either use the Airfryer
without the connectivity features, or you can call the Philips service hot
line or contact the Consumer Care Center in your country.
Before first use
- Remove all packing material.
- Remove any stickers or labels (if available) from the appliance.
- Thoroughly clean the appliance before first use, as
The NutriU App
Your Philips Airfryer is WIFI enabled and allows you to connect with the
NutriU app to gain the full Airfryer experience. Within the app you can select
your favorite recipes, send it to the Airfryer and start it from your smart
device. You can start, monitor and adjust the cooking process on your smart
device from wherever you are, even if you are not at home.
Connecting your Airfryer to the app
- Put the plug of the Airfryer in the wall outlet.
- Make sure that your smart device is within reach of your home WIFI network before you start the easy WIFI set-up process.
- Download the Philips NutriU app on your smart device from your app store or from www.philips.com/NutriU, follow the registration process and select the connected Airfryeronnected Airfryer in your profile under “My Appliances”.
- Follow the instructions in the app to connect your Airfryer to your Wi-Fi and to pair your Airfryer.
- When the WIFI LED on the user interface of the Airfryer is solid on, the Airfryer is connected.
Note
- Make sure to connect your Airfryer to a 2.4 GHz 802.11 b/g/n home WiFi network.
- The easy WiFi set-up is needed to connect the Airfryer to your home WiFi.
- The pairing process is to connect the NutriU App with your smart Airfryer.
- The WiFi setup process can be cancelled via the App or by unplugging the Airfryer.
- To start the pairing process, long press the temperature down button and follow the instructions in the App, or start it from the settings in the NutriU App.
Voice control
- Download the NutriU App.
- Connect the NutriU App with your Airfryer.
- Give consent to “remote cooking”.
- Connect the NutriU App with your voice assistant App. This connection can be done directly while onboarding or later in the settings of the NutriU App. In case you do not see the option to activate voice control in NutriU, activate the Kitchen+ skill through your voice assistant App.
Note
- If you do not have a voice control App, download it first to send commands to the Airfryer.
- Detailed voice commands are available in the App for voice control.
Preparing for use
Place the appliance on a stable, horizontal, level and heat-resistant surface.
Note
- Do not put anything on top or on the sides of the appliance. This could disrupt the airflow and affect the frying result.
- Do not place the operating appliance near or underneath objects that could be damaged by steam, such as walls and cupboard.
- Leave the rubber plug in the pan. Do not remove it before cooking.
Using the appliance
Food table
The table below helps you select the basic settings for the types of food you want to prepare.
Note
- Keep in mind that these settings are suggestions. As ingredients differ in origin, size, shape as well as brand, we cannot guarantee the best setting for your ingredients.
- When preparing larger amount of food (e.g. fries, prawns, drumsticks, frozen snacks), shake, turn, or stir the ingredients in the basket 2 to 3 times in order to achieve a consistent result.
Ingredients| Min.– max.
amount
| Time
(min)
| Temperature| Note
---|---|---|---|---
Thin frozen fries
(7×7 mm/0.3×0.3 in)
| 200-500g/
7-18 oz
| 16-22| 180°C/350°F| Shake, turn or stir
2-3 times in between
Homemade fries
(10×10 mm/0.4×0.4 in thick)
| 200-500g/
7-18 oz
| 18-26| 180°C/350°F| Shake, turn or stir
2-3 times in between
Frozen chicken nuggets| 200-600g/
7-21 oz
| 10-15| 200°C/400°F| Shake, turn or stir halfway
Frozen spring rolls| 200-600g/
7-21 oz
| 10-15| 200°C/400°F| Shake, turn or stir halfway
Hamburger (around 150 g/5 oz)| 1-3 patties| 15-20| 200°C/400°F|
Meat loaf| 800 g/28 oz| 50-55| 150°C/300°F| Use the baking accessory
Meat chops without bone
(around 150 g/5 oz)
| 1-2 chops| 11-15| 200°C/400°F| Shake, turn or stir halfway
Thin sausages
(around 50 g/1.8 oz)
| 1-6 pieces| 9-13| 200°C/400°F| Shake, turn or stir halfway
Chicken drumsticks (around 125 g/4.5 oz)| 2-6 pieces| 18-24| 180°C/350°F|
Shake, turn or stir halfway
Chicken breast
(around 160 g/6 oz)
| 1-3 pieces| 20-25| 180°C/350°F|
Whole fish (around 300-400 g/11-14 oz)| 1 fish| 15-20| 200°C/400°F|
Fish filet (around 200 g/7 oz)| 1-3 (1 layer)| 22-25| 160°C/325°F|
Mixed vegetables (roughly chopped)
|
200-600 g/
7-21 oz
|
10-20
|
180°C/350°F
|
- Set the cooking time according to your own taste
- Shake, turn or stir halfway
Muffins (around 50 g/1.8 oz)| 1-7| 12-14| 180°C/350°F| Use the Muffin cups
Cake| 500 g/18 oz| 50-60| 160°C/325°F| Use a cake pan
Ingredients| Min.– max.
amount
| Time
(min)
| Temperature| Note
---|---|---|---|---
Pre-baked bread/rolls (around 60 g/ 2 oz)| 1-4 pieces| 6-8| 200°C/400°F|
Homemade bread| 500 g/18 oz| 50-60| 150°C/300°F|
- Use the baking accessory
- The shape should be as flat as possible to avoid that the bread touches the heating element when rising.
Caution
- This is an Airfryer that works on hot air. Do not fill the pan with oil, frying fat or any other liquid.
- Do not touch hot surfaces. Use handles or knobs. Handle the hot pan with oven-safe gloves.
- This appliance is for household use only.
- This appliance may produce some smoke when you use it for the first time. This is normal.
- Preheating of the appliance is not necessary.
-
Put the plug in the wall outlet.
-
Remove the pan with the basket from the appliance by pulling the handle.
-
Put the ingredients in the basket.
Note
- The Airfryer can prepare a large range of ingredients. Consult the “Food table” for the right quantities and approximate cooking times.
- Do not exceed the amount indicated in the “Food table” section or overfill the basket beyond the “MAX” indication as this could affect the quality of the end result.
- If you want to prepare different ingredients at the same time, make sure you check the suggested cooking time required for the different ingredients before you start to cook them simultaneously.
-
Put the pan with the basket back into the Airfryer.
Caution
- Never use the pan without the basket in it.
- Do not touch the pan or the basket during and for some time after use, as they get very hot.
-
Press the power On/Off button to switch on the appliance.
-
Press the temperature up or down button to choose the needed temperature.
-
Press the time up button to choose the needed time.
-
Press the On/Off button to start the cooking process.
Note
-
During cooking the temperature and time are shown alternately.
-
The last cooking minute counts down in seconds.
-
Refer to the food table with basic cooking settings for different types of food.
-
When the cooking process is started and your Airfryer is paired with your smart device, you can see, control and change the cooking parameters also in the NutriU app.
Tip -
During cooking, if you want to change the cooking time or temperature, press the corresponding up or down button at any time to do so.
-
To pause the cooking process, press the On/Off button. To resume the cooking process, press the On/Off button again to continue the cooking process.
-
The device is automatically in pause mode when you pull out the pan and the basket. The cooking process continues when the pan and the basket are put in the appliance again.
-
To change the temperature unit from Celsius to Fahrenheit or the other way around on your Airfryer, press the temperature up and down button at the same time for about 10 seconds.
Note
-
If you do not set the required cooking time within 20 minutes, the appliance automatically shuts off for safety reasons.
-
Some ingredients require shaking or turning halfway through the cooking time (see “Food table”). To shake the ingredients, pull out the pan with the basket, place it on a heat resistant work top, slide the lid and press the basket release button to remove the basket and shake the basket over the sink. Then put the basket into the pan, and slide them back into the appliance.
-
-
When you hear the timer bell, the cooking time has elapsed.
-
Pull out the pan and check if the ingredients are ready.
Caution: The Airfryer pan is hot after the cooking process. Always place it on a heat resistant work top (eg. trivet, etc.) when you remove the pan from the device.
Note: If the ingredients are not ready yet, simply slide the pan back into the Airfryer by the handle and add a few extra minutes to the set time. -
To remove small ingredients (e.g. fries), lift the basket out of the pan by sliding the lid first, and then pressing the basket release button.
Caution After the cooking process, the pan, the basket, the interior housing and the ingredients are hot. Depending on the type of ingredients in the Airfryer, steam may escape from the pan. -
Empty the basket contents into a bowl or onto a plate.
Always remove the basket from the pan to empty contents as hot oil may be in the bottom of the pan.
Note
- To remove large or fragile ingredients, use a pair of tongs to lift out the ingredients.
- Excess oil or rendered fat from the ingredients is collected on the bottom of the pan.
- Depending on the type of ingredients cooking, you may want to carefully pour off any excess oil or rendered fat from the pan after each batch or before shaking or replacing the basket in the pan. Place the basket on a heat-resistant surface. Wear oven-safe gloves to pour off excess oil or rendered fat. Return the basket into the pan.
When a batch of ingredients is ready, the Airfryer is instantly ready for preparing another batch.
Note
Repeat steps 3 to 12 if you want to prepare another batch.
-
Press the On/Off button to turn on the Airfryer.
-
Press the menu button as often as the keep warm icon is blinking.
-
Press the On/Off button to start the keep warm mode.
Note- The keep warm timer is set to 30 minutes. To change the keep warm time (1 – 30 minutes), press the time down button. The time will be confirmed automatically.
- The temperature cannot be changed in keep warm mode.
-
To pause the keep warm mode, press the On/Off button To resume the keep warm mode, press the On/Off button again.
-
To exit the keep warm mode, long press the On/Off button.
Tip: If food like French fries loses too much crispness during the keep warm mode, either shorten the keep warm time by switching off the appliance earlier or crisp them up for 2-3 minutes at the temperature of 180°C/350°F.
Note
- During the keep warm mode, the fan and heater inside of the appliance turn on from time to time.
- The keep warm mode is designed to keep your food warm immediately after it is cooked in the Airfryer. It is not meant for reheating.
-
Follow steps 1 to 5 in chapter “Airfrying”.
-
Press the Menu button. The frozen snacks icon is blinking.
Press the Menu button as often as your needed preset is blinking. -
Start the cooking process by pressing the On/Off button.
Note: In the following table you can find more information about the presets.
Preset | Preset tim(min) | Preset temperature | Weight (Max.) | Information |
---|---|---|---|---|
Frozen potato based snacks | 22 | 180°C/350°F | 500 g/18 oz |
- Potato based frozen snacks like frozen French fries, potato wedges, crisscross fries etc.
- Shake, turn or stir 2-3 times in between
Fresh fries| 26| 180°C/35| 500 g/18 oz|
- Use mealy potatoes
- 10x10mm/0.4×0.4 in thick cut
- Soak 30 minutes in water, dry then add ¼ to 1 tbsp of oil
- Shake, turn or stir 2-3 times in between
Chicken drumsticks| 24| 180°C/350°F| 750 g/26 oz|
- Up to 6 chicken drumsticks
- Shake, turn or stir in between
Fish filet around 200 g/ 7 oz| 23| 160°C/325°F| 600 g/21 oz|
| | | |
---|---|---|---|---
Preset| Preset time
(min)
| Preset temperature| Weight (Max.)| Information
Muffin| 13| 180°C/350°F| 50 g/1.8 oz per muffin| 7 muffins in one go
Meat chops| 13| 200°C/400°F| 300 g/11 oz| Up to 2 meat chops without bone
Mixed vegetables|
20
|
180°C/350°F
|
600 g/21 oz
|
- Roughly chopped
- Use the XL baking accessory
Keep warm| 30| 80°C/175°F| N/A| Temperature cannot be adjusted
- During the cooking process long press the power On/Off button to stop the cooking process. The device is then in stand-by mode.
- Press the On/Off button again to turn on the device.
- Press the menu button as often as your needed preset is blinking.
- Press the On/Off button to start the cooking process.
Starting a recipe from the NutriU App
- Press the On/Off button to turn on the Airfryer.
- Open the NutriU App on your smart device and look for your preferred recipe.
- Open the recipe and start the cooking process in the App.
Note
Make sure that when cooking recipes that are developed for your Airfryer,
use the same amount of food mentioned in the recipes. When using different
ingredients or a different amount of food items, adjust the cooking time. When
cooking recipes that are not developed for your Airfryer, be aware the time
and temperature might be adjusted.
Tip
- Via the filter in the recipe search you can filter your smart Airfryer to get the recipes that are developed for your device.
- When the cooking process is started from the App, you can see the cooking settings also on the screen of the Airfryer.
- You can pause the cooking process or change the settings on the Airfryer or in the App.
- When the cooking process is over you can start the keep warm mode in the App or start it from the “keep warm” preset on the Airfryer.
- If the food is not done yet, you can also prolong the cooking process within the App or on the Airfryer.
- To exit the cooking process before the cooking time is over, long press the On/Off button on the Airfryer or press the pause and then the stop icon in the App.
- You can also start your individual time and temperature in the NutriU App.
- On the bottom of the Home Screen there is the button to go to the home screen, the recipes, manual mode, articles or your profile. Press the manual mode button and send your individual time and temperature to the Airfryer.
To make great home-made fries in the Airfryer:
- Choose a potato variety suitable for making fries, e.g. fresh,(slightly) floury potatoes.
- It is best to air fry the fries in portions of up to 500 g/18 oz for an even result.
Larger fries tend to be less crispy than smaller fries.
-
Peel the potatoes and cut into sticks (10 x 10 mm/0.4 x 0.4 in thick).
-
Soak the potato sticks in a bowl of water for at least 30 minutes.
-
Empty the bowl and dry the potato sticks with a dish towel or paper towel.
-
Pour one tablespoon of cooking oil into the bowl, put the sticks in the bowl and mix until the sticks are coated with oil.
-
Remove the sticks from the bowl with your fingers or a slotted kitchen utensil so excess oil remains in the bowl.
Note: Do not tilt the bowl to pour all the sticks in the basket at once to prevent excess oil from going into the pan. -
Put the sticks into the basket.
-
Fry the potato sticks and shake the basket 2-3 times during cooking.
Warning
- Let the basket, the pan, and the inside of the appliance cool down completely before you start cleaning.
- The pan, the basket, and the inside of the appliance have a non-stick coating. Do not use metal kitchen utensils or abrasive cleaning materials as this may damage the non-stick coating.
Clean the appliance after every use. Remove oil and fat from the bottom of the pan after every use.
-
Press the power On/Off ( ) button to switch off the appliance, remove the plug from the wall outlet and let the appliance cool down.
Tip Remove the pan and the basket to let the Airfryer cool down more quickly. -
Dispose of rendered fat or oil from the bottom of the pan.
-
Clean the pan and the basket in a dishwasher. You can also clean them with hot water, dishwashing liquid and a non-abrasive sponge (see “Cleaning table”).
Note Put the pan with the rubber plug in the dishwasher. Do not remove the rubber plug before cleaning.
Tip- If food residues stuck to the pan or the basket, you can soak them in hot water and dishwashing liquid for 10–15 minutes. Soaking loosens the food residues and makes it easier to remove. Make sure you use a dishwashing liquid that can dissolve oil and grease. If there are grease stains on the pan or the basket and you have not been able to remove them with hot water and dishwashing liquid, use a liquid degreaser.
- If necessary, food residues stuck to the heating element can be removed with a soft to medium bristle brush. Do not use a steel wire brush or a hard bristle brush, as this might damage the coating on the heating element.
-
Wipe the outside of the appliance with a moist cloth.
Note: Make sure no moisture remains on the control panel. Dry the control panel with a cloth after you have cleaned it. -
Clean the heating element with a cleaning brush to remove any food residues.
-
Clean the inside of the appliance with hot water and a non-abrasive sponge.
Storage
- Unplug the appliance and let it cool down.
- Make sure all parts are clean and dry before storing.
Note
- Always hold the Airfryer horizontally when you carry it. Make sure that you also hold the pan on the front part of the appliance as the pan with the basket can slide out of the appliance if accidentally tilted downwards. This can lead to damaging of these parts.
- Always make sure that the removable parts of the Airfryer are fixed before you carry and/or store it.
Recycling
- Do not throw away the product with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment.
- Follow your country’s rules for the separate collection of electrical and electronic products. Correct disposal helps prevent negative consequences for the environment and human health.
Declaration of Conformity
Hereby, DAP B.V. declares that the Airfryer HD9255 is in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address:
https://www.philips.com.
The Airfryer HD9255 is equipped with a WiFi module, 2.4GHz 802.11 b/g/n with a
maximum output power of 92,9mW EIRP.
Guarantee and support
If you need information or support, please visit
www.philips.com/support or read the separate
worldwide guarantee leaflet.
Software updates
Updating is essential to safeguard your privacy and the proper functioning of
your Airfryer and the App.
From time to time, the App is updating automatically to the latest software.
Also the Airfryer is updating the firmware automatically.
Note
- When an update is being installed, make sure that your Airfryer is connected to the home WiFi. The smart device can be connected to any network.
- Always use the latest App and firmware.
- Updates are made available when there are software improvements or to prevent a security issue.
- A firmware update is started automatically when the Airfryer is in stand-by mode. This update takes up to 1 minute and the screen on the Airfryer shows blinking “—”. During this time the Airfryer cannot be used.
Device compatibility
For detailed information about the compatibility of the App, please refer to
the information in the App Store.
Factory reset
For a factory reset of the Airfryer, press the temperature and time up buttons
at the same time for 10 seconds.
Your Airfryer is then no more connected to your home WiFi and not paired with
your smart device anymore.
Troubleshooting
This chapter summarizes the most common problems you could encounter with the
appliance. If you are unable to solve the problem with the information below,
visit www.philips.com/support for a list of
frequently asked questions or contact the Consumer Care Center in your
country.
Problem | Possible cause | Solution |
---|---|---|
The outside of the appliance becomes hot during use. | The heat inside radiates | |
to the outside walls. | This is normal. All handles and knobs that you need to |
touch during use stay cool enough to touch.
| | The pan, the basket, and the inside of the appliance always become hot
when the appliance is switched on to ensure the food is properly cooked. These
parts are always too hot to touch.
| | If you leave the appliance switched on for a longer time, some areas get
too hot to touch. These areas are marked on the appliance with the following
icon:
As long as you are aware of the hot areas and avoid touching them, the appliance is completely safe to use.
My home-made fries do not turn out as I expected.| You did not use the right
potato type.| To get the best results, use fresh floury potatoes. If you need
to store the potatoes, do not store them in a cold environment like in a
fridge. Choose potatoes whose package states that they are suitable for
frying.
| The amount of ingredients in the basket is too big.| Follow the instructions
on page 20 in this user manual to prepare home-made fries.
| Certain types of ingredients need to be shaken halfway through the cooking
time.| Follow the instructions on page 20 in this user manual to prepare home-
made fries.
The Airfryer does not switch on.| The appliance is not plugged in.| Check if
the plug is inserted in the wall outlet properly.
| Several appliances are connected to one outlet.| The Airfryer has a high
wattage. Try a different outlet and check the fuses.
| Problem| Possible cause| Solution
---|---|---|---
I see some peeling off spots inside my Airfryer.
| Some small spots can appear inside the pan of the Airfryer due to the
incidental touching or scratching of the coating (e.g. during cleaning with
harsh cleaning tools and/ or while inserting the basket).| You can prevent
damage by lowering the basket into the pan properly. If you insert the basket
at an angle, its side may knock against the wall of the pan, causing small
pieces of coating to chip off. If this occurs, please be informed that this is
not harmful as all materials used are food-safe.
White smoke comes out of the appliance.| You are cooking fatty ingredients.|
Carefully pour off any excess oil or fat from
the pan and then continue cooking.
| The pan still contains greasy residues from previous use.| White smoke is
caused by greasy residues heating up in the pan. Always clean the pan and the
basket thoroughly after every use.
| Breading or coating did not adhere properly to the food.| Tiny pieces of
airborne breading can cause white smoke. Firmly press breading or coating to
food to ensure it sticks.
| Marinade, liquid or meat juices are splattering
in the rendered fat or grease.
| Pat food dry before placing it in the basket.
The screen on the
Airfryer shows “E1”.
| The device is broken/ defect.| Call the Philips service hot line or contact
the Consumer Care Center in your country.
| Your Airfryer might be stored in a place where it is too cold.| If your
device was stored at a low ambient temperature, let it warm up to room
temperature for at least 15 minutes before you plug it in again.
If your display still shows “E1”, call the Philips service hot line or contact the Consumer Care Center in your country.
The WiFi LED on my Airfryer is not shining anymore.|
- The Airfryer is not connected to your home WiFi anymore.
- You have changed your home WiFi network.
| Repeat the pairing process in the order described in the app. If it doesn’t
help, start the setup process again.
The App shows that the pairing process is not successful.| Check whether you
have done the steps in the order that is described in the app: First push the
button on the appliance, then activate pairing in the app.| Repeat the pairing
process in the order described in the app. If it doesn’t help, start the setup
process again.
My display shows
blinking “—”.
| Your Airfryer is updating
the firmware.
| Wait for about one minute before the firmware update process is finished. You cannot use the Airfryer during the firmware update.
References
- Philips Kitchen Appliances - Air Fryers, Blenders & More | Philips
- Download HomeID App iOS & Android | HomeID
- Support Home | Philips
- Product registration | Philips
- Laden Sie die HomeID App für iOS und Android herunter | HomeID
- Philips - United States | Philips
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>