Shelly 1 Mini Gen3 Wi-Fi Smart Switch with Potential Free Contacts User Guide

Shelly 1 Mini Gen3 Wi-Fi Smart Switch with Potential Free Contacts

Specifications

• Product Name: Shelly 1 Mini Gen3
• Functionality: Wi-Fi smart switch with potential-free contacts
• Input Voltage: 110 – 240 VAC
• Output Voltage: max. 240 VAC, max. 30 VDC
• Rated Current: max. 10A
• Interrupting Rating: min. 6kA

Product Usage Instructions

Mounting and Installation

1. Ensure breakers are turned off and there is no voltage on their terminals using a mains voltage tester or multimeter.
2. Use solid single-core wires or stranded wires with ferrules for connection.
3. Secure the Device with a cable protection switch by EN60898-1.

Remote Control Setup

1. Connect the Shelly 1 Mini Gen3 to your home Wi-Fi network following the manufacturer’s instructions.
2. Download the Shelly Smart Control mobile application on your smartphone.
3. Follow the app instructions to pair the device with your account for remote access.

Firmware Updates

1. Check for firmware updates through the embedded web interface or the Shelly Smart Control mobile application.
2. Review details about the latest firmware version before deciding to install the update.
3. The decision to install firmware updates is the user’s responsibility for device performance and security.

USER AND SAFETY

Wi-Fi smart switch with potential-free contacts

Shelly 1 Mini Gen3

Read before use
This document contains important technical and safety information about the device, its safe use, and installation.

CAUTION! Before you start the installation, read carefully and entirely this guide carefully and any other documents accompanying the device. Failure to follow the installation procedures can lead to malfunction, danger to your health and life, violation of law, or refusal of legal and commercial guarantees (if any). Shelly Europe Ltd. is not responsible for any loss or damage in case of incorrect installation or improper operation of this device due to failure to follow the user and safety instructions in this guide.

Product Description

• Shelly 1 Mini Gen3 (the Device) is a small form factor smart switch with potential-free contacts, which allows remote control of electric appliances
• It can be retrofitted into standard electrical wall boxes, behind power sockets, and light switches, or in other places with limited space.
• The Device can be accessed, controlled, and monitored remotely from any place where the User has Internet connectivity, as long as the device is connected to a Wi-Fi router and the Internet.

The Device has an embedded web interface that you can use to monitor, control the Device, and adjust its settings. The web interface is accessible at http://192.168.33.1 when you are connected directly to the Device access point or at its IP address when you and the Device are connected to the same network.

NOTICE: The Device comes with a factory-installed firmware. To keep it up-to-date and secure, Shelly Europe Ltd. provides the latest firmware updates free of charge. You can access the updates through either the embedded web interface or the Shelly Smart Control mobile application, where you can find details about the latest firmware version. The choice to install or not the firmware updates is the user’s sole responsibility. Shelly Europe Ltd. shall not be liable for any lack of conformity of the Device caused by the failure of the user to install the available updates promptly.

Schematic

Legend

Device terminals

• SW: Switch input terminal
• O: Relay output terminal
• I: Relay input terminal
• L: Live (110-240 VAC) terminal
• N: Neutral terminal

Wires

• N: Neutral wire
• L: Live (110 – 240 VAC) wire Installation Instructions

CAUTION

• Danger of electrocution. Mounting/installation of the Device to the power grid has to be performed with caution, by a qualified electrician.
• Danger of electrocution. Every change in the connections has to be done after ensuring there is no voltage present at the Device terminals.
• Do not use the device if it shows any sign of damage or defect.
• Do not open the device. It does not contain any parts that can be maintained by the user. For safety and licensing reasons, unauthorized change and/or modification of the device is not permitted.
• Use the Device only with a power grid and appliances that comply with all applicable regulations. A short circuit in the power grid or any appliance connected to the Device may damage it.
• No SELV/PELV circuits may be connected to the terminals of the inputs and outputs, including the extension inputs.
• Do not connect the Device to appliances exceeding the given max load!
• Connect the Device only in the way shown in these instructions. Any other method could cause damage and/or injury.
• The Device is intended for indoor use only.
• Keep the Device away from liquids and moisture. Do not use the device in places with high humidity.
• The Device can control electric circuits and appliances wirelessly. Proceed with caution! Irresponsible use of the Device may lead to malfunction, danger to your life, or violation of the law.
• The Device has to be secured by a cable protection switch by EN60898-1 (tripping characteristic B or C, max. 10 A rated current, min. 6  kA interrupting rating, energy limiting class 3).
• Before starting the mounting/installation of the Device, check that the breakers are turned off and there is no voltage on their terminals. This can be done with a mains voltage tester or multimeter. When you are sure that there is no voltage, you can proceed to
• connect the wires.
• RECOMMENDATION: Connect the Device using solid sin-gle-core wires or stranded wires with ferrules.
• Connect the load circuit to the Device I and O terminals. Connect the Live wire to the Device L terminal, and the Neutral wire to the N terminal as shown in fig. 1.
• Connect a switch or a button to the Device SW terminal and the Live wire.

ATTENTION! Do not use buttons or switches with built-in LED or glow lamps!
RECOMMENDATION: For inductive appliances that cause voltage spikes during switching on/off, such as electrical motors, fans, vacuum cleaners, and similar ones, an RC snubber (0.1µF / 100 Ω / 1/2 W / 600 VAC) should be connected parallel to the appliance. The RC snubber can be purchased at: https://www.shelly.com/en/products/shop/rc-snubber.

Initial Inclusion
If you choose to use the Device with the Shelly Smart Control mobile application and cloud service, instructions on how to connect the Device to the Cloud and control it through the Shelly Smart Control app can be found in the mobile application guide. The Shelly mobile application and Shelly Cloud service are not conditions for the Device to function properly. This Device can be used standalone or with various other home automation platforms and protocols.

CAUTION! Do not allow children to play with the buttons/switches connected to the Device. Keep the devices for remote control of Shelly (mobile phones, tablets, PCs) away from children.

Specifications

• Dimensions (HxWxD): 29x34x16 mm / 1.34×1.11×0.63 in

• Ambient temperature: -20 °C to 40 °C / -5 °F to 105 °F

• Humidity 30 % to 70 % RH

• Max. altitude 2000 m / 6562 ft

• Power supply: 110 – 240 VAC, 50/60Hz

• Electrical consumption: < 1.2 W

• Max. switching voltage AC: 240 V

• Max. switching voltage DC: 30 V

• Max. switching current AC: 8 A

• Max. switching current DC: 5 A

• Potential-free contacts: Yes

• RF band: 2400 – 2495 MHz

• Max. RF power: < 20 dBm
  Wi-Fi protocol: 802.11 b/g/n

• Wi-Fi operational range (depending on local conditions):

  • up to 50 m / 160 ft outdoors
  • up to 30 m / 100 ft indoors

• Bluetooth protocol: 4.2

• Bluetooth operational range (depending on local condi-tions):

  • up to 30 m / 100 ft outdoors
  • up to 10 m / 33 ft indoors

• CPU: ESP-Shelly-C38F

• Flash: 8 MB

• Schedules: 20

• Webhooks (URL actions): 20 with 5 URLs per hook

• Scripting: Yes

• MQTT: Yes

Declaration of conformity

Hereby, Shelly Europe Ltd. declares that the radio equipment type Shelly 1 Mini Gen3 complies with Directive 2014/53/EU, 2014/35/EU, 2014/30/EU, 2011/65/EU. The full text of the EU Declaration of Conformity is available at the following internet address: https://shelly.link/1mini_gen3_DoC

More Information

• Manufacturer: Shelly Europe Ltd.
• Address: 103 Cherni Vrah Blvd., 1407 Sofia, Bulgaria
• Tel.: +359 2 988 7435
• E-mail: support@shelly.cloud
• Official website: https://www.shelly.com

Changes in the contact information data are published by the Manufacturer on the official website.
All rights to the trademark Shelly® and other intellectual rights associated with this Device belong to Shelly Europe Ltd.

FAQ

• Q: How can I reset the Shelly 1 Mini Gen3 to factory settings?
  • A: To reset the device, press and hold the reset button for at least 5 seconds until the LED starts blinking rapidly.
• Q: Can I use the Shelly 1 Mini Gen3 with voice assistants like Amazon Alexa or Google Assistant?
  • A: Yes, the Shelly 1 Mini Gen3 is compatible with voice assistants for hands-free control of connected appliances.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>