Hisense RF749N4SWSE French Style Fridge Freezer User Manual
- June 13, 2024
- Hisense
Table of Contents
Hisense RF749N4SWSE French Style Fridge Freezer
Product Information:
Model: RF749N4SWSE
Language: English
Disposal of the Appliance:
Refer to page 26 of the user manual for instructions on how to dispose of the
appliance.
Warning: Risk of fire/flammable materials. Avoid opening flames and sources of
ignition if the refrigerant circuit is damaged.
Thoroughly ventilate the room where the appliance is situated. Do not alter
the specifications or modify the product. Any damage to the cord may cause a
short circuit, fire, and/or electric shock.
Caution: To avoid injury or damage to the appliance, do not overload the
door racks or put too much food in the crisper drawers. Food needs to be
packed into bags before putting it into the refrigerator. Liquids need to be
stored in bottles or capped containers to prevent spills, as the design
structure of the product is not easy to clean. This refrigerating appliance is
not intended to be used as a built-in appliance.
Care and Cleaning
Before maintenance, switch off the appliance and disconnect the mains plug
from the mains socket. Do not clean the appliance with metal objects, steam
cleaner, ethereal oils, organic solvents, or abrasive cleansers. Use a plastic
scraper to remove frost from the appliance.
Clean water tanks if they have not been used for 48 hours. Flush the water
system connected to a water supply if water has not been drawn for 5 days.
Proper Disposal of Your Old Refrigerator:
Remove doors from your old refrigerator before throwing it away. Dispose of
the refrigerator in accordance with Federal and Local regulations.
Refrigerants must be evacuated by a licensed, EPA certified refrigerant
technician.
Parts and Features
The product includes a Wi-Fi Module, Refrigerator Door Bin, Rotary Separator, Refrigerator LED Light and Control Panel, Water Tank, Refrigerator Light, Fridge Door Left, Fridge Door Right, My Fresh Choice Door, and Freezer Door. Please note that the appearance of your model may differ from the images in the manual depending on its features.
Energy Efficiency:
To achieve the best energy efficiency, place all shelves and drawers in their
original positions as illustrated in the manual.
Installation Requirements
Follow the recommended clearances to avoid explosion and fire hazards. Keep flammable materials and vapors, such as gasoline, away from the appliance.
Product Usage
- Avoid opening flames and sources of ignition if the refrigerant circuit is damaged. Thoroughly ventilate the room where the appliance is situated.
- Do not alter the specifications or modify the product. Any damage to the cord may cause a short circuit, fire, and/or electric shock.
- Do not overload the door racks or put too much food in the crisper drawers to prevent injury or damage to the appliance.
- Pack food into bags before putting it into the refrigerator.
- Store liquids in bottles or capped containers to prevent spills, as the design structure of the product is not easy to clean.
- Do not use metal objects, steam cleaner, ethereal oils, organic solvents, or abrasive cleansers to clean the appliance. Use a plastic scraper for removing frost.
- Clean water tanks if they have not been used for 48 hours. Flush the water system connected to a water supply if water has not been drawn for 5 days.
- When disposing of your old refrigerator, remove the doors before throwing it away. Dispose of it in accordance with Federal and Local regulations. Refrigerants must be evacuated by a licensed, EPA certified refrigerant technician.
- Familiarize yourself with the parts and features of the product as listed in the manual. 10. Follow the recommended clearances during installation to avoid explosion and fire hazards. Keep flammable materials and vapors away from the appliance.
USER’S OPERATION MANUAL
Before operating this unit, please read this manual thoroughly, and retain for
future reference RF749N4SWSE
EN English
20 20 22 22 22 23 23 24 DISPOSAL OF THE APPLIANCE…………………………………………………………………………………… 26
Safety for children and others who are vulnerable people According to EN
standard This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision. Children aged
from 3 to 8 years are allowed to load and unload refrigerating appliances.
According to IEC standard This appliance is not intended for use by persons
(including children) with reduced physical sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their
safety. Children should be supervised to ensure that they do not play with the
appliance. Keep all packaging away from children as there is risk of
suffocation. If you are discarding the appliance, pull the plug out of the
socket, cut the connection cable (as close to the appliance as you can) and
remove the door to prevent children playing from suffering an electric shock
or from closing themselves inside it. If this appliance, featuring a magnetic
door seals, is to replace an older appliance having a spring lock (latch) on
the door or lid, be sure to make the spring lock unusable before you discard
the old appliance. This will prevent it from becoming a death trap for a
child.
4
General safety This appliance is intended to be used in household and similar
applications such as : -staff kitchen areas in shops, offices and other
working environments; -farm houses and by clients in hotels, motels and other
residential type environments; -bed and breakfast type environments; -catering
and similar non-retail applications. Do not store explosive substances such as
aerosol cans with a flammable propellant in this appliance. If the supply cord
is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard. WARNING — Keep
ventilation openings, in the appliance enclosure or in the built-in structure,
clear of obstruction. WARNING — Do not use mechanical devices or other means
to accelerate the defrosting process, other than those recommended by the
manufacturer. WARNING — Do not damage the refrigerant circuit. WARNING — Do
not use electrical appliances inside the food storage compartments of the
appliance, unless they are of the type recommended by the manufacturer. The
refrigerant and insulation blowing gas are flammable. When disposing of the
appliance, do so only at an authorized waste disposal centre. Do not expose to
flame. WARNING –When positioning the appliance, ensure the supply cord is not
trapped or damaged. WARNING– Fill with potable water only for the water
container.
5
WARNING –Do not locate multiple portable socketoutlets or portable power
supplies at the rear of the appliance. Replacing the LED WARNING–The LED light
must not be replaced by the user! If the LED light is damaged, contact the
customer helpline for assistance. Refrigerant The refrigerant isobutene
(R600a) is contained within the refrigerant circuit of the appliance, a
natural gas with a high level of environmental compatibility, which is
nevertheless flammable. During transportation and installation of the
appliance, ensure that none of the components of the refrigerant circuit
becomes damaged. The refrigerant (R600a) is flammable. WARNING — Refrigerators
contain refrigerant and gases in the insulation. Refrigerant and gases must be
disposed of professionally as they may cause eye injuries or ignition. Ensure
that tubing of the refrigerant circuit is not damage prior to proper disposal.
Warning :risk of fire/flammable materials If the refrigerant circuit should be
damaged: Avoid opening flames and sources of ignition. Thoroughly ventilate
the room in which the appliance is situated. It is dangerous to alter the
specifications or modify this product in any way. Any damage to the cord may
cause a short circuit, fire, and/or electric shock.
6
Electrical safety The power cord must not be lengthened. Make sure that the
power plug is not crushed or damaged.A crushed or damaged power plug may
overheat and cause a fire. Make sure that you can access the main plug of the
appliance. Do not pull the main cable. If the power plug socket is loose, do
not insert the power plug.There is a risk of electric shock or fire. You must
not operate the appliance without the interior lighting lamp cover. The fridge
is only applied with power supply of single phase alternating current of
220~240V/50Hz. If fluctuation of voltage in the district of user is so large
that the voltage exceeds the above scope, for safety sake, be sure to apply
A.C. Automatic voltage regulator of more than 350W to the fridge.The fridge
must employ a special power socket instead of common one with other electric
appliances. Its plug must match the socket with ground wire. Daily use
*OPSEFSUPTFOTFUIFUFNQFSBUVSFBOEIVNJEJUZOFBS
UIFBQQMJBODFBOENBLFUIFBQQMJBODFSVOCFUUFS
BEEUFNQFSBUVSFBOEIVNJEJUZTFOTPSTPVUTJEFUIF CPYPGBQQMJBODF Do not store
flammable gass or liquids in the appliance,There is a risk of an explosion. Do
not operate any electrical appliances in the appliance (e.g.electric ice cream
makers,mixers etc.). When unplugging always pull the plug from the mains
socket,do not pull on the cable.
7
Do not place hot items near the plastic components of this appliance. Do not
place food products directly against the air outlet on the rear wall. Store
pre-packed frozen food in accordance with th e frozen food manufacture’s
instructions. The appliances manufactures storage recommendations should be
strictly adhered to.Refer to relevant instructions for storage. Do not place
carbonated or fizzy drinks in the freeze compartment as it creates pressure on
the container,which may cause it to explode,resulting in damage to the
appliance. Frozen food can cause frost burns if consumed straight from the
freezer compartment. Do not place the appliance in direct sunlight. Keep
buring candles,lamps and other items with naked flames away from the appliance
so that do not set the appliance on fire. The appliance is intended for
keeping food stuff and/ or beverages in normal household as explained in this
instruction booklet The appliance is heavy.Care should be taken when moving
it. Do not remove nor touch items from the freezer compartment if your hands
are damp/wet,as this could cause skin abrasions or frost/freezer burns. Never
use the base,drawers, doors etc. to stand on or as supports. Frozen food must
not be refrozen once it has been thawed out. Do not consume ice popsicles or
ice cubes straight from the freezer as this can cause freezer burn to the
mouth and lips.
8
To avoid items falling and causing injury or damage to the appliance, do not
overload the door racks or put too much food in the crisper drawers.
WARNING – Food needs to be packed into bags before it is put into the
refrigerator. Liquids need to be stored in bottles or capped containers in
order to avoid a spill, as the design structure of the product is not easy to
clean. This refrigerating appliance is not intended to be used as a built-in
appliance.
Caution! Care and cleaning Before maintenance, switch off the appliance and
disconnect the mains plug from the mains socket. Do not clean the appliance
with metal objects, steam cleaner, ethereal oils, organic solvents or abrasive
cleansers. Do not use sharp objects to remove frost from the appliance. Use a
plastic scraper.
Installation Important! For electrical connection carefully, follow the
instructions given in this manual. Unpack the appliance and check if there are
damages on it. Do not connect the appliance if it is damaged. Report possible
damages immediately to the place you bought it. In this case retain packing.
It is advisable to wait at least four hours before connecting the appliance to
allow the oil to flow back in the compressor. Adequate air circulation should
be around the appliance, lacking this leads to overheating.To achieve
sufficient ventilation, follow the instructions relevant to
installation.Wherever possible the back of the product should not be too close
to a wall to avoid
9
touching or catching warm parts (compressor,condenser) to prevent the risk of
a fire, follow the instructions relevant to installation. The appliance must
not be locate close to radiators or cookers. Make sure that the mains plug is
accessible after the installation of the appliance Service Any electrical work
required to do the servicing of the appliance should be carried out by
qualified electrician or competent person. This product must be serviced by an
authorized Service Center, and only genuine spare parts must be used. 1. If
the appliance is Frost Free. 2 If the appliance contains freezer compartment.
Water dispenser cleaning (special for water dispenser products):
Clean water tanks if they have not been used for 48 h; flush the water system
connected to a water supply if water has not been drawn for 5 days. WARNING!
Food needs to be packed in bags before putting i nto the refrigerator, and
liquids need to be packed in b ottles or capped containers to avoid the
problem that that the product design structure is not easy to clean.
10
Proper Disposal of Your Old Refrigerator
WARNING
Suffocation Hazard
Before You Throw Away Your Old Refrigerator or
Freezer:
· Take off the doors. · Leave the shelves in place so that children may
not easily climb inside.
Remove doors from your old refrigerator. Failure to do so can result in death or brain damage.
Important information to know about disposal of refrigerants:
IMPORTANT: Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators are still dangerous even if they will sit for “just a few days.” If you are getting rid of your old refrigerator, please follow these instructions to help prevent accidents.
Dispose of refrigerator in accordance with Federal and Local regulations. Refrigerants must be evacuated by a licensed, EPA certified refrigerant technician in accordance with established procedures.
Parts and Features
A B C D E F G H I J
K
L
K
A Wi-Fi Module B Refrigerator Door Bin
C Rotary Separator D Refrigerator LED Light
and Control Panel E Water Tank
F G Refrigerator Light
H I J K
M N
O
P
L M Fridge Door Left N Fridge Door Right O My Fresh Choice Door P Freezer Door
Note: Your model may look different from this and other images in this
manual,depending on your model’s features.
Note: To get the best energy efficiency of this product, please place all
shelves, drawers on their original position as the illustration above.
11
Installation Requirements
Location Requirements
WARNING
Recommended Clearances A
Explosion and Fire Hazard Keep flammable materials and vapors, such as
gasoline, away from appliance. Failure to do so can result in death, explosion
or fire.
IMPORTANT: This refrigerator is designed for indoor, household use only.
Temperature This refrigerator is intended for use in a location where the
temperature ranges from a minimum of 16°C to a maximum of 43°C. The preferred
room temperature range for optimum performance, which reduces electricity
usage and provides superior cooling, is between 16°C and 32°C. It is
recommended that you do not install the refrigerator near a heat source, such
as an oven or radiator.
Exterior and Dimensions
914mm
A
B
C
725mm
A Refrigerator doors B My fresh chioce door C Freezer door
Ventilation Adequate air circulation around the refrigerator is required for
efficient operation. To ensure proper ventilation, maintain the recommended
clearances.
12
1785mm
B
C
C
A 100mm Above B 50mm Behind C 50mm Each Side
Note: If you place the refrigerator next to a fixed wall, leave 1471.4mm
minimum space to allow the door to swing open.
Electrical Requirements
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet. Do not remove the ground prong from the
power cord plug. Do not use an adapter. Do not use an extension cord. Failure
to do so can result in death, fire or electrical shock.
Before you move your refrigerator into its final location, it is important to
make sure you have the proper electrical connection.
Recommended Grounding Method
A 220-240 volt, 50 Hz, AC only 15- or 20-amp fused, grounded electrical supply
is required. It is recommended that a separate circuit serving only your
refrigerator be provided. Use an outlet that cannot be turned off by a switch.
Do not use an extension cord.
NOTE: Before performing any type of installation or cleaning, disconnect the
refrigerator from the electrical source. When you are finished, reconnect the
refrigerator to the electrical source and reset the temperature controls to
the desired setting.
Installation Instructions
Unpack the Refrigerator
WARNING
Fire or Explosion Hazard Do not puncture refrigerant tubing. Follow handling
instructions carefully. Flammable refrigerant used. Failure to do so can
result in death, explosion or fire.
IMPORTANT: Handle with care when moving refrigerator to avoid either damaging
the refrigerant tubing or increasing the risk of a leak.
WARNING
Excessive Weight Hazard Use two or more people to move and install
refrigerator. Failure to do so can result in back or other injury.
Remove the Packaging Remove tape and glue residue from surfaces before turning
on the refrigerator. Rub a small amount of liquid dish soap over the adhesive
with your fingers. Wipe with warm water and dry. NOTE: Do not use sharp
instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove
tape or glue. These products can damage the surface of your refrigerator. For
more information, see “Refrigerator Safety.” Dispose of/recycle all packaging
materials. If the refrigerator has been placed in a horizontal or tilted
position for any period of time wait 4 hours before plugging it in to allow
the oil to settle into the compressor.
When Moving Your Refrigerator: Your refrigerator is heavy. When moving the
refrigerator for cleaning or service, be sure to cover the floor with
cardboard or hardboard to avoid floor damage. Always pull the refrigerator
straight out when moving it. Do not wiggle or “walk” the refrigerator when
trying to move it, as floor damage could occur.
Clean Before Using After you remove all of the packaging materials, clean the
inside of the refrigerator before using it. See the cleaning instructions in
“Refrigerator Care.”
Important information to know about glass shelves and covers: Do not clean
glass shelves or covers with warm water when they are cold. Shelves and covers
may break if exposed to sudden temperature changes or impact, such as bumping.
Tempered glass is designed to shatter into many small, pebble-size pieces.
This is normal. Glass shelves and covers are heavy. Use both hands when
removing them to avoid dropping.
Installation Positioning
· This appliance performs well from N to ST. The appliance may not work properly if it is left for a longer period at a temperature above or below the indicated range.
Climate class
Ambient temperature
SN
+10°C to +32°C
N
+16°C to +32°C
ST
+16°C to +38°C
T
+16°C to +43°C
Complete the Installation
WARNING
Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove the
ground prong from the power cord plug. Do not use an adapter. Do not use an
extension cord. Failure to do so can result in death, fire or electrical
shock.
1. Plug into a grounded 3 prong outlet. NOTE: This refrigerator begins
operating as . soon as it is connected to the power supply
2. Move the refrigerator into its final location, making sure to maintain the
recommended clearance.
Level Refrigerator (if needed)
The refrigerator must be level to maintain optimal performance and appearance.
1. Turn the leveling feet on the bottom, front of the cabinet to raise or
lower that side of the refrigerator until the refrigerator is level side to-
side.
2. Turn both feet, by the same amount, to slightly raise the front of the
refrigerator. This will make it easier for the doors to close.
13
NOTE: Having someone push against the top of the refrigerator takes some
weight off the leveling feet. This makes it easier to turn the feet.
10mm to 15mm
automatically, tilt the top of your refrigerator backward about 10mm to 15mm.
If necessary, use a spanner wrench to adjust the feet.
Align Doors (if needed)
small gasket pcs
A Adjustable foot B Roller C Roller
A B
C
Rotate the adjustable feet clockwise to raise or raise counter-clockwise to lower your
refrigerator. To make sure that the doors close
Refrigerator Use
Opening and Closing Doors
Providing room for doors to open Make sure that you have enough room in front
of your refrigerstor to swing the doors open.
908mm
developing on the mullion. The temperature of the surface may be warm, which is normal, and will not affect the performance of the refrigerator.
1115mm 610mm
125°
125°
1471.4mm
The four doors can be opened and closed either separately or together.
There is a mullion on the left-hand side refrigerator compartment door. When
closing the left-hand door, the mullion folds behind the right-hand door
joining the two doors. The temperature of the door frame is controlled to help
prevent moisture from
14
NOTE: Before closing the left-hand door, make sure the mullion is folded inward. If the mullion is pulled outward it may become damaged when you try to close the door.
Water Dispenser
The water dispenser, located in fridge door, is used for storing drinking
water. This feature provides chilled water easily without opening
refrigerator. You should be informed of following tips.
Before using Please clean the water dispenser parts before using this appliance for the first time.
1. Hold two sides of the water tank tightly,
2
then pull up the water tank carefully by
shaking up and down.
2. Unscrew the head, then clean it, and
the inside of water tank (including large lid
and small lid).
3. Dry it in natural way or using a dryer.
Large lid Small lid
3
Head
Assembling After cleaning, please assemble these parts together, with reverse
sequence of cleaning procedure; and then fit them on the door according to the
following procedure.
1. Insert the head into the hole on the door. 2. Fit the tank along the
guides on the door. 3. Press down on the two side of the tank. 4. When you
hear a click sound, that means the installation is completed.
4
Filling water Before you fill the drinking water into the water tank, ensure
that the water tank is steady and in a correct position. Caution! Fill with
water up to 4L (which is
Head 1
Slot
Guide
15
suggested), and not above the level. Otherwise, it may overflow when the lid
is close. We recommend that you fill the water by the following ways. Open the
small lid by rotating it and fill water from the inlet of the large lid.
please remember to rotate the small lid back to its original position when
finish filling water.
Small lid
Large lid
Warning!
Don’t push the water dispenser lever forward without a cup below since it may
cause water spilling. To avoid cold air leaking out form cabinet, keep the
water dispenser parts (especially the water storage box and head) still be
installed even if the water dispenser was out of use.
Cleaning
1. Put the water tank out of the door carefully, and then wash the tank, lid,
and head lightly in water. 2. After you have successfully cleaned the
appliance, you should dry it by natural drying or using the dryer. 3. If you
have used the water dispenser for many times, the water in the receiving tank
may drop on the floor, which may make your floor wet, and you should clean the
tank with dry towel regularly before overflow.
Head
Warning! Don’t touch other parts when filling water, which may cause water
leakage. Other beverage (milk, juice, carbonated beverage etc.) were not
suggested to be filled in except for drinking water, especially beverage
including particles (which may result in function failure). Hot water was
forbidden to be filled into the water tank.
Receiving water You should use the correct cups to receive water underneath
the water dispenser.
Dispenser lever
Suggested position
16
Receiving tank
Using the Controls
Use your appliance according to the following control regulations, your
appliance has the corresponding functions and modes as the control panels
showed in the pictures below. When the appliance is powered on for the first
time, the backlighting of the icons on display panel starts working.If no
buttons have been pressed and the doors are closed, the backlighting will turn
off.
NO
A Power Icon B Power Control C Fridge Compartment
Temp Icon
D My Fresh Choice Compartment Temp Icon
E Freezer Compartment Temp Icon
F Zone Choice
G Celsius Indicator H Temperature I Temp Control J Super Cool Icon K Eco Icon
L Super Freeze Icon M Mode Control N Wi-Fi Control O Wi-Fi Icon
POWER
Press and hold ” ” button for 3 seconds to turn the power function on or off.
When the power function is on, the” ” icon lights and the display panel will
show ” “. NOTE: When the power function is on, the refrigerator is stopped
cooling.
Setting Compartment Temperatures When you set a temperature, you are setting
an average temperature for the entire compartment.The actual compartment
temperatures may vary from the temperatures displayed depending on the amount
and placement of stored food, and the surrounding room temperature.
Recommended Temperature Settings · Fridge Compartment: 4°C · Fresh Choice
Compartment: -7°C · Freezer Compartment: -18°C
Refrigerator (Fridge) Compartment Temperatur
1. Press ” ” button repeatedly until the Fridge ” ” icon appears.
2.When Fridge is on , ” “icon is illuminated and then press ” ” button
repeatedly to cycle through the available temperature settings from 8°C to
2°C.
NOTE: Each press of the button decrease the setting by one degree.
8°C 7°C 6°C 5°C
2°C 3°C 4°C
3. Release the ” ” button control when the desired temperature setting
appears.
My Fresh Choice Compartment Temperature 1. Press ” ” button repeatedly until
the
My Fresh Choice ” ” icon appears. 2.When My Fresh Choice is on, ” ” icon is
illuminated and then press ” ” button repeatedly to cycle through the
available temperature settings from 5°C to -18 °C. NOTE: Each press of the
button decreases the setting by one degree.
5°C 4°C …….
-18°C -17°C 3. Release the ” ” button control when
the desired temperature setting appears.
Freezer Compartment Temperature 1. Press ” ” button repeatedly until the
Freezer ” ” icon appears. 2.When Freezer is on, ” ” icon is illuminated
and then press ” ” button repeatedly to cycle through the available
temperature settings, from -14°C to -24°C . NOTE: Each press of the button
decreases the setting by one degree.
-14°C -15°C …….
-24°C -23°C
3. Release the ” ” button control when the desired temperature setting
appears.
17
Super Cool
The Super Cool feature helps to keep food stored in the refrigerator at the
set temperature during periods of high usage, large grocery loads, or
temporarily warm room temperatures. The Super Cool feature lowers the
temperature in the fridge compartment. 1. Press the ” ” button to activate
this
function. The ” ” icon will be illuminated and the fridge temperature
indicator will display 2°C. 2.Super cool will automatically turn off after 3
hours. 3.When super cool function is on you can turn it off by pressing the ”
” button or setting fridge temperature. To manually turn off the Super Cool
function, the fridge temperature setting will revert back to the previous
setting.
Super Freeze
Super Freeze will quickly lower the temperature within the freezer so food
will freeze faster than usual. This feature also helps to keep vitamins and
nutrition of fresh food fresh for longer period. 1. Press ” ” button
repeatedly until the
Super Freeze icon appears. Press the ” ” button to activate this function. The
” ” icon will be illuminated and the temperature for the freezer is set to
-24°C. 2.Super freeze will automatically turn off after 52 hours. 3.When Super
Freeze function is on you can turn it off by pressing the ” ” button or
setting freezer temperature. To manually turn off the Super freeze function,
the freezer temperature setting will revert back to the previous setting.
NOTE: When you selecting the Super Freeze function, ensure there are no
bottled or canned drinks (especially carbonated drinks) in the freezer
compartment. Bottles and cans may explode.
Eco
Press the ” ” button to turn on the Eco function, the ” ” icon will be
illuminated. When the Eco function is on, the temperature of fridge is
automatically switched to 6°C and the temperature of freezer is automatically
switched to -17°C, the temperature of My Fresh Choices is compartment is
immovability. When Eco function is on, you can switch it by pressing the ” ”
button or adjusting the fridge/freezer temperature, the refrigerator
temperature setting will revert back to the previous setting.
Door Open Alarm
If a door is open for longer than 2 minutes, an alarm will sound to alert you
and the control panel will display ” “. The alarm will sound 3 times every
minute for 8 minutes. · To turn off the alarm, close all doors
completely.
Demo mode Demo mode is for store display, and it prevents the refrigerator
from generating cool air. In this of Cooling off Mode, the refrigerator may
seem like it is working but it will not make cool air. The display panel will
show special segments as follow.
To switch off demo mode, press and hold ” ” And ” ” buttons at same time for 3
seconds and the buzzer gave a long sound.
Wi-Fi function This appliance may be controlled remotely with a smart phone or
a tablet computer. If the appliance is not connected to the home network, it
will function like a regular appliance.
What do you need to connect the appliance? · Signal from the local wireless
network (Wi-Fi)
should be sufficiently strong in the spot where the appliance is installed. ·
Home network router has to be connected to the internet, and the Wi-Fi
function on the appliance should be activated. · The smart phone/tablet
computer has to be connected to the internet. · Operating system on your smart
phone/tablet computer should be compatible with the ConnectLife app.
APPLIANCE Wi-Fi STATE There are three Wi-Fi states as shown below, you can
activate the display board according to the relevant steps.
· CONNECT APPLIANCE TO Wi-Fi After activating the Wi-Fi function, connect your
device to your home router in order to connect your appliance with the
ConnectLife mobile app. Step 1: Set the appliance to normal operation. Touch
the ” ” key for approximately 3 seconds. You entered network connection menu
when ” ” appears in the display. Step 2: Touch the ” ” key to select ” ”
within 60 seconds. Step 3: Touch the ” ” key to confirm the selection mode.
The Wi-Fi symbol starts blinking and the network of this appliance is on to
connect for 5 minutes.
Step 4: When the Wi-Fi symbol is on, it means that the Wi-Fi connection is
successful. The display will return to normal.
· MULTI-USER PAIR APPLIANCE The appliance can be paired with your mobile
device. Simply pair another user to your appliance. This requires, that your
appliance was already set up before and is connected to your home network. If
not, go back and select SET UP APPLIANCE. Step 1: Set the appliance to normal
operation. Touch the ” ” key for approximately 3 seconds. You entered network
connection menu when ” ” appears in the display. Step 2: Touch the ” ” key to
select ” ” within 60 seconds. Step 3: Touch the ” ” key to confirm the
selection mode. The PAIR network of this appliance is now open to connect to,
for 5 minutes. Step 4: When the display returns to normal, it means the PAIR
connection is successful.
· UNBIND ALL USERS OF APPLIANCE By activating this function, the user
information stored in the appliance will be deleted, the appliance will be
removed from all paired app user accounts. Step 1: Set the appliance to normal
operation. Touch the ” ” key for approximately 3 seconds. You entered network
connection menu when ” ” appears in the display. Step 2: Touch the ” ” key to
select ” ” within 60 seconds. Step 3: Touch the ” ” key to confirm the
selection mode to realize unbinding, and the distribution network time is up
to 5 minutes. Step 4: After the device is unbound, it will automatically enter
the distribution network state, the ” ” icon flashes, and the distribution
network time is up to 5 minutes.
Information!
We recommend downloading and installing the mobile app and creating a
ConnectLife account before attempting to set up the connection with your
appliance.
ConnectLife App The ConnectLife App is available to download free of charge
from the Apple App Store or from the Google Play Store.
Installing the ConnectLife app Go to the App Store (on Apple devices),
1. AppGallery (on Huawei devices) or Google Play Store (on Android devices)
on your phone/tablet computer.
2.Search for “ConnectLife”.
3.Choose the ConnectLife app and install it on your smart phone/tablet
computer.
Add Refrigerator on APP 1. Select Add appliances’ or
+’ in the upper right
corner. 2. Select Refrigerator’. 3. Open the Camera on App to scan the appliance SN code(barcode). The 23-bit barcode can be found under the data plate on the inside of the refrigerator. 4\. Select
SET UP APPLIANCE’, follow the instruct and make sure Wi-Fi
function of the appliance is activated, then select ‘Next’. Note: When the
appliance has connected to the home network and other users want to pair the
same appliance, they can directly select `PAIR APPLIANCE’ to bind. 5. Turn on
bluetooth as prompted, you are now presented with the appliance (refrigerator
HIS -XXXX), then select it. 6. Select secure Wi-Fi option, input the password
and connect. 7. Select the location of appliance and save. 8. Add successful,
you are now able to control appliance remotely.
NOTE: Please store different foods according to the compartments or target
storage temperature of your purchased products. ·If the refrigerating
appliance is left empty for long periods, switch off, defrost, clean, dry, and
leave the door open to prevent mould developing within the appliance.
Water dispenser cleaning(special for water dispenser products): ·Clean water
tanks if they have not been used for
48 h; flush the water system connected to a water supply if water has not been
drawn for 5 days.
WARNING! Food needs to be packed in bags before putting into the refrigerator,
and liquids need to be packed in bottles or capped containers to avoid the
problem that the product design structure is not easy to clean.
This product contains a light source of energy refrigerating chamber.
25
Disposal of the Appliance
DANGER
It is prohibited to dispose of this appliance as household waste.
Packaging materials
Packaging materials with the recycle symbol are recyclable. Dispose of the
packaging into a suitable waste collection container to recycle it.
Before disposal of the appliance
1. Pull out the main plug from the main socket. 2. Cut off the power cord and
discard with the main plug.
WARNING
Refrigerators contain refrigerant and gases in the insulation. Refrigerant and
gases must be disposed of professionally as they may cause eye injuries or
ignition. Ensure that tubing of the refrigerant circuit is not damaged prior
to proper disposal.
Correct Disposal of this product
This symbol on the product or in its packing indicates that this product may
not be treated as household waste. Instead, it should be taken to the
appropriate waste collection point for the recycling of electrical and
electronic equipment. By ensuring this product is disposed of correctly, you
will help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by the inappropriate waste
handling of this product. For more detailed information about the recycling of
this product, please contact your local government, your household waste
disposal service, or the shop where you purchased the product.
26
Hisense Service Help Line:0191 387 0804
Hisense life reimogined
Hisense UK Ltd Ground floor Munroe Court White Rose Office Park Millshaw Park
Lane Leeds LS11 0EA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>