MONTEAUX BAL-911 4 Light Beaded Chandelier User Guide
- October 30, 2023
- MONTEAUX
Table of Contents
MONTEAUX BAL-911 4 Light Beaded Chandelier
THANK YOU
We appreciate the trust and confidence you have placed in Monteaux™ Lighting
through the purchase of this light. We strive to continually create quality
products designed to enhance your home. Visit us online to see our full line
of products available for your home improvement needs. Thank you for choosing
Monteaux™ Lighting!
Product Information
- Item #: 1001721111
- Model #: BAL-911
- Brand: MonteauxTM Lighting
Contact Customer Service at 1-800-446-9092 for questions, problems, or missing parts. The product comes with a warranty. Contact Customer Service for more information.
Safety Information
- Consult a qualified electrician if you have any electrical questions.
CAUTION: Inspect the wire insulation for any cuts, abrasions, or exposed
copper that may have resulted during shipping. If there is a defect in the
wire, do not attempt installation. Please call our Customer Service Team at
1-800-446-9092.
WARNING: Before starting installation of this fixture or removal of a
previous fixture, disconnect the power by turning off the circuit breaker or
by removing the fuse at the fuse box.
Warranty
The manufacturer warrants this lighting fixture to be free from defects in
materials and workmanship for a period of one (1) year from date of purchase.
This warranty applies only to the original consumer purchaser and only to
products used in normal use and service. If this product is found to be
defective, the manufacturer’s only obligation, and your exclusive remedy, is
the repair or replacement of the product at the manufacturer’s discretion,
provided that the product has not been damaged through misuse, abuse,
accident, modifications, alterations, neglect, or mishandling. This warranty
shall not apply to any product that is found to have been improperly
installed, set-up, or used in any way not in accordance with the instructions
supplied with the product. This warranty shall not apply to a failure of the
product as a result of an accident, misuse, abuse, negligence, alteration,
faulty installation, or any other failure not relating to faulty material or
workmanship. This warranty shall not apply to the finish on any portion of the
product, such as surface and/or weathering, as this is considered normal wear
and tear. The manufacturer does not warrant and specially disclaims any
warranty, whether express or implied, of fitness for a particular purpose,
other than the warranty contained herein. The manufacturer specifically
disclaims any liability and shall not be liable for any consequential or
incidental loss or damage, including but not limited to any labor / expense
costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-800-446-9092.
Pre-Installation
PLANNING INSTALLATION
- Read all instructions before installation.
- To avoid damaging this product, assemble it on a soft, non-abrasive surface, such as carpet or cardboard.
- Keep your receipt and these instructions for proof of purchase.
TOOLS REQUIRED
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
| Part | Description | Quantity |
|---|---|---|
| AA | Mounting unit | 1 |
| BB | Mounting screw | 2 |
| CC | Wire nut | 3 |
| DD | Set screw | 2 |
PACKAGE CONTENTS
| Part | Description | Quantity |
|---|---|---|
| A | Light fixture | 1 |
| B | Beaded string | 40 |
| C | Loop ring | 1 |
| D | Metal ring | 1 |
| E | Finial | 1 |
| F | Canopy | 1 |
| G | Chain (w/ quick connector) | 1 |
Installation
-
Assembling the light fixture
- Secure the center rod to and large metal ring to the light fixture (A) then attach the loop ring (C)
- Attach the metal ring (D) to the bottom of the light fixture (A) and attach the finial (E) to the metal ring (D).
- Secure the chain (G) to the loop ring (C) and the canopy (F).
NOTE: Ensure the quick connector is fully closed when installing the chain.
-
Attaching the mounting unit and canopy to the junction box
- Attach the mounting unit (AA) to the junction box (not included) with the mounting screws (BB).
-
Making the electrical connections
- Connect the copper wire from the light fixture (A) to the mounting unit (AA) by securing it with the preinstalled ground screw.
- Connect the black to black (power), the white to white (neutral) and copper wire to ground wire with the wire nuts (CC) and secure with electrical tape (not included).
NOTE: If the wires from the fixture are the same color, attach the side with markings or letters to the black (positive) wire and the other to the white (neutral) wire.
-
Installing the light fixture
- Secure the canopy (F) to the junction box by placing it over the mounting unit (AA) and securing it with the set screws (DD).
-
Installing the light bulbs
- Install four E12 candelabra 60-watt bulbs (not included).
- Install the beaded strings (B) by hooking each end the large metal ring on the light fixture (A) and the lower metal ring (D).
Operation
- Turning the light on
- Turn the light switch on to activate the fixture.
Care and Cleaning
- Clean the lamp with a soft, dry cloth.
- Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Troubleshooting
Questions, problems, missing parts? Before returning to the store,
call Monteaux Lighting™ Customer Service
8 a.m. – 6 p.m., EST, Monday-Friday
1-800-446-9092
Retain this manual for future use.
Please contact 1-800-446-9092 for further assistance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>