MONTEAUX LIGHTING HS-8525-S BK 1 Light Pendant User Guide
- July 15, 2024
- MONTEAUX LIGHTING
Table of Contents
Item # 1011690476
Model # HS-8525-S BK
USE AND CARE GUIDE
1-LIGHT PENDANT Questions, problems, missing parts? Before returning to
the store,
call Monteaux™ Lighting Customer Service
8 a.m. – 6 p.m., EST, Monday-Friday
1-800-446-9092
HS-8525-S BK 1 Light Pendant
THANK YOU
We appreciate the trust and confidence you have placed in Monteaux™ Lighting
through the purchase of this light. We strive to continually create quality
products designed to enhance your home. Visit us online to see our full line
of products available for your home improvement needs. Thank you for choosing
Monteaux™ Lighting!
Safety Information
Consult a qualified electrician if you have any electrical questions.
CAUTION: Inspect the wire insulation for any cuts, abrasions, or exposed
copper that may have resulted during shipping. If there is a defect in the
wire, do not attemptinstallation. Please call our Customer Service Team at
1-800-446-9092.
WARNING: Before starting installation of this fixture or removal of a
previous fixture, disconnect the power by turning off the circuit breaker or by
removing the fuse at the fuse box.
Warranty
The manufacturer warrants this lighting fixture to be free from defects in
materials and workmanship for a period of one (1) year from date of purchase.
This warranty applies only to the original consumer purchaser and only to
products used in normal use and service. If this product is found to be
defective, the manufacturer’s only obligation, and your exclusive remedy, is
the repair or replacement of the product at the manufacturer’s discretion,
provided that the product has not been damaged through misuse, abuse,
accident, modifications, alterations, neglect, or mishandling. This warranty
shall not apply to any product that is found to have been improperly
installed, set-up, or used in any way not in accordance with the instructions
supplied with the product. This warranty shall not apply to a failure of the
product as a result of an accident, misuse, abuse, negligence, alteration,
faulty installation, or any other failure not relating to faulty material or
workmanship. This warranty shall not apply to the finish on any portion of the
product, such as surface and/or weathering, as this is considered normal wear
and tear. The manufacturer does not warrant and specially disclaims any
warranty, whether express or implied, of fitness for a particular purpose,
other than the warranty contained herein. The manufacturer specifically
disclaims any liability and shall not be liable for any consequential or
incidental loss or damage, including but not limited to any labor / expense
costs involved in the replacement or repair of said product.
Contact the Customer Service Team at
1-800-446-9092.
Pre-Installation
PLANNING INSTALLATION
- Read all instructions before installation.
- To avoid damaging this product, assemble it on a soft, non-abrasive surface, such as carpet or cardboard.
- Keep your receipt and these instructions for proof of purchase.
TOOLS REQUIRED HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
| Part | Description | Quantity |
|---|---|---|
| AA | Mounting unit | 1 |
| BB | Mounting screw | 2 |
| CC | Wire nut | 3 |
| DD | Cap nut | 2 |
PACKAGE CONTENTS
| Part | Description | Quantity |
|---|---|---|
| A | Light fixture | 1 |
| B | Shade | 1 |
Installation
-
Attaching the mounting unit to the junction box
Attach the mounting unit (AA) to the junction box (not included) with mounting screws (BB).
NOTE: The pre-installed support screws on the mounting bracket (AA) should protrude out away from the junction box. -
Making the electrical connections
Connect the copper wire on the light fixture (A) to the mounting unit (AA) by securing it with the pre-installed ground screw.
Connect the black to black wire (power), the white to white wire (neutral), and the copper wire to the ground wire with wire nuts (CC) and secure with electrical tape (not included).
NOTE: If the wires from the fixture are the same color, attach the side with markings or letters to the black(positive) wire and the other to the white (neutral) wire. -
Securing the canopy to the junction box
Secure the canopy of the light fixture (A) to the junction box by placing the holes in the canopy over the support screws on the mounting unit (AA). Secure with the cap nuts (DD) as shown. -
Installing the light bulbs
Install one E26 40-watt bulb (not included).
Install the shade (B) onto the light fixture (A)
Operation
Turning the light on
- Turn the light switch on to activate the fixture.
Care and Cleaning
- Clean the lamp with a soft, dry cloth.
- Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| The bulb will not light. | The bulb is burned out. | Replace the light bulb. |
| The power is off. | Ensure the power supply is On. | |
| There is a faulty wire connection. | Check the wiring. | |
| The circuit breaker is off. | Ensure the circuit breaker is in the On position. | |
| The fuse blows or circuit breaker trips when the light is turned on. | There | |
| are crossed wires or the power wire is grounding out. | Check the wire |
connections.
Contact a qualified electrician or call the Customer Service Team at
1-800-446-9092.
Questions, problems, missing parts? Before returning to the store,
call Monteaux Lighting™
Customer Service 8 a.m. – 6 p.m., EST, Monday-Friday
1-800-446-9092
Retain this manual for future use.
Documents / Resources
|
MONTEAUX LIGHTING HS-8525-S BK 1 Light
Pendant
[pdf] User Guide
HS-8525-S BK 1 Light Pendant, HS-8525-S BK, 1 Light Pendant, Light Pendant,
Pendant
---|---