MONTEAUX LIGHTING BAL-915 1 Light White Rope Basket Pendant Light with Woven Shade User Guide
- October 30, 2023
- MONTEAUX LIGHTING
Table of Contents
MONTEAUX LIGHTING BAL-915 1 Light White Rope Basket Pendant Light with
Woven Shade
THANK YOU
We appreciate the trust and confidence you have placed in Monteaux™ Lighting
through the purchase of this light. We strive to continually create quality
products designed to enhance your home. Visit us online to see our full line
of products available for your home improvement needs. Thank you for choosing
Monteaux™ Lighting!
Product Information
This product is a light pendant from MonteauxTM Lighting, with item number of 1001721112 and model number of BAL-915. The light pendant is designed for indoor use only and comes with a light fixture (A), shade (B), and lock ring (C). The package also includes a mounting unit (AA), mounting screws (BB), wire nuts (CC), and screws (DD). The product comes with a Customer Service Team that can be reached at 1-800-446-9092 for questions, problems, or missing parts. The user manual includes safety information, warranty details, and pre- installation instructions.
Safety Information
- Consult a qualified electrician if you have any electrical questions.
- CAUTION: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation. Please call our Customer Service Team at 1-800-446-9092.
- WARNING: Before starting the installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
Warranty
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of one (1) year from date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect, or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear. The manufacturer does not warrant and specially disclaims any warranty, whether express or implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor / expense costs involved in the replacement or repair of said product. Contact the Customer Service Team at 1-800-446-9092.
Pre-Installation
PLANNING INSTALLATION
- Read all instructions before installation.
- To avoid damaging this product, assemble it on a soft, non-abrasive surface, such as carpet or cardboard.
- Keep your receipt and these instructions for proof of purchase.
- For indoor use only
TOOLS REQUIRED
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
| Part | Description | Quantity |
|---|---|---|
| AA | Mounting unit | 1 |
| BB | Mounting screw | 2 |
| CC | Wire nut | 3 |
| DD | Screw | 2 |
PACKAGE CONTENTS
| Part | Description | Quantity |
|---|---|---|
| A | Light fixture | 1 |
| B | Shade | 1 |
| C | Lock ring | 1 |
Installation
-
Attaching the mounting unit to the junction box
- Attach the mounting unit (AA) to the junction box (not included) with mounting screws (BB).
-
Making the electrical connections
- Connect the copper wire on the light fixture (A) to the mounting unit (AA) by securing it with the pre-installed ground screw.
- Connect the black to black wire (power), the white to white wire (neutral), and the copper wire to the ground wire with wire nuts (CC) and secure with electrical tape (not included).
NOTE: If the wires from the fixture are the same color, attach the side with markings or letters to the black (positive) wire and the other to the white (neutral) wire.
-
Securing the light fixture
- Secure the light fixture (A) to mounting unit (AA) with the screws (DD).
-
Installing the light bulb
- Insert the socket ring (C) into the shade (B), placing the tapered side first. Secure the shade (B) to the light fixture (A) using the socket ring (C).
- Install one E26 60-watt bulb (not included).
Operation
- Turning the light on
- Turn the light switch on to activate the fixture.
Care and Cleaning
- Clean the lamp with a soft, dry cloth.
- Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Troubleshooting
Questions, problems, missing parts? Before returning to the store, call
Monteaux Lighting™ Customer Service
8 a.m. – 6 p.m., EST, Monday-Friday
1-800-446-9092