OPTONICA LED 5460 Solar Light Instruction Manual

5460 Solar Light Instruction
Manual

5460 Solar Light

Applicable model
5460
5461
5462
5463
Remote control key instructions

Installation Guide

Tips The battery must be fully charged before using 3.5 rainy days.
Installation Notes

1. Sotar lights in the factory has been charged with electricity, you can normally light, please check the lights before installation Whether it is working properly;

2. The lamp and solar panels connected to the solar panel against the light ,the light does not shine ,unplug the connector light ,Light sense normal:

3. 0n the front of the lamp.5meters above the lights byAUTO(red),the button lights flash 5 under the lights and remote control is normal;
   Note: the remote control must be remote control receiver or remote control is not sensitive remote control distance 8-15m;

4. A. the lamp with two Inflated studs on the wall as schematically: B. The solar panel Angle adjusts according to the light intensity and time; C. lamps can mot be installed in low-lying areas ,so as not to soak;

5. Plug the male and female plugs and tighten the waterproof cap and install it.

6. After installation check the installation is solid ,use the remote control of the lamp to check.

Applicable model
9135
9136
Remote control key instructions
Usage method
**functional modes**

1. First mode: Long press 5.8 seconds-Radar mode, Moving objects Into the sensing area, All the lights are on. Leave sensing area ,Light openingthumen sensor is effective)
2. Second mode(lseconds press):light on medium bringhtness (Radarinductions is not effective)
3. Third mode(lseconds press):off

Installation Guide

Installation method

1. To adjust the desired pattern
2. Th lamp mounted to the Arm.Adjusting Inner fax angle Screw (solar Wets toward the sun)
3. The arm ISmounted to the wall or pole medium b ightness(Radarinduction is not

Applicable model
9137
9138
Remote control key instructions
Installation Guide
Tips The battery must be fully charged before using 3-5 rainy days.
Installation Notes

1. Solar lights in the factory has been charged with electricity, you can normally light, please check the lights before installation Whether it is working properly:

2. The lamp and solar panels connected to the solar panel against the light .the light does not shine ,unplug the connector light ,Light sense normal;

3. 0n the front of the lamp,5meters above the lights by AUTO(red),the button lights flash 5 under the lights And remote control is normal:
   Note: the remote control must be remote control receiver .or remote control Is not sensitive remote control distance 8-15m:

4. A. the lamp with two inflated studs on the wall as schematically: B. The solar panel Angle adjusts according to the light intensity and time; C. lamps can mot be installed in low-lying areas ,so as not to soak;

5. Plug the male and female plugs and tighten the waterproof cap and install it.

6. After installation check the Installation is solid use the remote control of the lamp to check:

Applicable model
9137
9138 List Applicable model
9135
9136 List Applicable model
5460
5461
5462
5463 List

Product warranty card

Hello! Thank you very much for your purchase of our company’s solar lights. To Provide you with quality products and after-sales service, and fully protect your consumer rights and interests Is our company in accordance with relevant state regulations,the implemen – tation of the obligations. Therefore , the following warranty service terms : service commitment : are entitled to”one month replacement , one year to protect all the strength of the solar lights .the service.” “Repair or Undertaking’Ordinance:since the date kf purchase within one month,after the inspection by our company is indeed the quality of the product itself,unconditional replacement of the same model of products,back and forth freight borne by our company If there is no problem or man-made damage to the product,the return freight will be borne by the customer and the maintenance fee will be charged. Warranty Ordinance:

1. Any normal use of quality problems, from the date of purchase within one year can enjoy free warranty service, back and forth freight will be borne by our department. If there is no problem or man-made damage to the product, the return freight will be borne by the customer and the maintenance fee will be charged.
2. Product appearance damage, etc do not implement the replacement policy.
3. Product accessories and gifts are not included in the package, warranty or repair scope.
4. The customer can enjoy the after-sale service on the basis of warranty card and purchase voucher.

Fourth , in the following circumstances, the company only provides the warranty card auto – matic failure, repair service:

1. The warranty card or purchase certificate is lost ,altered or expired;
2. Due to natural disasters .man-made or improper operation and other on-product itself:
3. Products were not authorized by our department to repair, disassemble or refit:
4. The appearance of the product is seriously damaged or unrecognized.
5. Beyond the warranty period.

User information| User name:
address:| Telephone:
---|---|---

First after service record

Second after sale service record

IMPORTER: Prima Group 2004 LTD, Bulgaria, 1784 Sofia. Mladost 1, bl. 144.
Ground Floor; Phone: +359 2 988 45 72;

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>