MONTEAUX LIGHTING BAL-718 6-Light Chandelier User Guide

October 30, 2023
MONTEAUX LIGHTING

MONTEAUX LIGHTING BAL-718 6-Light Chandelier

Questions, problems, missing parts? Before returning to the store, call Monteaux™ Lighting Customer Service 8 a.m. – 6 p.m., EST, Monday-Friday 1-800-446-9092

THANK YOU
We appreciate the trust and confidence you have placed in Monteaux™ Lighting through the purchase of this light. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Monteaux™ Lighting!

Safety Information

  • Consult a qualified electrician if you have any electrical questions.
  • CAUTION: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation. Please call our Customer Service Team at 1-800-446-9092.
  • WARNING: Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.

Warranty

The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of one (1) year from date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifica-tions, alterations, neglect, or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear. The manufacturer does not warrant and specially disclaims any warranty, whether express or implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor / expense costs involved in the replacement or repair of said product. Contact the Customer Service Team at 1-800-446-9092.

Pre-Installation

PLANNING INSTALLATION

  • Read all instructions before installation.
  • To avoid damaging this product, assemble it on a soft, non-abrasive surface, such as carpet or cardboard.
  • Keep your receipt and these instructions for proof of purchase.

TOOLS REQUIRED

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

Part Description Quantity
AA Mounting unit 1
BB Mounting screw 2
CC Wire nut 3
DD Cap nut 2
EE G9 75W bulb 6
Pre-Installation (continued) Pre-Installation (continued)

PACKAGE CONTENTS

Part Description Quantity
A Light fixture 1
B Finial 6
C Shade 6
D Loop ring 1
E Long rod 3
F Short rod 1
G Canopy 1

Installation

Assembling the light fixture

  • Attach the finials (B) on to the light fixture (A).
  • Screw the long rods (G) to the top of the light fixture (A). Then screw in the remaining short rod (F). Make sure to feed the branch wires through the rods during assembly.
  • Secure the metal ring (D) to the short rod (F) and attach the other end to the canopy (G).

NOTE: Before assembling the rods with the branch wire, choose the number of tubes to adjust the height.

Attaching the mounting unit to the junction box

  • Attach the mounting unit (AA) to the junction box (not included) with mounting screws (BB).

NOTE: The pre-installed support screws on the mounting bracket (AA) should protrude out away from the junction box.

Making the electrical connections

  • Connect the copper wire on the light fixture (A) to the mounting unit (AA) by securing it with the pre-installed ground screw.
  • Connect the black to black wire (power), the white to white wire (neutral), and the copper wire to the ground wire with wire nuts (CC) and secure with electrical tape (not included).

NOTE: If the wires from the fixture are the same color, attach the side with markings or letters to the black (positive) wire and the other to the white (neutral) wire.

Securing the light fixture

Secure the light fixture (A) to the junction box by placing the canopy (E) over the support screws on the mounting unit (AA) and securing it with the cap nuts (DD).

Installing the light bulbs

  • Install six G9 75-watt bulbs (EE).
  • Secure the shades (C) to the light fixture (A).

Operation

Turning the light on

  • Turn the light switch on to activate the fixture.

Care and Cleaning

  • Clean the lamp with a soft, dry cloth.
  • Do not use any cleaners with chemicals, solvents, or harsh abrasives.

Troubleshooting

Questions, problems, missing parts? Before returning to the store, call Monteaux Lighting™ Customer Service 8 a.m. – 6 p.m., EST, Monday-Friday 1-800-446-9092 Retain this manual for future use.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals