VISUAL COMFORT MF 3638 Nora Medium Table Lamp Instruction Manual
- October 30, 2023
- VISUAL COMFORT
Table of Contents
VISUAL COMFORT MF 3638 Nora Medium Table Lamp
Product Information
The Nora Medium Table Lamp (Item # MF 3638) is a stylish and functional table lamp that requires assembly before use. The lamp comes with multiple parts, including the harp, saddle, finial, shade, and protective cover. The lamp is designed for use with a light bulb, which is not included in the packaging. The lamp should be installed in accordance with all applicable local installation codes and by a person familiar with the construction and operation of it, as well as the hazards involved.
Tools Required for Assembly
Scissors (not included in the package)
Product Usage Instructions
- Carefully remove all parts from the box and place them on a clean, soft surface.
- Install the harp (C) by squeezing it together and inserting it into the top of the saddle (D).
- Remove the finial (A) from the harp (C).
- Remove the shade (B) from the packaging and install it to the harp (C) using the finial (A). If the shade has additional packaging, carefully cut it off from the interior of the shade to avoid damages.
- Install a light bulb into the socket.
- Remove the protective cover (E) from the plug.
- Plug the lamp into an electrical outlet and test the fixture.
Care Instructions
Clean the lamp only with a soft dry cloth or feather duster. Do not use
abrasive or chemical agents.
Note:
This light fixture is listed and certified for use in the United States (US)
and is LED-compatible.
NOTICE
This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install it. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED):
- Scissors
ASSEMBLY INSTRUCTIONS
-
Carefully remove all parts from the box. Place on a clean, soft surface.
-
Install harp (C) by squeezing it together and inserting it into the top of the saddle (D).
-
Remove finial (A) from harp (C).
-
Remove shade (B) from packaging and install to harp (C) using finial (A).
NOTE: If the shade has additional packaging, carefully cut it off from the interior of the shade to avoid damage. -
Install a light bulb into the socket.
-
Remove the protective cover (E) from the plug.
-
Plug into an electrical outlet and test the fixture.
Care Instructions
Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.