PoKat AMZ-T1029AW 24 Inch 3 Way Dimmable Touch Table Lamp User Manual
- June 14, 2024
- PoKat
Table of Contents
PoKat AMZ-T1029AW 24 Inch 3 Way Dimmable Touch Table Lamp
Dear Customer,
Thank you for purchasing our products. As a reliable seller, we are always
striving to provide customers with 100% satisfactory products and services, so
we hope that you can get the same feeling in this shopping experience. To
serve you well is all our pursuit. If you find any damage or dissatisfaction
after receiving the product, you are welcome to contact us for the first time
via email at pokatcare@163.com, and we will
provide you with a 100% satisfactory solution. And if you would like to
register for a 1-year warranty extension, contact us within one month, please.
If you are satisfied with our products and services, I hope you can leave us a comment at your convenience. I think your comment will be a reference for other users in the future, and other customers will be very grateful to you.
CAUTION
This portable lamp has a polarized plug (one blade is wider than the other) as
a safety feature to reduce the risk of electric shock. This plug will fit in a
polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician.
Never use an extension cord unless the plug can be fully inserted. Do not
alter the plug.
What’s In The Box
Assembly Instructions
-
Step 1
Please note that the bottom of the shade is longer than the top. Align the shade’s longer side with Ring C and the shorter side with Ring B.Stick the pieces on the bottom and top of the shade to both Rings. -
Step 2
Roll both rings all the way around and make sure all the velcro on the shade is secure onto both Rings. -
Step 3
Secure the shade by pressing along the velcro. -
Step 4
Finished as above picture.
- Please take out all of the lamp parts from the package, and carefully lay all parts out in a line on a flat surface.
- Screw the Saddle(B) into the lamp body(A) clockwise.
- lnsert the Harp(C) into the saddle(B).
- Take down the Finial(E), Put the Shade (D) into Harp(C), then tighten Shade (D) by Finial (E).
- Install BULB see relampinglabelat socket area or packaging for the maximum allowed watt age.
- Your lamp is now completely assembled.
WARRANTY
All lamps promised a 1-year warranty. No matter what kind of problem you might have, you are free to contact us and get our support.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>