VISUAL COMFORT MF3001PWR-L Avedon Medium Table Lamp Instruction Manual
- October 30, 2023
- VISUAL COMFORT
Table of Contents
VISUAL COMFORT MF3001PWR-L Avedon Medium Table Lamp
Product Information
Avedon Medium Table Lamp Item # MF 3001
The Avedon Medium Table Lamp is a high-quality lighting fixture suitable for use in any room. The lamp is sold with all necessary parts and assembly instructions. The lampshade (B) is packaged separately from the rest of the parts. The lamp requires a light bulb, which is not included. The lamp is listed for use in the US.
Product Usage Instructions
- Inspect the contents of the package carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
- Carefully remove all parts from the box and place them on a clean, soft surface.
- Install the harp (C) by squeezing it together and inserting it into the top of saddle (D).
- Remove the finial (A) from the harp (C).
- Remove the shade (B) from its packaging and install it to the harp (C) using finial (A). If the shade has additional packaging, carefully cut it off from the interior of the shade to avoid damages.
- Install a light bulb into the socket.
- Remove the protective cover (E) from the plug.
- Plug the lamp into an electrical outlet and test the fixture.
Note:
This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
NOTICE:
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction and
operation of it, as well as the hazards involved. Inspect item and contents
carefully. If any damage or defect is found, do not install. Retain all
packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED)
Scissors
-
Carefully remove all parts from the box. Place on a clean, soft surface.
-
Install harp (C) by squeezing together and inserting into the top of saddle (D).
-
Remove finial (A) from harp (C).
-
Remove shade (B) from packaging and install to harp (C) using finial (A).
NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. -
Install light bulb into the socket.
-
Remove protective cover (E) from plug.
-
Plug into electrical outlet and test the fixture.
Care Instructions
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
ASSEMBLY INSTRUCTIONS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>